Enhancing Life-Cycle Inventories via Reconciliation with the Laws of Thermodynamics

Abstract: Obtaining reliable results from life-cycle assessment studies is often quite difficult because life-cycle inventory (LCI) data are usually erroneous, incomplete, and even physically meaningless. The real data must satisfy the laws of thermodynamics, so the quality of LCI data may be enhanced by adjusting them to satisfy these laws. This is not a new idea, but a formal thermodynamically sound and statistically rigorous approach for accomplishing this task is not yet available. This article proposes such an approach based on methods for data rectification developed in process systems engineering. This approach exploits redundancy in the available data and models and solves a constrained optimization problem to remove random errors and estimate some missing values. The quality of the results and presence of gross errors are determined by statistical tests on the constraints and measurements. The accuracy of the rectified data is strongly dependent on the accuracy and completeness of the available models, which should capture information such as the life-cycle network, stream compositions, and reactions. Such models are often not provided in LCI databases, so the proposed approach tackles many new challenges that are not encountered in process data rectification. An iterative approach is developed that relies on increasingly detailed information about the life-cycle processes from the user. A comprehensive application of the method to the chlor-alkali inventory being compiled by the National Renewable Energy Laboratory demonstrates the benefits and challenges of this approach.     

BnaC.Tic40, a plastid inner membrane translocon originating from Brassica oleracea, is essential for tapetal function and microspore development in Brassica napus

Here, we describe the characteristics of a Brassica napus male sterile mutant 7365A with loss of the BnMs3 gene, which exhibits abnormal enlargement of the tapetal cells during meiosis. Later in development, the absence of the BnMs3 gene in the mutant results in a loss of the secretory function of the tapetum, as suggested by abortive callose dissolution and retarded tapetal degradation. The BnaC.Tic40 gene (equivalent to BnMs3) was isolated by a map-based cloning approach and was confirmed by genetic complementation. Sequence analyses suggested that BnaC.Tic40 originated from BolC.Tic40 on the Brassica oleracea linkage group C9, whereas its allele Bnms3 was derived from BraA.Tic40 on the Brassica rapa linkage group A10. The BnaC.Tic40 gene is highly expressed in the tapetum and encodes a putative plastid inner envelope membrane translocon, Tic40, which is localized into the chloroplast. Transmission electron microscopy (TEM) and lipid staining analyses suggested that BnaC.Tic40 is a key factor in controlling lipid accumulation in the tapetal plastids. These data indicate that BnaC.Tic40 participates in specific protein translocation across the inner envelope membrane in the tapetal plastid, which is required for tapetal development and function.     

EP300 contributes to high-altitude adaptation in Tibetans by regulating nitric oxide production

The genetic adaptation of Tibetans to high altitude hypoxia likely involves a group of genes in the hypoxic pathway,as suggested by earlier studies.To test the adaptive role of the previously reported candidate gene EP300 (histone acetyltransferase p300),we conducted resequencing of a 108.9 kb gene region of EP300 in 80 unrelated Tibetans.The allele-frequency and haplotype-based neutrality tests detected signals of positive Darwinian selection on EP300 in Tibetans,with a group of variants showing allelic divergence between Tibetans and lowland reference populations,including Han Chinese,Europeans,and Africans.Functional prediction suggested the involvement of multiple EP300 variants in gene expression regulation.More importantly,genetic association tests in 226 Tibetans indicated significant correlation of the adaptive EP300 variants with blood nitric oxide (NO) concentration.Collectively,we propose that EP300 harbors adaptive variants in Tibetans,which might contribute to high-altitude adaptation through regulating NO production.     

Statin Use and the Risk of Parkinson's Disease: An Updated Meta-Analysis

Introduction

In response to the ongoing debate over the relationship between the use of statins and the risk of Parkinson''s disease (PD), we performed a systematic review and meta-analysis of observational studies to examine their association.

Methods

We conducted a review of the literature using electronic databases supplemented by a manual search to identify potentially relevant case-control or cohort studies. Summary relative risk (RRs) and 95% confidence intervals (CIs) were calculated using a random-effects model. Sensitivity and subgroup analyses were also conducted.

Results

Eleven studies (five case-control and six cohort) with a total of 3,513,209 participants and 21,011 PD cases were included. Statin use was associated with a lower risk of PD, with a summary RR of 0.81 (95% CI 0.71–0.92). Sensitivity analysis demonstrated the robustness of results. Subgroup analyses showed that neither study design nor study region significantly influenced the effect estimates. However, subgroup studies adjusted for age or sex had a greater inverse association than did unadjusted analyses (age-adjusted RR 0.75, 95% CI 0.60–0.95; age-unadjusted RR 0.86, 95% CI 0.75–0.99 and sex-adjusted RR 0.76, 95% CI 0.59–0.98; sex-unadjusted RR 0.85, 95% CI 0.79–0.92).

Conclusions

Results of this systematic review suggest that statin use is associated with a reduced PD risk. However, randomized controlled trials and more observational studies should be performed before strong conclusions are drawn.     

Investigation of Resonance Modulation of a Single Rhombic Plasmonic Nanoparticle

Optical extinction resonant properties of the silver rhombic plasmonic nanoparticles in visible regime were investigated by means of finite difference time domain method algorithm-based computational numerical calculation. Considering aspect ratio (a/b) of the x- and y-axes of the rhombic particles, the polarization in different angles of the incident light, and the index of the surrounding medium, we studied the extinction properties of a single rhombus. The simulation results show that there is only one clear resonance peak in the visible regime, and the corresponding plasmon mode is a dipolar plasmon mode. Along the direction of the light polarization, with the increase of the aspect ratio (a/b), red shift of the resonant peak occurs and the extinction efficiency increases accordingly. With the polarization angle varying from 0° to 90°, the resonance peaks show a small blue shift and the corresponding extinction efficiency varies slightly consequently. The tailoring ability of the resonance frequency is shown to be improved due to a unique interaction of local geometry with surface charge distributions.     

Single Nanostructure Electrochemical Devices for Studying Electronic Properties and Structural Changes in Lithiated Si Nanowires

Nanostructured Si is a promising anode material for the next generation of Li‐ion batteries, but few studies have focused on the electrical properties of the Li‐Si alloy phase, which are important for determining power capabilities and ensuring sufficient electrical conduction in the electrode structure. Here, we demonstrate an electrochemical device framework suitable for testing the electrical properties of single Si nanowires (NWs) at different lithiation states and correlating these properties with structural changes via transmission electron microscopy (TEM). We find that single Si NWs usually exhibit Ohmic I–V response in the lithiated state, with conductivities two to three orders of magnitude higher than in the delithiated state. After a number of sequential lithiation/delithiation cycles, the single NWs show similar conductivity after each lithiation step but show large variations in conductivity in the delithiated state. Finally, devices with groups of NWs in physical contact were fabricated, and structural changes in the NWs were observed after lithiation to investigate how the electrical resistance of NW junctions and the NWs themselves affect the lithiation behavior. The results suggest that electrical resistance of NW junctions can limit lithiation. Overall, this study shows the importance of investigating the electronic properties of individual components of a battery electrode (single nanostructures in this case) along with studying the nature of interactions within a collection of these component structures.     

A Durable Alternative for Proton‐Exchange Membranes: Sulfonated Poly(Benzoxazole Thioether Sulfone)s

To develop a durable proton‐exchange membrane (PEM) for fuel‐cell applications, a series of sulfonated poly(benzoxazole thioether sulfone)s ( SPTESBOs) are designed and synthesized, with anticipated good dimensional stability (via acid–base cross linking), improved oxidative stability against free radicals (via incorporation of thioether groups), and enhanced inherent stability (via elimination of unstable end groups) of the backbone. The structures and the degree of sulfonation of the copolymers are characterized using Fourier‐transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy (¹H NMR and ¹⁹F NMR). The electrochemical stabilities of the monomers are examined using cyclic voltammetry in a typical three‐electrode cell configuration. The physicochemical properties of the membranes vital to fuel‐cell performance are also carefully evaluated under conditions relevant to fuel‐cell operation, including chemical and thermal stability, proton conductivity, solubility in different solvents, water uptake, and swelling ratio. The new membranes exhibit low dimensional change at 25°C to 90°C and excellent thermal stability up to 250°C. Upon elimination of unstable end groups, the co‐polymers display enhanced chemical resistance and oxidative stability in Fenton's test. Further, the SPTESBO‐HFB‐60 (HFB‐60=hexafluorobenzene, 60 mol% sulfone) membrane displays comparable fuel‐cell performance to that of an NRE 212 membrane at 80°C under fully humidified condition, suggesting that the new membranes have the potential to be more durable but less expensive for fuel‐cell applications.     

炭疽芽胞杆菌(Bacillus anthracis)检测质粒的构建及其应用

根据炭疽芽胞杆菌(Bacillus anthracis)毒性质粒pX01和pX02上的2个毒力相关基因cya和capA的序列特点,以pIJ2925为出发载体,采用一步重叠延伸PCR技术(One-step Overlap Extension PCR,简称OOE-PCR)构建了包含cya基因和capA基因保守区DNA片段的炭疽检测质粒pBIB2006。采用复合PCR对模拟炭疽危险品进行分析,结果表明pBIB2006可以为炭疽芽胞杆菌的检测提供准确、安全和方便的阳性参照品,从而为检测炭疽芽胞杆菌和炭疽芽胞杆菌灭活疫苗提供了便利。