Common Metal-Dielectric-Metal Nanocavities for Multispectral Narrowband Light Absorption

We present a method to theoretically achieve multispectral narrowband light absorption in common metal-dielectric-metal nanocavities. Polarization-independent and wide-angle multi-band light absorption with absorbance up to 99 % is achieved owing to the excitation of multiple localized plasmon cavity modes. Strong interactions between plasmon resonances and photonic modes are further introduced for achieving sharp absorption spectrum with sub-10-nm bandwidth via a high-index dielectric spacer with a thickness exceeding λ/2. These findings can offer new perspectives for multispectral nano-optics devices including perfect light absorbers and subtractive polychromatic filters.     

Heat Treatment and β-Carotene Incorporation Effect in the Interaction of β-Lactoglobulin and Carboxymethylcellulose System

Encapsulation technologies using proteins or polysaccharides can be employed with the purpose of solubilizing and protecting carotenoids. However, information on the role of protein and polysaccharide interactions is still slightly limited. The aim of this work was to investigate the effect of β-carotene linked to protein β-lactoglobulin (BLG) in the interaction carboxymethylcellulose (CMC) using isothermal titration calorimetry (ITC). Firstly, BLG and CMC interaction was assessed by means of turbidity analysis. Based on the results of turbidity, the thermodynamic profile of BLG-CMC complexes at pH 4.0 was obtained using ITC analysis at 25 °C. Afterward, it was evaluated the effect of a thermal treatment applied to the BLG (68 °C for 50 min) in the interaction with CMC also using ITC and circular dichroism (CD). ITC and CD analysis showed that the heat treatment applied on BLG did not cause changes in molecular interactions. The binding isotherm of BLG-CMC complexes incorporated with β-carotene showed an increase in the molar ratio and a slight decrease in enthalpy of the system. Incorporation of β-carotene in the system did not significantly affect the BLG and CMC interaction, suggesting this system can be applied in food application as encapsulation.     

Flow Behavior of Native Corn and Potato Starch Granules in Aqueous Suspensions

The flow behavior of native corn and potato starch granule suspensions prepared in a concentrated sucrose solution has been investigated. Measurements were performed using a rotational rheometer with a concentric cylinder geometry. Starch suspensions were dilute to semi-concentrated (1 % to 25 % by volume). Shear and dynamic viscosity were measured by shear flow and dynamic oscillatory testing at 20, 50 and 80 °C. The starch suspensions exhibited essentially Newtonian behavior at all solid contents, although at higher solid volume fractions there was evidence of slight shear thickening. The relative viscosity of suspensions increased with increasing starch granule content, and the data conformed well to Maron-Pierce’s equation. An increase in maximum packing fraction and gravitational depletion of the starch granules with increasing temperature resulted in lower relative viscosities at higher temperatures. Also, the relative viscosities of potato starch granule suspensions with bigger, more oval and anisometric particles were lower than those of corn starch suspensions where granules were closer to sphericity but were angular in shape. Oscillatory shear testing results showed the presence of viscoelastic properties at intermediate solid volume fractions at low frequencies; in addition, the relative shear viscosity was higher than the relative dynamic viscosity, probably due to the formation of shear-induced structures during the shear flow test.     

Optical Response of Plasmonic Nanohole Arrays: Comparison of Square and Hexagonal Lattices

Nanohole arrays in metal films allow extraordinary optical transmission (EOT); the phenomenon is highly advantageous for biosensing applications. In this article, we theoretically investigate the performance of refractive index sensors, utilizing square and hexagonal arrays of nanoholes, that can monitor the spectral position of EOT signals. We present near- and far-field characteristics of the aperture arrays and investigate the influence of geometrical device parameters in detail. We numerically compare the refractive index sensitivities of the two lattice geometries and show that the hexagonal array supports larger figure-of-merit values due to its sharper EOT response. Furthermore, the presence of a thin dielectric film that covers the gold surface and mimics a biomolecular layer causes larger spectral shifts within the EOT resonance for the hexagonal array. We also investigate the dependence of the transmission responses on hole radius and demonstrate that hexagonal lattice is highly promising for applications demanding strong light transmission.     

Broad Tunable Nanoantenna Based on Graphene Log-Periodic Toothed Structure

A log-periodic toothed nanoantenna based on graphene is proposed, and its multi-resonance properties with respect to the variations of the chemical potential are investigated. The field enhancement and radar cross-section of the antenna for different chemical potentials are calculated, and the effect of the chemical potential on the resonance frequency is analyzed. In addition, the dependence of the resonance frequency on the substrate is also discussed. It is shown that large modulation of resonance intensity in log-periodic toothed nanoantenna can be achieved via turning the chemical potential of graphene. The tunability of the resonant frequencies of the antenna can be used to broad tuning of spectral features. The property of tunable multi-resonant field enhancement has great prospect in the field of graphene-based broadband nanoantenna, which can be applied in non-linear spectroscopy, optical sensor, and near-field optical microscopy.     

Large-Area,Low-Cost Infrared Metamaterial Fabrication Via Pulsed Laser Deposition with Metallic Mesh as a Shadow Mask

Metamaterials are artificial periodic structures with negative permittivity and permeability. Several interesting properties can be obtained in metamaterials, such as negative index behavior, which can be used for building perfect lenses, cloaking, antennas, etc. As the metamaterial’s properties are determined by its structure, the key challenge is to reduce the fabrication cost of the periodic structure on the micrometer or nanometer scale for realistic applications. In this paper, we experimentally demonstrate a new one-step method for the fabrication of a large-area infrared metamaterial at extremely low cost. A metallic mesh is used as a shadow mask during the pulsed laser deposition (PLD) process to fabricate a FeNi/SiC/FeNi multilayer sandwich structure on Si substrate (cm² level). The sample shows a strong absorption peak in the infrared frequency range, and the absorption intensity changes with the sample’s geometry.     

Tunnel Light Through a Continuous Optically Thick Metal Film Utilizing Higher Order Magnetic Plasmon Resonance

In this letter, we investigate the extraordinary optical transmission behavior of a flat continuous metal film sandwiched by magnetic plasmonic structures. A new mechanism by utilizing higher order magnetic plasmon resonance is proposed to enhance the transmission. Numerical simulation results show that 80 % electromagnetic energy can be transmitted through the middle 50-nm-thick continuous gold film in near-infrared regime. The excitation of the second-order magnetic plasmons and the propagating surface plasmons, as well as the interaction between them accounts for such a high transmission. The interaction of magnetic plasmons and surface plasmons leads to new hybrid modes, and the coupled oscillator model is introduced to analyze this hybridization. This work extends the application range of higher order magnetic plasmons and may have potential in transparent electrode and electromagnetic energy transfer applications.     

Numerical Simulation of Broadband Scattering by Coated and Noncoated Metal Nanostructures Using Discrete Dipole Approximation Method

We suggest numerical method to study the optical response of metal nanostructures. The analysis of optical properties such as scattering and absorption by coated and noncoated nanogeometry has been done using discrete dipole approximation (DDA) method. The core-shell nanogeometry supports surface plasmon resonances, which are highly tunable from 400 to 1100 nm. The tunability of surface plasmon resonance (SPR) highly depends on the structural anisotropy and chosen core-shell material. Further, we have observed that aspect ratio is one of the key parameter to decide the nature and position of the plasmonic peaks and magnitude of optical cross section. We have also shown that coated nanospheroid is a more appropriate geometry as compared to coated nanosphere and noncoated nanospheroid in terms of wide tunability of surface plasmon resonance. The wide tunability in SPR is observed for the effective radii 90 nm core-shell (Au@SiO₂) nanospheroid with aspect ratio 0.1.     

Ultrabroadband Mid-infrared Light Absorption Based on a Multi-cavity Plasmonic Metamaterial Array

We present a broadband plasmonic metamaterial absorber in the infrared region based on localized surface plasmon polaritons (LSPPs). The unit cell of the proposed metamaterial absorber consists of a multi-cavity structure, in which absorption resonances can be tuned independently through the modification of the width and shift of metallic walls. In order to avoid the degeneration between two contiguous resonances, which dramatically reduces the bandwidth, we introduce a zigzag design rule to arrange the cavities within a compact unit. Thus, the possible number of resonances is greatly increased, enabling an ultrabroadband absorption. A broadband absorber is demonstrated with only a few-layer structure and it also has an incident-angle-insensitive feature. Our results have potential applications in photovoltaic devices, emitters, sensors, and camouflage systems.     

Effect of Water Content on the Glass Transition Temperature of Calcium Maltobionate and its Application to the Characterization of Non-Arrhenius Viscosity Behavior

To understand the fundamental physical properties of calcium maltobionate (MBCa), its water sorption isotherm, glass transition temperature (T _g), and viscosity (η) were investigated and compared with those of maltobionic acid (MBH) and maltose. Although amorphous maltose crystalized at water activity (a _w) higher than 0.43, MBCa and MBH maintained an amorphous state over the whole a _w range. In addition, MBCa had a higher T _g and greater resistance to water plasticizing than MBH and maltose. These properties of MBCa likely originate from the strong interaction between MBCa and water induced by electrostatic interactions. Moreover, the effects of temperature and water content on η of an aqueous MBCa solution were evaluated, and its behavior was described using a semi-empirical approach based on a combination of T _g extrapolated by the Gordon-Taylor equation and a non-Arrhenius formula known as the Vogel–Fulcher–Tammann equation. This result will be useful for understating the effect of MBCa addition on the solution’s properties.