Structure Elucidation of Two New Norlignans from Anemone vitifolia and Their Anti‐Inflammatory Activities

Two new norlignans together with two known phenylpropanoids were isolated from the whole herb of Anemone vitifolia. All compounds were reported from this plant for the first time. The structures of these compounds were identified by comprehensive HR‐ESI‐MS, 1D and 2D NMR spectroscopic data analysis and comparison with literature data. Additionally, bioactivity study results showed that two new compounds have potential anti‐inflammatory activity. The plausible biosynthetic pathway for these compounds were also speculated in this article.     

Protective Antioxidant Effects of Amentoflavone and Total Flavonoids from Hedyotis diffusa on H2O2‐Induced HL‐O2 Cells through ASK1/p38 MAPK Pathway

In this study, total flavonoids and total triterpenoid acid were extracted with ethyl acetate from Hedyotis diffusa Willd, and hepatoprotective activities of them and five compounds from total flavonoids against H₂O₂ induced hepatocyte damage on HL‐02 cells were determined. In particular, amentoflavone and total flavonoids had influence on the leakage of ALT, AST, LDH, the activities of SOD and the content of MDA. They effectively reduced the loss of MMP, the release of Cyt C, and then inhibited activation of caspase‐3/caspase‐9 cascade in hepatotoxic cells. The contents of ROS were significantly reduced to inhibit p38 in amentoflavone and flavonoids groups which decreased ASK1 and p‐p38 levels through increasing thioredoxin Trx1 and reductase TrxR1. These results suggesting that the antioxidant protection of amentoflavone and flavonoids might be reducing ROS to inhibit the H₂O₂‐induced upstream of pathway via increasing levels of Trx1 and TrxR1, which were pivotal in blocking the down streaming effectors of ASK1/p38 MAPK pathway and alleviating hepatotoxicity.     

High‐Efficiency CsPbI2Br Perovskite Solar Cells with Dopant‐Free Poly(3‐hexylthiophene) Hole Transporting Layers

CsPbI₂Br is emerging as a promising all‐inorganic material for perovskite solar cells (PSCs) due to its more stable lattice structure and moisture resistance compared to CsPbI₃, although its device performance is still much behind this counterpart. Herein, a preannealing process is developed and systematically investigated to achieve high‐quality CsPbI₂Br films by regulating the nucleation and crystallization of perovskite. The preannealing temperature and time are specifically optimized for a dopant‐free poly(3‐hexylthiophene) (P3HT)‐based device to target dopant‐induced drastic performance degradation for spiro‐OMeTAD‐based devices. The resulting P3HT‐based device exhibits comparable power conversion efficiency (PCE) to spiro‐OMeTAD‐based devices but much enhanced ambient stability with over 95% PCE after 1300 h. A diphenylamine derivative is introduced as a buffer layer to improve the energy‐level mismatch between CsPbI₂Br and P3HT. A record‐high PCE of 15.50% for dopant‐free P3HT‐based CsPbI₂Br PSCs is achieved by alleviating the open‐circuit voltage loss with the buffer layer. These results demonstrate that the preannealing processing together with a suitable buffer layer are applicable strategies for developing dopant‐free P3HT PSCs with high efficiency and stability.     

Accurate Control Multiple Active Sites of Carbonaceous Anode for High Performance Sodium Storage: Insights into Capacitive Contribution Mechanism

Heteroatom doping is widely recognized as an appealing strategy to break the capacitance limitation of carbonaceous materials toward sodium storage. However, the concrete effects, especially for heteroatomic phase transformation, during the sodium storage reaction remain a confusing topic. Here, a novel hypercrosslinked polymerization approach is demonstrated to fabricate pyrrole/thiophene hypercrosslinked microporous copolymer and further give porous carbonaceous materials with accurately regulated N/S dual doping corresponding to starting feeding ratios. Significantly, the N doping contributes to the conductivity and surface wettability, while the S doping is bridged to build stable active sites, which can be electrochemically converted into mercaptan anions via faraday reaction and further enhancing reversible capacities. Meanwhile, the abundant S doping can also conduce to the expanded interlayer spacing to shorten the ions diffusion distance, thus optimizing the reaction kinetic. As a result, the N_0.2S_0.8‐micro‐dominant porous carbon delivers the highest reversible capacity of 521 mAh g^?1 at 100 mA g^?1 and excellent cyclic stability over 2000 cycles at 2000 mA g^?1 with a capacity decay of 0.0145 mAh g^?1 per cycle. This work is anticipated to provide an in‐depth understanding of capacitance contribution and illuminate the heteroatomic phase transformation during sodium storage reactions for doping carbonaceous anodes.     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

2D Metal Zn Nanostructure Electrodes for High‐Performance Zn Ion Supercapacitors

Recent supercapacitors show a high power density with long‐term cycle life time in energy‐powering applications. A supercapacitor based on a single metal electrode accompanying multivalent cations, multiple charging/discharging kinetics, and high electrical conductivity is a promising energy‐storing system that replaces conventionally used oxide and sulfide materials. Here, a hierarchically nanostructured 2D‐Zn metal electrode‐ion supercapacitor (ZIC) is reported which significantly enhances the ion diffusion ability and overall energy storage performance. Those nanostructures can also be successfully plated on various flat‐type and fiber‐type current collectors by a controlled electroplating method. The ZIC exhibits excellent pseudocapacitive performance with a high energy density of 208 W h kg^?1 and a power density from 500 W kg^?1, which are significantly higher than those of previously reported supercapacitors with oxide and sulfide materials. Furthermore, the fiber‐type ZIC also shows high energy‐storing performance, outstanding mechanical flexibility, and waterproof characteristics, without any significant capacitance degradation during bending tests. These results highlight the promising possibility of nanostructured 2D Zn metal electrodes with the controlled electroplating method for future energy storage applications.     

Nonwoven rGO Fiber‐Aramid Separator for High‐Speed Charging and Discharging of Li Metal Anode

Li metal, which has a high theoretical specific capacity and low redox potential, is considered to the most promising anode material for next‐generation Li ion‐based batteries. However, it also exhibits a disadvantageous solid electrolyte interphase (SEI) layer problem that needs to be resolved. Herein, an advanced separator composed of reduced graphene oxide fiber attached to aramid paper (rGOF‐A) is introduced. When rGOF‐A is applied, F^? anions, generated from the decomposition of the LiPF₆ electrolyte during the SEI layer formation process form semi‐ionic C? F bonds along the surface of rGOF. As Li⁺ ions are plated, the “F‐doped” rGO surface induces the formation of LiF, which is known as a component of a chemically stable SEI, therefore it helps the Li metal anode to operate stably at a high current of 20 mA cm^?2 with a high capacity of 20 mAh cm^?2. The proposed rGOF‐A separator successfully achieves a stable SEI layer that could resolve the interfacial issues of the Li metal anode.     

Rational Design of Nanocatalysts with Nonmetal Species Modification for Electrochemical CO2 Reduction

Converting CO₂ to valuable carbonaceous fuels and chemicals via electrochemical CO₂ reduction by using renewable energy sources is considered to be a scalable strategy with substantial environmental and economic benefits. One of the challenges in this field is to develop nanocatalysts with superior electrocatalytic activity and selectivity for targeted products. Nonmetal species modification of nanocatalysts is of great significance for the construction of distinctive active sites to overcome the kinetic limitations of CO₂ reduction. These types of modification enable the efficient control of the selectivity and significantly decrease the reaction overpotential. Herein, a comprehensive review of the recent progress of nonmetal species modification of nanocatalysts for electrochemical CO₂ reduction is presented. After discussing some fundamental parameters and the basic principles of CO₂ reduction, including possible reaction pathways in light of theoretical modeling and experiments, the identification of active sites and elucidation of reaction mechanisms are emphasized for unraveling the role of nonmetal species modification, such as heteroatom incorporation, organic molecule decoration, electrolyte engineering, and single‐atom engineering. In the final section, future challenges and constructive perspectives are provided, facilitating the accelerated advancement of mechanism research and practical applications of green carbon cycling.     

Industrial attributes of β-glucanase produced by Bacillus sp. CSB55 and its potential application as bio-industrial catalyst

Bioprocess and Biosystems Engineering - The β-glucanase produced from Bacillus sp. CSB55 not only depicts the potent industrial characteristics but also relates as bio-industrial catalyst...