Biotic and Abiotic Drivers of Peatland Growth and Microtopography: A Model Demonstration

Peatlands are important carbon reserves in terrestrial ecosystems. The microtopography of a peatland area has a strong influence on its carbon balance, determining carbon fluxes at a range of spatial scales. These patterned surfaces are very sensitive to changing climatic conditions. There are open research questions concerning the stability, behaviour and transformation of these microstructures, and the implications of these changes for the long-term accumulation of organic matter in peatlands. A simple two-dimensional peat microtopographical model was developed, which accounts for the effects of microtopographical variations and a dynamic water table on competitive interactions between peat-forming plants. In a case study of a subarctic mire in northern Sweden, we examined the consequences of such interactions on peat accumulation patterns and the transformation of microtopographical structure. The simulations demonstrate plausible interactions between peatland growth, water table position and microtopography, consistent with many observational studies, including an observed peat age profile from the study area. Our model also suggests that peatlands could exhibit alternative compositional and structural dynamics depending on the initial topographical and climatic conditions, and plant characteristics. Our model approach represents a step towards improved representation of peatland vegetation dynamics and net carbon balance in Earth system models, allowing their potentially important implications for regional and global carbon balances and biogeochemical and biophysical feedbacks to the atmosphere to be explored and quantified.     

Variability in the settlement of non-indigenous species in benthic communities from an oceanic island

The introduction of non-indigenous species (NIS) in new environments represents a major threat for coastal ecosystems. A good understanding of the mechanisms and magnitude of the impact of NIS colonisation on native ecosystems is becoming increasingly crucial to develop mitigation measures and prevent new invasions. In this present study, we asked if distinct coastal benthic communities from an oceanic island can have different vulnerability to NIS colonisation process. First, PVC settlement plates were deployed for 1 year on the rocky shore of two different locations of Madeira Island (North versus South coast). Then, we implemented a mesocosm experiment where recruited plate communities were maintained under different levels of NIS propagule pressure in order to assess their vulnerability to NIS colonisation process. Results showed that NIS colonisation success was not influenced by the level of propagule pressure, but however, final colonisation patterns varied depending on the origin of the communities. This variability can be attributed to major structural differences between the preponderant species of each community and therefore to the biotic substrate they offer to colonisers. This study highlights how biotic features can alter the NIS colonisation process and importantly, shows that in an urbanisation context, the nature of the resident communities facing invasions risks needs to be closely assessed.     

Bottom-up approaches in synthetic biology and biomaterials for tissue engineering applications

Synthetic biologists use engineering principles to design and construct genetic circuits for programming cells with novel functions. A bottom-up approach is commonly used to design and construct genetic circuits by piecing together functional modules that are capable of reprogramming cells with novel behavior. While genetic circuits control cell operations through the tight regulation of gene expression, a diverse array of environmental factors within the extracellular space also has a significant impact on cell behavior. This extracellular space offers an addition route for synthetic biologists to apply their engineering principles to program cell-responsive modules within the extracellular space using biomaterials. In this review, we discuss how taking a bottom-up approach to build genetic circuits using DNA modules can be applied to biomaterials for controlling cell behavior from the extracellular milieu. We suggest that, by collectively controlling intrinsic and extrinsic signals in synthetic biology and biomaterials, tissue engineering outcomes can be improved.     

Iron metabolism in diabetes-induced Alzheimer’s disease: a focus on insulin resistance in the brain

Alzheimer’s disease (AD) is characterized by an excessive accumulation of toxic amyloid beta (Aβ) plaques and memory dysfunction. The onset of AD is influenced by age, genetic background, and impaired glucose metabolism in the brain. Several studies have demonstrated that diabetes involving insulin resistance and glucose tolerance could lead to AD, ultimately resulting in cognitive dysfunction. Even though the relationship between diabetes and AD was indicated by significant evidences, the critical mechanisms and metabolic alterations in diabetes induced AD are not clear until now. Recently, iron metabolism has been shown to play multiple roles in the central nervous system (CNS). Iron deficiency and overload are associated with neurodegenerative diseases. Iron binds to Aβ and subsequently regulates Aβ toxicity in the CNS. In addition, previous studies have shown that iron is involved in the aggravation of insulin resistance. Considering these effects of iron metabolism in CNS, we expect that iron metabolism may play crucial roles in diabetic AD brain. Thus, we review the recent evidence regarding the relationship between diabetes-induced AD and iron metabolism.     

Effect of cement industry flue gas simulation on the physiology and photosynthetic performance of <Emphasis Type="Italic">Chlorella sorokiniana</Emphasis>

Cement plants account for significant emissions of CO₂ and other pollutants into the atmosphere. As a means for its mitigation, we tested the effect of a cement industry-based flue gas simulation (FGS — 18% CO₂, 9% O₂, 300 ppm NO₂, 140 ppm SO₂) on the green alga, Chlorella sorokiniana. Culture pH, cell density, cell viability and productivity, specific growth rates, photosynthetic performance, and biochemical composition were monitored. The treatments consisted of different FGS volumes (0.1, 0.3, 0.8, 1.5, 6, and 48 L day^?1) that were applied in a series of laboratory-scale semi-continuous batch cultures under controlled conditions. Controls were exposed to 18% CO₂ enriched air. Cell density showed that C. sorokiniana was able to grow in all treatments, but compared to the controls, low pH (~ 5.0) caused by 48 L FGS day^?1 led to 27% decrease in specific growth rate. Increasing FGS exposure decreased maximum and operational quantum yields obtained by pulse amplitude modulated fluorometry, while photochemical quenching remained constant (~ 0.93). The α and rETR _max parameters calculated from rapid light curves decreased with increasing FGS exposure. Total proteins and carbohydrates (per cell basis) increased after 6 and 48 L FGS day^?1, which can be advantageous for biotechnological applications, but cell productivity (cells L^?1 day^?1) decreased. Despite the effects in physiology, C. sorokiniana could withstand a pH range of 6.0–5.0 imposed by 48 L FGS day^?1. Overall, C. sorokiniana can be considered a robust species in flue gas bioremediation.     

Enhanced resistance to citrus canker in transgenic mandarin expressing Xa21 from rice

Genetic engineering approaches offer an alternative method to the conventional breeding of Citrus sp. ‘W. Murcott’ mandarin (a hybrid of ‘Murcott’ and an unknown pollen parent) is one of the most commercially important cultivars grown in many regions around the world. Transformation of ‘W. Murcott’ mandarin was achieved by direct DNA uptake using a protoplast transformation system. DNA construct (pAO3), encoding Green Fluorescent Protein (GFP) and the cDNA of Xa21, a Xanthomonas resistance gene from rice, was used to transform protoplasts of ‘W. Murcott’ mandarin. Following citrus protoplast culture and regeneration, transformed micro calli were microscopically designated via GFP expression, physically isolated from non-transformed tissue, and cultured on somatic embryogenesis induction medium. More than 150 transgenic embryos were recovered and from them, ten transgenic lines were regenerated and cultured on rooting medium for shoot elongation. Transgenic shoots were micrografted and established in the greenhouse with 3–5 replicates per line. The insertion of Xa21 and GFP was confirmed by PCR and southern blot analysis. GFP expression was verified by fluorescence microscopy and western blot analysis revealed expression of Xa21 although it was variable among transgenic lines, as shown by RT-qPCR. Transgenic plants challenged with the citrus canker pathogen by syringe inoculation showed a reduction in lesion number and bacterial populations within lesions compared to non-transgenic control plants. Transgenic ‘W. Murcott’ mandarin lines with improved canker resistance via protoplast transformation from embryogenic callus with the Xa21 gene from rice are being evaluated under field conditions to validate the level of resistance.     

Molecular characterization of <Emphasis Type="Italic">bmyC</Emphasis> gene of the mosquito pupicidal bacteria, <Emphasis Type="Italic">Bacillus amyloliquefaciens</Emphasis> (VCRC B483) and in silico analysis of bacillomycin D synthetase C protein

A strain of Bacillus amyloliquefaciens (VCRC B483) exhibiting mosquito pupicidal, keratinase and antimicrobial activities was isolated from mangrove forest ecosystem of Andaman and Nicobar Islands. Molecular characterization of the strain showed the presence of lipopeptide encoding bmyC gene. Phylogenetic tree based on protein sequence of this gene exhibited homology with mycosubtilin synthetase of Bacilus atropheus and Iturin synthetase of Bacillus subtilis and B. amyloliquefaciens. This is the first report on the evolutionary conservation of amino acids concerned with the function and structure of bmyC protein of B. amyloliquefaciens. The presence of valine at the 1197th position in our strain was found to be unique and different from the existing strains of B. subtilis and B. amyloliquefaciens. Molecular modelling studies revealed significant changes in the structure of epimerization domain of the bmyC protein with A1197V variation. Crude metabolite of this strain exhibited antifungal activity against Fusarium sp. and Carvularia sp.     

Short-term in vitro culture of purity and highly functional rat bone marrow-derived mast cells

Mast cells (MCs) are responsible for the innate immune response. Rat MCs are more suitable than mouse MCs as models of specific parasite infection processes and ovalbumin-induced asthma. Rat peritoneum-derived MCs and RBL-2H3 cells (an MC cell line) are widely used in disease studies. However, the application of rat bone marrow-derived MCs (BMMCs) are poorly documented in terms of the methodology of rat BMMC isolation. Here, we describe a relatively rapid, efficient, and simple method for the cultivation of rat BMMCs. As compared to previous protocols, rat BMMCs produced with the proposed protocol exhibited advantages in differentiation, proliferation, lifespan, and functionality, which should prove useful for studies of mucosal MC diseases in specific rat models.