稻田蜘蛛混合种群空间分布模式动态分析(英文)

结果表明,在东方红农场稻田中总共有11科29属43种蜘蛛,其中早稻田中有8科19属43种,晚稻田中有10科27属36种。在水稻的不同发育阶段蜘蛛混合种群的空间分布模式存在差异。在早稻发育的前期、中期和后期,稻田蜘蛛混合种群的空间分布模式分别是聚集的、随机的和聚集的;在晚稻发育的前期、中期和后期,其空间分布模式依次是均匀的、聚集的和均匀的。同时,对其空间分布模式动态进行了初步分析。     

不同植物群落下酸化尾矿养分状况及土壤酶活性

调查不同植被群落下铜尾矿的养分状况及土壤酶活性的变化动态,通过常规方法测定了尾矿的pH和电导率,以及有机质,总氮,有效磷,速效钾的含量。用底物反应法测定了过氧化氢酶,芳基硫酯酶,脲酶,酸性磷酸化酶和脱氢酶的活性。结果表明,与酸化的裸露尾矿相比,定居其上的芦苇(Phragmites australis)、狗牙根(Cynodon dactylon)和双穗雀稗(Paspalum distichum)均能显著增加尾矿基质pH值(从3.6上升到5.4),降低电导率,减缓尾矿酸化过程。芦苇和狗牙根能够显著提高尾矿基质中N、K和有机质含量(P<0.05),增加尾矿中的养分。3种植物群落下有效磷较裸露尾矿没有显著增加。植物的定居显著提高了尾矿中过氧化氢酶、芳基硫脂酶和脲酶的活性(P<0.05);但酸性磷酸化酶和脱氢酶活性没有显著提高。研究表明,植物对尾矿有明显的改良作用,而且芦苇和狗牙根优于双穗雀稗。在各种植被条件的尾矿中除酸性磷酸化酶以外的其它实验土壤酶活性均与尾矿中有机质和总氮呈极显著正相关(P<0.01)。     

Quorum Sensing System Used as a Tool in Metabolic Engineering

Quorum sensing (QS) is a ubiquitous cell–cell communication mechanism in microbes that coordinates population‐level cell behaviors, such as biofilm production, virulence, swarming motility, and bacterial persistence. Efforts to engineer QS systems to take part in metabolic network regulation represent a promising strategy for synthetic biology and pathway engineering. Recently, design, construction, and implementation of QS circuits for programmed control of bacterial phenotypes and metabolic pathways have gained much attention, but have not been reviewed recently. In this article, the architectural organizations and genetic contributions of the naturally occurring QS components to understand the mechanisms are summarized. Then, the most recent progress in application of QS toolkits to develop synthetic networks for novel cell behaviors creation and metabolic pathway engineering is highlighted. The current challenges in large‐scale application of these QS circuits in synthetic biology and metabolic engineering fields are discussed and future perspectives for further engineering efforts are provided.     

HCV E2蛋白诱导的体液免疫及CTL应答研究

应用PCR方法扩增出HCVE2基因编码417a．a-750a．a的DNA片段,克隆到原核表达载体pQE30 LacZ启动子下游,转化JM109菌株。在JM109菌株中诱导表达出N端含6个组氨酸的E2融合蛋白,用Ni-NTA-Superflow亲和层析柱纯化作为抗原免疫实验兔和BALB／c鼠。定期取兔血,采用间接ELISA方法检测兔子体内针对E2的抗体水平和维持规律。结果显示,距初次免疫14d兔子体内已有抗体产生,直至免疫第55d抗体水平持续上升,之后抗体水平保持稳定,抗体滴度达到1：3200。六周后,取鼠脾脏制各淋巴细胞,定向刺激扩增后与经过重组真核表达质粒pCE2转染的P815细胞作用,利用LDH释放试验检测作用效果。在E：T＝200：1的情况下,杀伤率超过30％。这些结果表明工程菌株表达的HCVE2蛋白具有良好的免疫原性,可以诱发免疫实验动物机体产生较高滴度的抗体及特异性CTL应答。由此我们认为E2蛋白是发展HCV预防工程蛋白疫苗的合适候选者。     

醋酸纤维素膜为基础的葡萄糖生物传感器的研制

用共价法将酶固定在醋酸纤维素膜上,方法简便易行,制造的酶膜稳定,比活力高。同时采用该方法制备了葡萄糖氧化酶酶膜,与氧电极组装成测定葡萄糖的生物传感器,线性范围为50~800mg／dl,仪器工作的最适pH为6．0,最适温度为40℃。将该膜与过氧化氢电极组装得到的传感器具有以下特性：线性范围为10~200mg／dl,最适pH为6．0,测定结果与酶试制盒有良好相关性。     

超嗜热酯酶EST2在不同宿主中的异源高效表达研究

来源于超嗜热古菌Alicyclobacillus acidocaldarius的酯酶EST2是目前报道的活性最高的超嗜热酯酶,具有极大的工业应用价值。为促进EST2的生产应用,将其分别在大肠杆菌及毕赤酵母中进行异源表达,并就不同宿主对表达情况和重组酶酶学性质的影响进行了分析。在大肠杆菌和毕赤酵母中重组表达的EST2酶学性质基本一致:最适温度分别为75℃和77.5℃,最适pH均为8.0,比活力分别为4656.6 U/mg和4078.3 U/mg,70℃水浴保温4.5 h,残余活力均在70%以上。在摇瓶发酵的基础上,于5 L发酵罐中进行了重组大肠杆菌及毕赤酵母的高密度发酵。毕赤酵母高密度发酵120 h菌体干重达68 g/L,最大表达酶活力为959.6 U/ml。大肠杆菌高密度发酵25 h菌体干重达60.8 g/L,最大酶活力14825.6 U/ml,表达量是毕赤酵母的15.4倍,单位时间产量是酵母的74.2倍。结果表明大肠杆菌发酵周期短、表达量高,更适合进行嗜热酯酶EST2的高效生产,这为促进嗜热酯酶在工业生物技术产业的应用奠定了基础。     

Production and Accumulation of Xylooligosaccharides with Long Chains by Growing Culture and Xylanase of a Mutant Strain of Bacillus pumilus X-6-19

Bacillus pumilus X-6-9 isolated from soil and subsequently identified, produced xylooligosacchatides with long chainsfrom xylan and accumulated them in the culture. By improving the culture conditions and mutating the bacterium, a 3.2-fold increasein the production of the xylooligosaccharides was established, when compared to the original culture conditions of B. pumilus X-6-19.The addition of D-glucose to the culture of the mutant swain U-3 of B. pumilus X-6-9 repressed the synthesis of β-xylosidase, but notxylanase. Thus, it was revealed that strain U-3 was a good organism for the production and accumulation of xylooligosaccharideswith long chains from xylan by a microbial culture. Xylanase produced by strain U-3 was purified to homogeneity and characterized.The hydrolyzates generated by the purified xylanase contained xylobiose, xylotrinse, xylotewaose, and xylopentaose, but not xylose.     

PNAS-4 expression and its relationship to p53 in colorectal cancer

PNAS-4 is a novel pro-apoptotic protein activated during the early response to DNA damage; however, the molecular mechanisms and pathways regulating PNAS-4 expression in tumors are not well understood. We hypothesized that PNAS-4 is a p53 down-stream target gene and designed this study. We searched online for putative p53-binding sites in the entire PNAS-4 gene and did not find any corresponding information. In HCT116 colon cancer cells, after being transfected with small interfering RNA to silence p53, the expressions of PNAS-4 and other known p53 target gene (Apaf1, Bax, Fas and Dr5) were determined by real-time PCR. We found that PNAS-4 was up-regulated while Apaf1, Bax, Fas and Dr5 were down-regulated. We then examined the expression of PNAS-4 and p53 mutation in colorectal cancer patients. PNAS-4 expressed both in colorectal cancers and normal tissues, but compared with paired control, PNAS-4 was up-regulated in cancers (P = 0.018). PNAS-4 overexpression ratios were correlated to the p53 mutant status (P = 0.001). The mean PNAS-4 expression levels of p53 mutant homozygote group and heterozygote group were higher than that of p53 wild type group (P = 0.013). The expression ratios of PNAS-4 (every sample in relative to its paired normal mucosa) were different between negative lymph node metastasis (66% up-regulated, 34% down-regulated) and positive metastasis (42% up-regulated, 58% down-regulated). Taken together, these findings suggested that PNAS-4 was not a p53 target, but overexpression of PNAS-4 was correlated to p53 inactivity in colorectal cancer.     

Processing and characterization of porous structures from chitosan and starch for tissue engineering scaffolds

Natural biodegradable polymers were processed by different techniques for the production of porous structures for tissue engineering scaffolds. Potato, corn, and sweet potato starches and chitosan, as well as blends of these, were characterized and used in the experiments. The techniques used to produce the porous structures included a novel solvent-exchange phase separation technique and the well-established thermally induced phase separation method. Characterization of the open pore structures was performed by measuring pore size distribution, density, and porosity of the samples. A wide range of pore structures ranging from 1 to 400 microm were obtained. The mechanisms of pore formation are discussed for starch and chitosan scaffolds. Pore morphology in starch scaffolds seemed to be determined by the initial freezing temperature/freezing rate, whereas in chitosan scaffolds the shape and size of pores may have been determined by the processing route used. The mechanical properties of the scaffolds were assessed by indentation tests, showing that the indentation collapse strength depends on the pore geometry and the material type. Bioactivity and degradation of the potential scaffolds were assessed by immersion in simulated body fluid.