Single protein production (SPP) system in Escherichia coli

Here, we provide a detailed protocol for the single protein production (SPP) system, which is designed to produce only a single protein of interest in living Escherichia coli cells. Induction of MazF, an mRNA interferase that cleaves RNA at ACA nucleotide sequences, results in complete cell growth arrest. However, if mRNA encoding a protein of interest is engineered to be devoid of ACA base triplets and is induced at 15 degrees C using pCold vectors in MazF-expressing cells, only the protein from this mRNA is produced at a yield of 20-30% of total cellular protein; other cellular protein synthesis is almost completely absent. In theory, any protein can be produced by the SPP system. Protein yields are typically unaffected even if the culture is condensed up to 40-fold, reducing the cost of protein production by up to 97.5%. The SPP system has a number of key features important for protein production, including high-yield and prolonged production of isotope-labeled protein at a very high signal-to-noise ratio. The procedure can be completed in 7 d after cloning of an ACA-less target gene into the expression system.     

Induction of 2-amino-D2-thiazoline-4-carboxylic acid hydrolase and N-carbamoyl-l-cysteine amidohydrolase by S-compounds in Pseudomonas putida AJ3865

The induction of 2-amino-Delta(2)-thiazoline-4-carboxylic acid hydrolase (ATCase) and N-carbamoylcysteine amidohydrolase (NCCase), both of which are involved in the conversion step of 2-amino-Delta(2)-thiazoline carboxylic acid (ATC) to cysteine, was studied with Pseudomonas putida AJ3865. We found that L-ATC induced L-ATCase and L-NCCase, but that D-ATC induced only L-NCCase, whereas L- or D-NCC and thiazoline derivatives did not induce both enzymes. The bacterium showed neither D-ATCase nor D-NCCase activities, indicating that the role of L-ATC and D-ATC was different in the enzyme induction. We also found new inducers, d- and l-methionine, S-methyl-L-cysteine, cysteic acid, and 2-aminoethane sulfonic acid. However, the induction level of both enzymes by new inducers was much lower than those by L-ATC and D-ATC. Furthermore, the induction rate of both enzymes was synergistically increased only under a combination of D,L-ATC and new inducers. S-Compounds, however, such as new inducers except S-methyl-L-cysteine, inhibited both enzyme activities. This is the first report on the new inducers, synergistic induction, and the new inhibitors of L-ATCase and L-NCCase.     

p38alpha mitogen-activated protein kinase plays a critical role in cardiomyocyte survival but not in cardiac hypertrophic growth in response to pressure overload

The molecular mechanism for the transition from cardiac hypertrophy, an adaptive response to biomechanical stress, to heart failure is poorly understood. The mitogen-activated protein kinase p38alpha is a key component of stress response pathways in various types of cells. In this study, we attempted to explore the in vivo physiological functions of p38alpha in hearts. First, we generated mice with floxed p38alpha alleles and crossbred them with mice expressing the Cre recombinase under the control of the alpha-myosin heavy-chain promoter to obtain cardiac-specific p38alpha knockout mice. These cardiac-specific p38alpha knockout mice were born normally, developed to adulthood, were fertile, exhibited a normal life span, and displayed normal global cardiac structure and function. In response to pressure overload to the left ventricle, they developed significant levels of cardiac hypertrophy, as seen in controls, but also developed cardiac dysfunction and heart dilatation. This abnormal response to pressure overload was accompanied by massive cardiac fibrosis and the appearance of apoptotic cardiomyocytes. These results demonstrate that p38alpha plays a critical role in the cardiomyocyte survival pathway in response to pressure overload, while cardiac hypertrophic growth is unaffected despite its dramatic down-regulation.     

Phytotoxic cis-cinnamoyl glucosides from Spiraea thunbergii

Spiraea thunbergii Sieb. was found to contain 1-O-cis-cinnamoyl-beta-D-glucopyranose and 6-O-(4'-hydroxy-2'-methylene-butyroyl)-1-O-cis-cinnamoyl-beta-D-glucopyranose as major plant growth inhibitory constituents along with related compounds of lower phytotoxicity including 6-O-(trans-cinnamoyl)-1-O-(4"-hydroxy-3"-methyl-furan-2"-one)-beta-D-glucopyranose, 6-O-(4'-hydroxy-2'-methylene-butyroyl)-1-O-trans-cinnamoyl-beta-D-glucopyranose, and 1-O-trans-cinnamoyl-beta-D-glucopyranose. The former three compounds were cinnamoyl glucosides.     

Serum concentrations of androstenediol and androstenediol sulfate, and their relation to cytokine production during and after normal pregnancy

Since it is known that androstenediol (ADIOL) has potent immunoregulatory effects, changes in ADIOL levels during and after pregnancy might affect the maternal immune system. We examined serum concentrations of ADIOL and androstenediol 3-sulfate (ADIOLS) together with IFN-gamma and IL-4 production levels during pregnancy and after delivery up to 10-11 months postpartum. The subjects were 73 normal pregnant, 76 normal postpartum, and 28 normal non-pregnant women. ADIOL and ADIOLS were measured using EIA and GC/MS, respectively. The cytokine levels in the supernatant of whole-blood cultures stimulated with phorbol 12-myristate 13-acetate and ionomycin were measured using ELISA. ADIOL levels significantly decreased compared to non-pregnant levels in the first trimester (P < 0.05) and were reversed in the third trimester (P < 0.05). After pregnancy, ADIOL levels gradually declined, and a significant decrease was observed at 10-11 months postpartum (P < 0.05). ADIOLS levels were significantly lower in the third trimester (P < 0.05) and significantly higher at the first month postpartum (P < 0.001) compared to non-pregnant women. IFN-gamma and IL-4 levels decreased during pregnancy and subsequently increased postpartum. On the other hand, we found significant negative correlations between ADIOL concentrations and production levels of IFN-gamma (P < 0.05) or IL-4 (P < 0.05). These findings suggest that ADIOL may be involved in modifying the maternal immune response during and after pregnancy.     

Quantitative examination of a perfusion microscope for the study of osmotic response of cells

The perfusion microscope was developed for the study of the osmotic response of cells. In this microscope, the cells are immobilized in a transparent chamber mounted on the stage and exposed to a variety of milieus by perfusing the chamber with solutions of different concentrations. The concentration of the supplied solution is controlled using two variable-speed syringe pumps, which supply an isotonic solution and a hypertonic solution. Before using this system to characterize the osmotic response of cells, the change in the concentration of NaCl solution flowing through the chamber is examined quantitatively using a laser interferometer and an image processing technique. The NaCl concentration is increased from an isotonic condition to a hypertonic condition abruptly or gradually at a given constant rate, and decreased from a hypertonic condition to an isotonic condition. It is confirmed that the concentration is nearly uniform in the cross direction at the middle of the chamber, and the change in the NaCl concentration is reproducible. The average rate of increase or decrease in the measured concentration agrees fairly well with the given rate when the concentration is changed gradually at a constant rate. The rate of the abrupt change is also determined to be the highest limit achieved by the present method. As the first application of using the perfusion microscope for biological studies, the volume change of cells after exposure to a hypertonic solution is measured. Then, the hydraulic conductivity of the cell membrane is determinedfrom the comparison of the volume change between the experiment and the theoretical estimation for the measured change in the NaCl concentration of the perfused solution.     

Direct observation of poly(3-hydroxybutyrate) depolymerase adsorbed on polyester thin film by atomic force microscopy

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerases adsorbed on poly(L-lactide) (PLLA) thin film were directly observed by atomic force microscopy (AFM). A PLLA thin film of 100 nm thickness was prepared on a silicon wafer by spin-cast method. The PLLA thin film was treated at 220 degrees C and quenched to room temperature, resulting in the formation of a completely amorphous film with a smooth surface. Then, the PHB depolymerases from Pseudomonas stutzeri YM1006 and Ralstonia pickettii T1 were dispersed on the amorphous PLLA thin film. Direct AFM observation has revealed that the PHB depolymerases bind in an elliptic shape on the surface of the PLLA thin film and that a small ridge is created around each enzyme molecule. After removal of the enzymes with 40% ethanol aqueous solution, small hollows were found on the PLLA thin film. These results suggest that a PHB depolymerase interacts with polyester molecules during their adsorption to make a hollow on the substrate surface.     

Uniaxial drawing and mechanical properties of poly[(R)-3-hydroxybutyrate]/poly(L-lactic acid) blends

Blends of poly(L-lactic acid) (PLLA) with two kinds of poly[(R)-3-hydroxybutyrate] (PHB) having different molecular weights, commercial-grade bacterial PHB (bacterial-PHB) and ultrahigh molecular weight PHB (UHMW-PHB), were prepared by the solvent-casting method and uniaxially drawn at two drawing temperatures, around PHB's T(g) (2 degrees C) for PHB-rich blends and around PLLA's T(g) (60 degrees C) for PLLA-rich blends. Differential scanning calorimetry analysis showed that this system was immiscible over the entire composition range. Mechanical properties of all of the samples were improved in proportion to the draw ratio. Although PLLA domains in bacterial-PHB-rich blends remained almost unstretched during cold drawing, a good interfacial adhesion between two polymers and the reinforcing role of PLLA components led to enhanced mechanical properties proportionally to the PLLA content at the same draw ratio. On the contrary, in the case of UHMW-PHB-rich blends, the minor component PLLA was found to be also oriented by cold drawing in ice water due to an increase in the interfacial entanglements caused by the very long chain length of the matrix polymer. As a result, their mechanical properties were considerably improved with increasing PLLA content compared with the bacterial-PHB system. Scanning electron microscopy observations on the surface and cross-section revealed that a layered structure with uniformly oriented microporous in the interior was obtained by selectively removal of PLLA component after simple alkaline treatment.