Species-specific duplications driving the recent expansion of NBS-LRR genes in five Rosaceae species

Background

Disease resistance (R) genes from different Rosaceae species have been identified by map-based cloning for resistance breeding. However, there are few reports describing the pattern of R-gene evolution in Rosaceae species because several Rosaceae genome sequences have only recently become available.

Results

Since most disease resistance genes encode NBS-LRR proteins, we performed a systematic genome-wide survey of NBS-LRR genes between five Rosaceae species, namely Fragaria vesca (strawberry), Malus × domestica (apple), Pyrus bretschneideri (pear), Prunus persica (peach) and Prunus mume (mei) which contained 144, 748, 469, 354 and 352 NBS-LRR genes, respectively. A high proportion of multi-genes and similar Ks peaks (Ks = 0.1- 0.2) of gene families in the four woody genomes were detected. A total of 385 species-specific duplicate clades were observed in the phylogenetic tree constructed using all 2067 NBS-LRR genes. High percentages of NBS-LRR genes derived from species-specific duplication were found among the five genomes (61.81% in strawberry, 66.04% in apple, 48.61% in pear, 37.01% in peach and 40.05% in mei). Furthermore, the Ks and Ka/Ks values of TIR-NBS-LRR genes (TNLs) were significantly greater than those of non-TIR-NBS-LRR genes (non-TNLs), and most of the NBS-LRRs had Ka/Ks ratios less than 1, suggesting that they were evolving under a subfunctionalization model driven by purifying selection.

Conclusions

Our results indicate that recent duplications played an important role in the evolution of NBS-LRR genes in the four woody perennial Rosaceae species. Based on the phylogenetic tree produced, it could be inferred that species-specific duplication has mainly contributed to the expansion of NBS-LRR genes in the five Rosaceae species. In addition, the Ks and Ka/Ks ratios suggest that the rapidly evolved TNLs have different evolutionary patterns to adapt to different pathogens compared with non-TNL resistant genes.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1291-0) contains supplementary material, which is available to authorized users.     

Genomic and transcriptomic analysis of the endophytic fungus Pestalotiopsis fici reveals its lifestyle and high potential for synthesis of natural products

Background

In recent years, the genus Pestalotiopsis is receiving increasing attention, not only because of its economic impact as a plant pathogen but also as a commonly isolated endophyte which is an important source of bioactive natural products. Pestalotiopsis fici Steyaert W106-1/CGMCC3.15140 as an endophyte of tea produces numerous novel secondary metabolites, including chloropupukeananin, a derivative of chlorinated pupukeanane that is first discovered in fungi. Some of them might be important as the drug leads for future pharmaceutics.

Results

Here, we report the genome sequence of the endophytic fungus of tea Pestalotiopsis fici W106-1/CGMCC3.15140. The abundant carbohydrate-active enzymes especially significantly expanding pectinases allow the fungus to utilize the limited intercellular nutrients within the host plants, suggesting adaptation of the fungus to endophytic lifestyle. The P. fici genome encodes a rich set of secondary metabolite synthesis genes, including 27 polyketide synthases (PKSs), 12 non-ribosomal peptide synthases (NRPSs), five dimethylallyl tryptophan synthases, four putative PKS-like enzymes, 15 putative NRPS-like enzymes, 15 terpenoid synthases, seven terpenoid cyclases, seven fatty-acid synthases, and five hybrids of PKS-NRPS. The majority of these core enzymes distributed into 74 secondary metabolite clusters. The putative Diels-Alderase genes have undergone expansion.

Conclusion

The significant expansion of pectinase encoding genes provides essential insight in the life strategy of endophytes, and richness of gene clusters for secondary metabolites reveals high potential of natural products of endophytic fungi.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-014-1190-9) contains supplementary material, which is available to authorized users.     

Diversity and virulence of soil-dwelling fungi Isaria spp. and Paecilomyces spp. against Solenopsis invicta (Hymenoptera: Formicidae)

To comprehend the diversity and potential control of soil-dwelling fungi, Isaria and Paecilomyces, against the red imported fire ant Solenopsis invicta (Hymenoptera, Formicidae), an investigation was carried out between 2004 and 2008. From 258 soil samples collected from 16 central and southern provinces and cities in China, a total of 171 isolates of the genra Isaria and Paecilomyce were isolated, and the species I. javanicus, P. marquandii and I. fumosoroseus were found more abundant than I. cateniobliquus, P. carneus, P. inflatus and P. lilacinus. Geographic differences of isolating rates were observed as well. Samples from the southern areas had higher fungal isolating rates than those from the central areas. Subsequently, 47 isolates were further tested for pathogencity against the red imported fire ant. All isolates except P115 showed certain pathogenic potential (the mean is 52.3% at 4000 conidiospores/mL) to the ant. I. javanicus was the most effective species with a mean pathogenicity of 80.6%, while pathogenicities of P. marquandii, P. gunni and I. fumosoroseus were 44, 21 and 49%, respectively. Furthermore, the more effective isolates P028 of I. javanicus and P003 of I. fumosoroseus were tested in a virulence experiment. The LD₅₀ values of P028 and P003 against major and miner workers were determined as 412,280 and 854,451 conidiospores/cm², respectively. Meanwhile, the LT₅₀ values at 1000 conidiospores/cm² were 7.1 and 6.6 d in isolate P003 and 6.8 and 6.6 d in isolate P028.     

Biomolecule-stabilized Au nanoclusters as a fluorescence probe for sensitive detection of glucose

In this work, biomolecule-stabilized Au nanoclusters were demonstrated as a novel fluorescence probe for sensitive and selective detection of glucose. The fluorescence of Au nanoclusters was found to be quenched effectively by the enzymatically generated hydrogen peroxide (H(2)O(2)). By virtue of the specific response, the present assay allowed for the selective determination of glucose in the range of 1.0×10(-5) M to 0.5×10(-3) M with a detection limit of 5.0×10(-6) M. The absorption spectroscopy, X-ray photoelectron spectroscopy (XPS) and fluorescence decay studies were then performed to discuss the quenching mechanism. In addition, we demonstrated the application of the present approach in real serum samples, which suggested its great potential for diagnostic purposes.     

Amperometric sensors based on Ni/Al and Co/Al layered double hydroxides modified electrode and their application for hydrogen peroxide detection

Two different hydrogen peroxide sensors were constructed with Ni/Al and Co/Al layered double hydroxides (LDHs) modified glassy carbon electrodes (GCE). Ni (Co)/Al-LDHs were synthesized by electrochemical method and were characterized by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The advantages and shortcoming of the two hydrogen peroxide sensors were described in detail. Compared to Co/Al-LDHs modified electrode, sensors fabricated by Ni/Al-LDHs showed quicker heterogeneous electron transfer rate constants (k(s)), lower detection and better reproducibility. But Co/Al-LDHs modified electrode held the advantages of wider linear range and higher sensitivity. Further more, the different catalytic redox mechanisms of hydrogen peroxide on the Ni/Al/GCE and Co/Al/GCE were firstly comparatively explored.     

Electrochemical aptasensor using the tripropylamine oxidation to probe intramolecular displacement between target and complementary nucleotide for protein array

Tripropylamine (TPA) has different oxidation efficiency at double stranded (ds)-and single stranded (ss)-DNA-modified electrodes. Using this property, a simple but sensitive biosensor using TPA oxidation to probe the intramolecular displacement was constructed with the analysis of lysozyme as model for the first time. After the complementary ss-DNA strand of anti-lysozyme aptamer was immobilized onto gold electrode via gold-thiol bond, the incubation with the aptamer resulted in the formation of ds-DNA. Lysozyme (in 10 μL sample) binding with aptamer displaced the complementary strand because of the high affinity of lysozyme and its aptamer, corresponding to the dissociation of the ds-DNA. The modified electrode was swept in 20mM TPA solution from 0.2 to 0.95 V. The difference in oxidation current was used to quantify the content of lysozyme with a linear range from 1.0 pM to 1.1 nM. That means 10 amol or 6.0 × 10(6) lysozyme molecules can be detected. Because the signal is produced from the preconcentrated TPA at the electrode surface, the high sensitivity is achieved over the single site labelling strategy. The proposed method is simple, stable, specific, and time-saving while the complicated sample pre-treatment and the labelling to the DNA strand are avoided. The biosensor was validated by the analysis of the diluted egg white sample directly. The recovery and reproducibility were 93.3-100% and 1.4-4.2%, respectively.     

A label-free electrochemical DNA sensor based on exonuclease III-aided target recycling strategy for sequence-specific detection of femtomolar DNA

The present work demonstrates a rapid, single-step and ultrasensitive label-free and signal-off electrochemical sensor for specific DNA detection with excellent discrimination ability for single-nucleotide polymorphisms, taking advantage of Exonuclease III (Exo III)-aided target recycling strategy to achieve signal amplification. Exo III has a specifical exo-deoxyribonuclease activity for duplex DNAs in the direction from 3' to 5' terminus, however its activity on the duplex DNAs with 3'-overhang and single-strand DNA is limited. In response to the specific features of Exo III, the proposed E-DNA sensor is designed such that, in the presence of target DNA, the electrode self-assembled signaling probe hybridizes with the target DNA to form a duplex in the form of a 3'-blunt end at signaling probe and a 3'-overhang end at target DNA. In this way, Exo III specifically recognizes this structure and selectively digests the signaling probe. As a result, the target DNA dissociates from the duplex and recycles to hybridize with a new signaling probe, leading to the digestion of a large amount of signaling probes gradually. A redox mediator, Ru(NH(3))(6)(3+) (RuHex) is employed to electrostatically adsorbed onto signaling probes, which is directly related to the amount and the length of the signaling probes remaining in the electrode, and provides a quantitative measure of sequence-specific DNA with the experimentally measured (not extrapolated) detection limit as low as 20 fM. Moreover, this E-DNA sensor has an excellent differentiation ability for single mismatches with fairly good stability.     

One-step "green" preparation of graphene nanosheets and carbon nanospheres mixture by electrolyzing graphite rob and its application for glucose biosensing

The graphene nanosheets and carbon nanospheres mixture (GNS–CNS) was prepared by electrolyzing graphite rob in KNO₃ solution under constant current, which was characterized by TEM, AFM, SEM, FT-IR, XRD, XPS, TGA and UV–vis. The nano-mixture can keep stable in water for more than one month. Based on this kind of mixture material, a novel electrochemical biosensing platform for glucose determination was developed. Cyclic voltammetry of glucose oxidase (GOD) immobilized on GNS–CNS/GCE exhibited a pair of well-defined quasi-reversible redox peaks at −0.488 V (E_pa) and −0.509 V (E_pc) by direct electron transfer between the protein and the electrode. The charge-transfer coefficient (α) was 0.51, the electron transfer rate constant was 2.64 s⁻¹ and the surface coverage of HRP was 3.18 × 10⁻¹⁰ mol cm⁻². The immobilized GOD could retain its bioactivity and catalyze the reduction of dissolved oxygen. The glucose biosensor has a linear range from 0.4 to 20 mM with detection limit of 0.1 mM. Moreover, the biosensor exhibits acceptable reproducibility and storage stability. The fabricated biosensor was further used to determine glucose in human plasma sample with the recoveries from 96.83% to 105.52%. Therefore, GOD/GNS–CNS/GCE could be promisingly applied to determine blood sugar concentration in the practical clinical analysis.