Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy

Crystalline structures of cellulose (named as Cell 1), NaOH-treated cellulose (Cell 2), and subsequent CO2-treated cellulose (Cell 2-C) were analyzed by wide-angle X-ray diffraction and FTIR spectroscopy. Transformation from cellulose I to cellulose II was observed by X-ray diffraction for Cell 2 treated with 15-20 wt% NaOH. Subsequent treatment with CO2 also transformed the Cell 2-C treated with 5-10 wt% NaOH. Many of the FTIR bands including 2901, 1431, 1282, 1236, 1202, 1165, 1032, and 897 cm(-1) were shifted to higher wave number (by 2-13 cm(-1)). However, the bands at 3352, 1373, and 983 cm(-1) were shifted to lower wave number (by 3-95 cm(-1)). In contrast to the bands at 1337, 1114, and 1058 cm(-1), the absorbances measured at 1263, 993, 897, and 668 cm(-1) were increased. The FTIR spectra of hydrogen-bonded OH stretching vibrations at around 3352 cm(-1) were resolved into three bands for cellulose I and four bands for cellulose II, assuming that all the vibration modes follow Gaussian distribution. The bands of 1 (3518 cm(-1)), 2 (3349 cm(-1)), and 3 (3195 cm(-1)) were related to the sum of valence vibration of an H-bonded OH group and an intramolecular hydrogen bond of 2-OH ...O-6, intramolecular hydrogen bond of 3-OH...O-5 and the intermolecular hydrogen bond of 6-O...HO-3', respectively. Compared with the bands of cellulose I, a new band of 4 (3115 cm(-1)) related to intermolecular hydrogen bond of 2-OH...O-2' and/or intermolecular hydrogen bond of 6-OH...O-2' in cellulose II appeared. The crystallinity index (CI) was obtained by X-ray diffraction [CI(XD)] and FTIR spectroscopy [CI(IR)]. Including absorbance ratios such as A1431,1419/A897,894 and A1263/A1202,1200, the CI(IR) was evaluated by the absorbance ratios using all the characteristic absorbances of cellulose. The CI(XD) was calculated by the method of Jayme and Knolle. In addition, X-ray diffraction curves, with and without amorphous halo correction, were resolved into portions of cellulose I and cellulose II lattice. From the ratio of the peak area, that is, peak area of cellulose I (or cellulose II)/total peak area, CI(XD) were divided into CI(XD-CI) for cellulose I and CI(XD-CII) for cellulose II. The correlation between CI(XD-CI) (or CI(XD-CII)) and CI(IR) was evaluated, and the bands at 2901 (2802), 1373 (1376), 897 (894), 1263, 668 cm(-1) were good for the internal standard (or denominator) of CI(IR), which increased the correlation coefficient. Both fraction of the absorbances showing peak shift were assigned as the alternate components of CI(IR). The crystallite size was decreased to constant value for Cell 2 treated at >or= 15 wt% NaOH. The crystallite size of Cell 2-C (cellulose II) was smaller than that of Cell 2 (cellulose I) treated at 5-10 wt% NaOH. But the crystallite size of Cell 2-C (cellulose II) was larger than that of Cell 2 (cellulose II) treated at 15-20 wt% NaOH.     

Screening of Korean herbal medicines used to improve cognitive function for anti-cholinesterase activity.

Methanolic extracts of seven herbs (Acorus calamus, Acorus gramineus, Bupleurm facaltum, Dioscorea batatas, Epimedium koreanum, Poria cocos and Zizyphi jujuba) used in traditional Korean medicine for improvement of memory and cognition in old age were tested for cholinesterase inhibitory properties using the Ellman colorimetric method. Significant inhibition of the enzyme at 200 microg/ml was observed for extracts from A. calamus and E. koreanum. The possible bases for the reputation of these and the other herbs tested are discussed in the light of previous investigations into their chemistry and biological activity.     

Production of exopolysaccharides by submerged mycelial culture of a mushroom Tremella fuciformis

The optimization of submerged culture conditions for mycelial growth and exopolysaccharide (EPS) production in an edible mushroom Tremella fuciformis was studied in shake flasks and bioreactors. The temperature of 28 degrees C and pH 8 in the beginning of fermentation in agitated flasks was the most efficient condition to obtain maximum mycelial biomass and EPS. The optimal medium constituents were as follows (gL(-1)): glucose 20, tryptone 2, KH(2)PO(4) 0.46, K(2)HPO(4) 1 and MgSO(4).7H(2)O 0.5. The fungus was cultivated under various agitation and aeration conditions in a 5L stirred-tank bioreactor. The maximum cell mass and EPS production were obtained at a relatively high agitation speed of 200 rpm and at an aeration rate of 2 vvm. The flow behavior of the fermentation broth was Newtonian and the maximum apparent viscosity (35 cP) was observed at a highly aerated condition (2 vvm). The EPS productivity in an airlift reactor was higher than that in the stirred-tank reactor. The morphological study revealed that the fungus grows in mainly three different yeast-like forms: ovoid, elongated, and double yeast forms. The high population of the elongated yeast has a very close relationship to high EPS production. The EPS were protein-bound polysaccharides consisted of mainly mannose, xylose, and fucose. The molecular weights of EPS were determined to be (1.3-1.5)x10(6).     

Two enzymes in one; two yeast peroxiredoxins display oxidative stress-dependent switching from a peroxidase to a molecular chaperone function

Although a great deal is known biochemically about peroxiredoxins (Prxs), little is known about their real physiological function. We show here that two cytosolic yeast Prxs, cPrxI and II, which display diversity in structure and apparent molecular weights (MW), can act alternatively as peroxidases and molecular chaperones. The peroxidase function predominates in the lower MW forms, whereas the chaperone function predominates in the higher MW complexes. Oxidative stress and heat shock exposure of yeasts causes the protein structures of cPrxI and II to shift from low MW species to high MW complexes. This triggers a peroxidase-to-chaperone functional switch. These in vivo changes are primarily guided by the active peroxidase site residue, Cys(47), which serves as an efficient "H(2)O(2)-sensor" in the cells. The chaperone function of these proteins enhances yeast resistance to heat shock.     

Physical and hydrodynamic properties of flocs produced during biological hydrogen production

Dense flocs readily form in continuous culture bioreactors used for hydrogen production, but the fractal and hydrodynamic properties of these flocs have not been previously analyzed. We therefore examined the size distribution, fractal dimension, and hydrodynamic properties of flocs formed in a continuous flow, well-mixed reactor treating synthetic wastewater at a fixed condition of a 4.5 h hydraulic detention time (23 degrees C, pH 5.5). The reactor was operated for a total of 3 months at three different organic loading rates (27, 53, and 80 g-COD/L-d) with influent glucose concentrations of 5, 10, and 15 g-COD/L. At all three loading rates the removal of glucose was nearly complete (98.6-99.4%) and biomass was produced in proportion to the organic loading rate (0.86 +/- 0.11, 2.40 +/- 0.26, and 4.59 +/- 1.55 g/L of MLVSS in the reactor). Overall conversion efficiencies of glucose to hydrogen, evaluated on the basis of a maximum of 4 mol-H2/mol-glucose, increased with organic loading rates in the order 17.7%, 23.1%, and 25.6%. The gas contained 56.1 +/- 4.9% hydrogen, with the balance as carbon dioxide. No methane gas was detected. Under these conditions, flocs were produced with mean sizes that increased with organic loading, in the order 0.12 cm (5 g-COD/L), 0.35 cm (10 g-COD/L), and 0.58 cm (15 g-COD/L). As the average floc size increased, the flocs became on average denser and less fractal, with fractal dimensions increasing from 2.11 +/- 0.17 to 2.48 +/- 0.13. Floc porosities ranged from 0.75-0.96, and resulted in aggregate densities that allowed little intra-aggregate flow through the floc. As a result, average settling velocities were not appreciably larger than those predicted by Stokes' law for spherical, impermeable flocs. Our results demonstrate that dense, relatively impermeable flocs are produced in biohydrogen reactors that have settling properties in reasonable agreement with Stokes' law.     

Detection of insulin-antibody binding on a solid surface using imaging ellipsometry

Imaging ellipsometry (IE) was used to detect the binding of insulin to its antibody on a solid surface. The modification of a gold surface with 11-mecaptoundecanoic acid (11-MUA), the adsorption of protein G, and antibody immobilization onto the protein G layer were confirmed by surface plasmon resonance. Ellipsometric images and ellipsometric angles of the surface antibody were acquired using the IE system by off-null ellipsometry. Ellipsometric images of antigen binding to the antibody were acquired, and their mean optical intensities estimated. Changes in mean optical intensity indicated that the detection range for insulin was from 10 ng/ml to 100 microg/ml.     

Characteristics of a novel high viscosity polysaccharide,methylan, produced byMethylobacterium organophilum

Summary A new anionic high molecular weight polysaccharide, Methylan, was produced byMethylobacterium organophilum from methanol as a sole source of carbon and energy under the specific culture conditions. By GPC and light scattering, the molecular weight was determined to be 2–4×10⁶ dalton and the distribution of molecular weight was very homogeneous. Methylan was composed of carbohydrate (80%), uronic acid (12%), protein (6%) and pyruvic acid (5%). The sugar composition of Methylan was identified as glucose, galactose and mannose with the approximate molar ratio of 232. Methylan solution showed a pseudoplastic non-Newtonian fluid property at the concentration above 0.05%. At the concentration of 1% Methylan solution, the consistency index was 18,000 centipoise which was almost 10 times higher than that of Xanthan and the flow behavior index was 0.15.     

Structural Basis for Bacterial Quorum Sensing-mediated Oxalogenesis

The Burkholderia species utilize acetyl-CoA and oxaloacetate, substrates for citrate synthase in the TCA cycle, to produce oxalic acid in response to bacterial cell to cell communication, called quorum sensing. Quorum sensing-mediated oxalogenesis via a sequential reaction by ObcA and ObcB counteracts the population-collapsing alkaline pH of the stationary growth phase. Thus, the oxalic acid produced plays an essential role as an excreted public good for survival of the group. Here, we report structural and functional analyses of ObcA, revealing mechanistic features distinct from those of citrate synthase. ObcA exhibits a unique fold, in which a (β/α)₈-barrel fold is located in the C-domain with the N-domain inserted into a loop following α1 in the barrel fold. Structural analyses of the complexes with oxaloacetate and with a bisubstrate adduct indicate that each of the oxaloacetate and acetyl-CoA substrates is bound to an independent site near the metal coordination shell in the barrel fold. In catalysis, oxaloacetate serves as a nucleophile by forming an enolate intermediate mediated by Tyr³²² as a general base, which then attacks the thioester carbonyl carbon of acetyl-CoA to yield a tetrahedral adduct between the two substrates. Therefore, ObcA catalyzes its reaction by combining the enolase and acetyltransferase superfamilies, but the presence of the metal coordination shell and the absence of general acid(s) produces an unusual tetrahedral CoA adduct as a stable product. These results provide the structural basis for understanding the first step in oxalogenesis and constitute an example of the functional diversity of an enzyme for survival and adaptation in the environment.     

Complete genome sequence of Celeribacter bacteriophage P12053L

The Roseobacter clade has been recognized as one of the abundant bacterial lineages in marine environments, which makes the characterization of bacteriophages infecting members of the clade important. Here we report the complete genome sequence of bacteriophage P12053L, which infects Celeribacter sp. strain IMCC12053, a member of the Roseobacter clade.     

Thionine increases electricity generation from microbial fuel cell using Saccharomyces cerevisiae and exoelectrogenic mixed culture

Microbial fuel cells (MFCs) have been shown to be capable of clean energy production through the oxidation of biodegradable organic waste using various bacterial species as biocatalysts. In this study we found Saccharomyces cerevisiae, previously known electrochemcially inactive or less active species, can be acclimated with an electron mediator thionine for electrogenic biofilm formation in MFC, and electricity production is improved with facilitation of electron transfer. Power generation of MFC was also significantly increased by thionine with both aerated and non-aerated cathode. With electrochemically active biofilm enriched with swine wastewater, MFC power increased more significantly by addition of thionine. The optimum mediator concentration was 500 mM of thionine with S. cerevisae in MFC with the maximum voltage and current generation in the microbial fuel cell were 420 mV and 700 mA/m(2), respectively. Cyclic voltametry shows that thionine improves oxidizing and reducing capability in both pure culture and acclimated biofilm as compared to non-mediated cell. The results obtained indicated that thionine has great potential to enhance power generation from unmediated yeast or electrochemically active biofilm in MFC.