Kinetically Controlled Growth of Phase‐Pure SnS Absorbers for Thin Film Solar Cells: Achieving Efficiency Near 3% with Long‐Term Stability Using an SnS/CdS Heterojunction

Facile control over the morphology of phase pure tin monosulfide (SnS) thin films, a promising future absorber for thin film solar cells, is enabled by controlling the growth kinetics in vapor transport deposition of congruently evaporated SnS. The pressure during growth is found to be a key factor in modifying the final shape of the SnS grains. The optimized cube‐like SnS shows p‐type with the apparent carrier concentration of ≈10¹⁷ cm^?3 with an optical bandgap of 1.32 eV. The dense and flat surface morphology of 1 µm thick SnS combined with the minimization of pinholes directly leads to improved diode quality and increased shunt resistance of the SnS/CdS heterojunction (cell area of 0.30 cm²). An open‐circuit voltage of up to 0.3068 V is achieved, which is independently characterized at the Korea Institute of Energy Research (KIER). Detailed high‐resolution transmission electron microscopy analysis confirms the absence of detrimental secondary phases such as Sn₂S₃ or SnS₂ in the SnS grains or at intergrain boundaries. The initial efficiency level of 98.5% is maintained even after six months of storage in air, and the final efficiency of the champion SnS/CdS cell, certified at the KIER, is 2.938% with an open‐circuit voltage of 0.2912 V.     

Enhancing biodiesel production by immobilized whole cells by optimizing reaction conditions and adding glycerol and water

In this study, several methods were devised and evaluated to enhance biodiesel production by whole cells immobilized onto the polyurethane foam coated with activated carbon. Biodiesel conversion was increased to 76.4% with the increase in the number of polyurethane foam until it occupied 18.0 or 2.4% of reaction mixture based on apparent or actual volume of supports, respectively. Stepwise methanol addition to prevent methanol inhibition on the immobilized whole cells was optimized in terms of number of aliquot and feeding interval. When 4.5 molar ratio of methanol to soybean oil was divided into 4 equal aliquots and each aliquot was fed to the reaction mixture every 24 h, the highest final biodiesel conversion of 82.4% was achieved. Chemical treatment of the immobilized cells with 0.1% of chloroform for 2 h enhanced biodiesel conversion to 90.5%. The initial addition of 5% glycerol in the fresh reaction mixture increased biodiesel conversion to 90.3% while the removal of glycerol during biodiesel production barely increased biodiesel conversion. The biodiesel conversion was increased with the increase of initial water content in the fresh reaction mixture and the highest value was 92.7% at 3.0% of water content, but decreased thereafter. The effects of co-addition of glycerol and water on biodiesel production were also investigated, and the co-addition of 3.125% of glycerol and 1.875% of water relative to soybean oil substantially increased biodiesel conversion to 95.0%. By these optimization of reaction conditions and co-adding glycerol and water, initial biodiesel production rate and final biodiesel conversion were remarkably enhanced by 26.8 and 24.1%, respectively.     

Brassinosteroid signaling modulates submergence-induced hyponastic growth in <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis>

The role of brassinosteroids (BRs) in hyponastic growth induced by submergence was investigated in Arabidopsis thaliana. Under flooding conditions, exogenously applied BRs increased hyponastic growth of rosette leaves. This hyponastic growth was reduced in a BR insensitive mutant (bri1-5), while it was increased in a BR dominant mutant (bes1-D). Further, expression of hypoxia marker genes, HRE1 and HRE2, was elevated in submerged bes1-D. These results indicate that BRs exert a positive action on hyponastic growth of submerged Arabidopsis leaves. Expression of ethylene biosynthetic genes, such as ACS6, ACS8 and ACO1, which are up-regulated by submergence, was also activated by application of BRs and in bes1-D. The enhanced hyponastic growth in submerged bes1-D was significantly reduced by application of cobalt ion, suggesting that BRs control hyponastic growth via ethylene, which seems to be synthesized by ACO6 and ACO8 followed by ACO1 in submerged leaves. A double mutant, bes1-Dxaco1-1, showed hyponastic growth activity similar to that seen in aco1-1, demonstrating that the BR signaling for regulation of hyponastic growth seems to be an upstream event in ethylene-induced hyponastic growth under submergence in Arabidopsis.     

Optimization of a two-step biodiesel production process comprised of lipid extraction from blended sewage sludge and subsequent lipid transesterification

As a preliminary research for the development of feasible and economical biodiesel production using blended sewage sludge (BSS), a sustainable and non-edible feedstock, the two-step process comprised of lipid extraction (first step) and subsequent transesterification of the lipid with methanol (second step) was optimized. The total lipid content of the free fatty acid (FFA) containing BSS was determined to be 14.5% using the Blight and Dyer method with ultrasonication pretreatment, where 40.8% of the total lipid content was FFAs. The highest lipid yield of 13.5% (g-lipid/g-dry sludge), corresponding to 92.9% extraction efficiency, was obtained using 20 mL-solvent/g-dry sludge of the total solvent mixture with a 2/1 (v/v) ratio of chloroform and methanol. In the transesterification step, an acidic catalyst (H₂SO₄) exhibited significantly higher performance than an alkaline catalyst (NaOH). Thus, the optimal reaction conditions were 0.2% (g/g-lipid) H₂SO₄, 20 mL-methanol/g-lipid, 70°C and 8 h, respectively. Although the reaction temperature was increased from 50 to 70°C, we could save H₂SO₄, methanol, and a reaction time by 75, 50 and 66.7%, respectively compared with previous optimal conditions suggest by others’ research. Under our optimal conditions, a biodiesel yield of 39.0% (g-biodiesel/g-lipid) and an overall yield (i.e., extraction and transesterification) of 5.3% (g-biodiesel/g-BSS) were achieved, which are substantially higher than those from others’ research.     

Identification and biosynthesis of C-24 ethylidene brassinosteroids in <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis>

Isofucosterol is a major 4-demethylsterol which has an ethylidene group at C-24 in Arabidopsis thaliana. To evaluate the presence of brassinosteroids (BRs) with the same carbon skeleton as that of isofucosterol, a large quantity of A. thaliana was extracted and purified. GC-MS/selected ion monitoring analysis verified that 6-deoxohomodolichosterone and homodolichosterone are present in Arabidopsis. An enzyme solution prepared from wild type Arabidopsis successfully mediated conversion of 6-deoxohomodolichosterone to homodolichosterone. However, a double mutant cyp85a1/cyp85a2 could not catalyze the conversion, implying that in A. thaliana the C-6 oxidation of 6-deoxohomodolichosterone to homodolichosterone seems to be catalyzed by CYP85A1 and/or CYP85A2. In yeast, both heterologously expressed CYP85A1 and CYP85A2 catalyzed the C-6 oxidation of 6- deoxohomodolichosterone to homodolichosterone, but the conversion rate in CYP85A2/V60/WAT21 was significantly higher than that in CYP85A1/V60/WAT21, indicating that C-6 oxidation of 6-deoxohomodolichosterone to homodolichosterone is mainly catalyzed by CYP85A2 in A. thaliana. Taken together, this study strongly suggests that a biosynthetic pathway for the production of 6-deoxohomodolichosterone and homodolichosterone is functional, and CYP85As have important roles in 24-ethylidene biosynthesis in A. thaliana.     

Resonance Raman studies of cytochrome P450BM3 and its complexes with exogenous ligands.

Resonance Raman spectra are reported for both the heme domain and holoenzyme of cytochrome P450BM3 in the resting state and for the ferric NO, ferrous CO, and ferrous NO adducts in the absence and presence of the substrate, palmitate. Comparison of the spectrum of the palmitate-bound form of the heme domain with that of the holoenzyme indicates that the presence of the flavin reductase domain alters the structure of the heme domain in such a way that water accessibility to the distal pocket is greater for the holoenzyme, a result that is consistent with analogous studies of cytochrome P450cam. The data for the exogenous ligand adducts are compared to those previously reported for corresponding derivatives of cytochrome P450cam and document significant and important differences for the two proteins. Specifically, while the binding of substrate induces relatively dramatic changes in the nu(Fe-XY) modes of the ferrous CO, ferric NO, and ferrous NO derivatives of cytochrome P450cam, no significant changes are observed for the corresponding derivatives of cytochrome P450BM3 upon binding of palmitate. In fact, the spectral data for substrate-free cytochrome P450BM3 provide evidence for distortion of the Fe-XY fragment, even in the absence of substrate. This apparent distortion, which is nonexistent in the case of substrate-free cytochrome P450cam, is most reasonably attributed to interaction of the Fe-XY fragment with the F87 phenylalanine side chain. This residue is known to lie very close to the heme iron in the substrate-free derivative of cytochrome P450BM3 and has been suggested to prevent hydroxylation of the terminal, omega, position of long-chain fatty acids.     

Vibrio vulnificus RTX toxin kills host cells only after contact of the bacteria with host cells

Vibrio vulnificus causes acute cell death and a fatal septicaemia. In this study, we show that contact with host cells is a prerequisite to the acute cytotoxicity. We screened transposon mutants defective in the contact-dependent cytotoxicity . Two mutants had insertions within two open reading frames in a putative RTX toxin operon, the rtxA1 or rtxD encoding an RTX toxin (4701 amino acids) or an ABC type transporter (467 amino acids). An rtxA1 mutation resulted in a cytotoxicity defect, which was fully restored by in trans complementation. The expression of RtxA1 toxin increased after host cell contact in a time-dependent manner. The RtxA1 toxin induced cytoskeletal rearrangements and plasma membrane blebs, which culminated in a necrotic cell death. RtxA1 colocalized with actin and caused actin aggregation coinciding with a significant decrease in the F/G actin ratio. The RtxA1 toxin caused haemolysis through pore formation (radius 1.63 nm). The rtxA1 deletion mutant was defective in invading the blood stream from ligated ileal loops of CD1 mice. The rtxA1 null mutation resulted in over 100-fold increase in both intragastric and intraperitoneal LD₅₀s against mice. Overall, these results show that the RtxA1 toxin is a multifunctional cytotoxin and plays an essential role in the pathogenesis of V. vulnificus infections.     

HIV-1 Tat-mediated protein transduction of human brain creatine kinase into PC12 cells

Epilepsy is characterized by the presence of spontaneous episodes of abnormal neuronal discharges and its pathogenic mechanisms remain poorly understood. Recently, we found that the expression of creatine kinase (CK) was markedly decreased in an epilepsy animal model using proteomic analysis. A human CK gene was fused with a HIV-1 Tat peptide to generate an in-frame Tat-CK fusion protein. The purified Tat-CK fusion protein was efficiently transduced into PC12 cells in a time- and dose-dependent manner when added exogenously to culture media. Once inside the cells, the transduced Tat-CK fusion protein was stable for 48 h. Moreover, the Tat-CK fusion protein markedly increased endogenous CK activity levels within the cells. These results suggest that Tat-CK provides a strategy for the therapeutic delivery of proteins in various human diseases including the delivery of CK for potential epilepsy treatment.