Establishment of Transfer Functions of the Pollen-Climatic Factors in Northern China and the Quantitative Climatic Reconstruction at DJ Core

The 2.4 meter-long core was extracted from the Diaojiao lake (41º18′N, 112º21′E) at the foot of the northern part of Daqingshan Mts. Pollen analysis from collections subsampled in the laboratory at 2 cm intervals, revealed plentiful pollen and spores from over 10 arboreal genera, including Pinus, Betula, Picea, Abies, Carpinus, Quercus, Ulmus and more than 20 non-arboreal genera, mainly of Artemisia, Labiatae, Nitraria, Polygonaceae, Ranunculus, Thalictrum, Umbel- liferae, Caryophyllaceae and Cyperaceae. Fern spores, aquatic pollen and algae were also observed in some parts of the core. The transfer functions were established by the stepwise regression analysis using the climatic factors and 13 pollen taxa. The different Fl and F2 value were used as the thresh- old value of F test (i. e. used for selecting and deleting factors). Each regressed equation was obtained from 70 times of calculations with a step-wise increase of 0.1 for Fl and F2 and those having the smallest regression deviation and the largest multiple correlation coefficient were the final four transfer functions. Substituting the pre-factor obtained from the stratigraphic sampled into the regression equations, the estimates of temperature and precipitation in January and in July, and annual mean temperature values could be calculated. Some climatic stages were inferred from total pollen influx and pollen percentage from the core using a transfer function: humid-cool (from 10 000 to 7 800 a BP), arid-cold (9 200 to 7 900 a BP), arid-warm (7 900 to 7 100 a BP), humid-warm (7 100 to 4 400 a BP), arid-warm (4 400 to 3 000 a BP), arid-cold (3 000 to 2 100 a BP). The highest annual mean temperature during Holocene was ca. 4 ℃ higher and the lowest was ca. 2 ℃ lower than the present temperature. Annual precipitation was 250 mm higher and 300 mm lower than the present.     

Anti-IL-33 antibody treatment inhibits airway inflammation in a murine model of allergic asthma

Interleukin (IL)-33 is a recently described member of the IL-1 family and has been shown to induce production of T helper type 2 cytokines. In this study, an anti-IL-33 antibody was evaluated against pulmonary inflammation in mice sensitized and challenged with ovalbumin. The anti-IL-33 or a control antibody (150 μg/mouse) was given intraperitoneally as five doses before the sensitization and antigen challenge. Treatment with anti-IL-33 significantly reduced serum IgE secretion, the numbers of eosinophils and lymphocytes, and concentrations of IL-4, IL-5, and IL-13 in bronchoalveolar lavage fluid compared with administration of a control antibody. Histological examination of lung tissue demonstrated that anti-IL-33 significantly inhibited allergen-induced lung eosinophilic inflammation and mucus hypersecretion. Our data demonstrate for the first time that anti-IL-33 antibody can prevent the development of asthma in a mouse model and indicate that blockade of IL-33 may be a new therapeutic strategy for allergic asthma.     

IGF-1 Reduces BACE-1 Expression in PC12 Cells via Activation of PI3-K/Akt and MAPK/ERK1/2 Signaling Pathways

Insulin-like growth factor 1 (IGF-1) stimulates α-secretase processing of amyloid precursor protein (APP) and decreases Aβ production. Little is known about the relationship between IGF-1 and β-site amyloid precursor protein cleaving enzyme 1 (BACE-1), the protease essential for the production of β-amyloid peptides (Aβ). Here, we investigated the effect of IGF-1 on BACE-1 in PC12 cells. Quantitative polymerase chain reaction analysis and western blot showed that treatment of cells with IGF-1 significantly decreased the levels of BACE-1 mRNA and protein. Furthermore, IGF-1 increased the phosphorylation of Akt and ERK1/2. The presence of the phosphatidylinositol 3-kinase (PI3-K) inhibitor LY294002 and the mitogen-activated protein kinase kinases (MEK) inhibitor PD98059 blocked the effect of IGF-1 on BACE-1. Our data indicated that IGF-1-induced reduction of BACE-1 might involve the PI3-K/Akt and MAPK/ERK1/2 signaling pathways.     

Synthesis, structural and electrochemical features of alicyclic and aromatic α,α′-N2- and-S2-dioximate macrobicyclic cobalt(II,III) and ruthenium(II) tris-complexes

The triribbed-functionalized cobalt(II,III) and ruthenium(II) clathrochelate derivatives of the vic-dioximes with two nitrogen or sulfur atoms in α-positions to π-conjugated diazomethine chelate fragments of a macrobicyclic framework were obtained in moderate yields under mild and high dilution conditions by nucleophilic substitution of six reactive chlorine atoms of the boron-capped macrobicyclic cobalt and ruthenium(II) precursors with N₂- and S₂-dinucleophiles (ethylenediamine and the corresponding α-dithiols in the presence of triethylamine, respectively). The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-Vis, ¹H and ¹³C{¹H} NMR and EPR spectroscopies, magnetochemistry and X-ray crystallography. The MN₆-coordination polyhedra of all the X-ray studied clathrochelates possess a slightly distorted trigonal prismatic geometry. The encapsulated cobalt(II) ions are shifted from the centers of the cavities formed by the macrobicyclic ligand due to the Jahn-Teller distortion, while the ruthenium and iron(II) ions in their clathrochelate analogs do occupy these centers. The main geometrical parameters of the macrobicyclic frameworks vary with Shannon radius of an encapsulated metal ion. In the case of the tris-ethylenediamine cobalt(III) clathrochelate, the field strength of the macrobicyclic amine ligand is essentially lower than those for their aromatic and aliphatic analogs because of the negative σ_para-effect of the ribbed alkylamine substituents. The magnetometry and EPR data confirmed the low-spin character of the cobalt(II) complexes synthesized. The electrochemically generated oxidized cobalt clathrochelates are stable in the CVA time scale, whereas their ruthenium- and iron-containing analogs as well as the reduced forms of all the cobalt, ruthenium and iron complexes obtained are unstable.     

Biflavonoids are superior to monoflavonoids in inhibiting amyloid-β toxicity and fibrillogenesis via accumulation of nontoxic oligomer-like structures

Polymerization of monomeric amyloid-β peptides (Aβ) into soluble oligomers and insoluble fibrils is one of the major pathways triggering the pathogenesis of Alzheimer's disease (AD). Using small molecules to prevent the polymerization of Aβ peptides can, therefore, be an effective therapeutic strategy for AD. In this study, we investigate the effects of mono- and biflavonoids in Aβ42-induced toxicity and fibrillogenesis and find that the biflavonoid taiwaniaflavone (TF) effectively and specifically inhibits Aβ toxicity and fibrillogenesis. Compared to TF, the monoflavonoid apigenin (AP) is less effective and less specific. Our data show that differential effects of the mono- and biflavonoids in Aβ fibrillogenesis correlate with their varying cytoprotective efficacies. We also find that other biflavonoids, namely, 2',8'-biapigenin, amentoflavone, and sumaflavone, can also effectively inhibit Aβ toxicity and fibrillogenesis, implying that the participation of two monoflavonoids in a single biflavonoid molecule enhances their activity. Biflavonoids, while strongly inhibiting Aβ fibrillogenesis, accumulate nontoxic Aβ oligomeric structures, suggesting that these are off-pathway oligomers. Moreover, TF abrogates the toxicity of preformed Aβ oligomers and fibrils, indicating that TF and other biflavonoids may also reduce the toxicity of toxic Aβ species. Altogether, our data clearly show that biflavonoids, possibly because of the possession of two Aβ binders separated by an appropriate size linker, are likely to be promising therapeutics for suppressing Aβ toxicity.     

Increased abundance of the non-indigenous zooplanktivore, <Emphasis Type=Italic>Bythotrephes longimanus</Emphasis>, is strongly correlated with greater spring prey availability in Canadian Shield lakes

The non-indigenous zooplanktivore, Bythotrephes longimanus, is a large Palaearctic cladoceran that is spreading rapidly in the Great Lakes watershed in North America. As a voracious predator, Bythotrephes can reduce herbivorous cladoceran abundance and diversity; however, the variables that affect its abundance are not well understood. To determine what bottom-up factors are associated with the abundance and seasonal dynamics of established Bythotrephes populations, two Bythotrephes datasets from lakes in south-central Ontario, Canada, were analysed using multiple regression and multivariate analyses: a multi-lake dataset of nine lakes sampled in 2003 and a multi-year dataset of one of these lakes, Harp Lake, sampled from 1994–1998 and 2001–2004. Bottom-up variables tested were Secchi disk depth, epilimnetic temperature, cladoceran (prey) density, total phosphorus, dissolved organic carbon and Chlorophyll a, as well as maximum depth for the multi-lake dataset. In both analyses and datasets, springtime abundance of herbivorous cladocerans was consistently found to be a significant factor associated with Bythotrephes (June–September) abundance; Bythotrephes annual abundance was significantly and positively associated with mean May and June prey abundance, along with mean Secchi disk depth for the multi-lake dataset, and groups of lakes or years with similar Bythotrephes seasonal abundance patterns were predicted by June prey abundance. Additionally, prey availability was the dominant contributor towards changes in weekly Bythotrephes birth rates calculated for two of the study lakes. Our study suggests that prey availability influences Bythotrephes abundance, which provides evidence that Bythotrephes establishment success is affected by the abundance of its prey.     

The effect of calciums on molecular motions of proteinase K

The native serine protease proteinase K binds two calcium cations. It has been reported that Ca²⁺ removal decreased the enzyme’s thermal stability and to some extent the substrate affinity, but has discrepant effects on catalytic activity of the enzyme. Molecular dynamics simulations were performed on the Ca²⁺-bound and Ca²⁺-free proteases to investigate the mechanism by which the calciums affect the structural stability, molecular motions, and catalytic activity of proteinase K. Very similar structural properties were observed between these two forms of proteinase K during simulations; and several long-lived hydrogen bonds and salt bridges common to both forms of proteinase K were found to be crucial in maintaining the local conformations around these two Ca²⁺ sites. Although Ca²⁺ removal enhanced the overall flexibility of proteinase K, the flexibility in a limited number of segments surrounding the substrate-binding pockets decreased. The largest differences in the equilibrium structures of the two simulations indicate that, upon the removal of Ca²⁺, the large concerted motion originating from the Ca1 site can transmit to the substrate-binding regions but not to the catalytic triad residues. In conjunction with the large overlap of the essential subspaces between the two simulations, these results not only provide insight into the dynamics of the underlying molecular mechanism responsible for the unchanged enzymatic activity as well as the decreased thermal stability and substrate affinity of proteinase K upon Ca²⁺ removal, but also complement the experimentally determined structural and biochemical data.     

A Durable Alternative for Proton‐Exchange Membranes: Sulfonated Poly(Benzoxazole Thioether Sulfone)s

To develop a durable proton‐exchange membrane (PEM) for fuel‐cell applications, a series of sulfonated poly(benzoxazole thioether sulfone)s ( SPTESBOs) are designed and synthesized, with anticipated good dimensional stability (via acid–base cross linking), improved oxidative stability against free radicals (via incorporation of thioether groups), and enhanced inherent stability (via elimination of unstable end groups) of the backbone. The structures and the degree of sulfonation of the copolymers are characterized using Fourier‐transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy (¹H NMR and ¹⁹F NMR). The electrochemical stabilities of the monomers are examined using cyclic voltammetry in a typical three‐electrode cell configuration. The physicochemical properties of the membranes vital to fuel‐cell performance are also carefully evaluated under conditions relevant to fuel‐cell operation, including chemical and thermal stability, proton conductivity, solubility in different solvents, water uptake, and swelling ratio. The new membranes exhibit low dimensional change at 25°C to 90°C and excellent thermal stability up to 250°C. Upon elimination of unstable end groups, the co‐polymers display enhanced chemical resistance and oxidative stability in Fenton's test. Further, the SPTESBO‐HFB‐60 (HFB‐60=hexafluorobenzene, 60 mol% sulfone) membrane displays comparable fuel‐cell performance to that of an NRE 212 membrane at 80°C under fully humidified condition, suggesting that the new membranes have the potential to be more durable but less expensive for fuel‐cell applications.