Growth kinetics of Lactobacillus acidophilus under ohmic heating

Lactobacillus acidophilus OSU133 was inoculated into MRS broth in a fermenter vessel and incubated at 30, 35, or 45 degrees C with agitation. Incubation temperatures were attained by conventional or ohmic heating. An electrical current at low (15 V) or high (40 V) voltage was used to heat the culture directly during fermentations under ohmic heating. The growth parameters (lag period, minimum generation time, and maximum growth) and changes in pH were determined during fermentation. Metabolic activities (consumption of glucose and production of lactic acid and bacteriocin) were determined during fermentation at 35 degrees C under both heating methods. Lag period for L. acidophilus was affected appreciably by the method of heating, but the magnitude of these changes depended on the fermentation temperature. When fermentation was done at 30 degrees C, lag period decreased by 94% under low-voltage ohmic, compared with conventional, heating methods. Ohmic heating did not change the generation time significantly and caused slight, but significant (p < 0.01) decrease in maximum growth. Therefore, the electric current enhances the early stages, but it inhibits the late stages of growth. Ohmic, compared with conventional, heating resulted in higher final pH and lower bacteriocin activity in the fermented medium. However, ohmic heating at 35 degrees C had minimal effect on glucose utilization and lactic acid production by L. acidophilus. Results show that measurement of the electric current when ohmic heating is done at a constant voltage may be used in monitoring such fermentations. In conclusion, ohmic heating is potentially useful in certain applications related to fermented foods. (c) 1996 John Wiley & Sons, Inc.     

Homogeneous transport in a heterogeneous membrane: water diffusion across human stratum corneum in vivo.

The objective of this study was to determine whether a structurally heterogeneous biomembrane, human stratum corneum (SC), behaved as a homogeneous barrier to water transport. The question is relevant because the principal function of the SC in vivo is to provide a barrier to the insensible loss of tissue water across the skin. Impedance spectra (IS) of the skin and measurements of the rate of transepidermal water loss (TEWL) were recorded sequentially in vivo in human subjects as layers of the SC were progressively removed by the serial application of adhesive tape strips. The low-frequency (< or = 100 rad s-1) impedance of skin was much more significantly affected by tape stripping than the higher frequency values; removal of the outermost SC layer had the largest effect. In contrast, TEWL changed little as the outer SC layers were stripped off, but increased dramatically when 6-8 microns of the tissue had been removed. It follows that the two noninvasive techniques probe SC barrier integrity in somewhat different ways. After SC removal, recovery of barrier function, as assessed by increasing values of the low-frequency impedance, apparently proceeded faster than TEWL decreased to the prestripping control. The variation of TEWL as a function of SC removal behaved in a manner entirely consistent with a homogeneous barrier, thereby permitting the apparent SC diffusivity of water to be found. Skin impedance (low frequency) was correlated with the relative concentration of water within the SC, thus providing an in vivo probe for skin hydration. Finally, the SC permeability coefficient to water, as a function of SC thickness, was calculated and correlated with the corresponding values of skin admittance derived from IS.     

Micropipette suction for measuring piconewton forces of adhesion and tether formation from neutrophil membranes.

A new method for measuring piconewton-scale forces that employs micropipette suction is presented here. Spherical cells or beads are used directly as force transducers, and forces as small as 10-20 pN can be imposed. When the transducer is stationary in the pipette, the force is simply the product of the suction pressure and the cross-sectional area of the pipette minus a small correction for the narrow gap that exists between the transducer and the pipette wall. When the transducer is moving along the pipette, the force on it is corrected by a factor that is proportional to the ratio of its velocity relative to its drag-free velocity. With this technique, the minimum force required to form a membrane tether from neutrophils is determined (45 pN), and the length of the microvilli on the surface of neutrophils is inferred. The strength of this technique is in its simplicity and its ability to measure forces between cells without requiring a separate theory or a calibration against an external standard and without requiring the use of a solid surface.     

Evaluation of an automated DNA sequencing system developed in RIKEN

For the advancement of Human Genome Project, we have developed an automated DNA sequencing system HUGA-I. It is composed of several automated instruments and transfer robots connecting them. In this paper we describe the results of the performance evaluation test of HUGA-I. Although some of the system units showed good performances, the total performance of the HUGA-I was about 1/6 of the designed value. By revealing principal reasons of this poor performance, we would like to contribute to the automation in genome analysis, particularly in human genome analysis.Since the sequence technology advanced remarkably in these years, the system units of HUGA-I become older than those which are now commercially available and the throughput of it is out of our expectations. Nevertheless, we believe that it is meaningful to introduce the exact performance of HUGA-I and present the bottle neck points in the automating sequencing processes. Because, automation in the gene analysis is ultimately important, in particular for the analysis of large genomes such as the human genome. The aims of this paper are to introduce the results in performance evaluation of HUGA-I and to elucidate the bottle neck points in the automation of sequencing processes.The authors express their sincere thanks to Mr. Morisada Hayakawa and Mrs. Nobuko Kato for their technical asistance.     

The effects of tick numbers and intervals between infestations on the resistance acquired by guinea-pigs to adults of Rhipicephalus evertsi evertsi (Acari: Ixodidae)

Guinea-pigs were infested three times at short (1 week) intervals or long (10 week) intervals between successive infestations with low (1), medium (8) and high (15) numbers of adult Rhipicephalus evertsi evertsi. To compare the resistance developed by the hosts at short and long intervals between infestations, a challenge (fourth) infestation was performed with the high number of ticks. Resistance was assessed by comparing the mean weight of engorged female ticks that dropped from the hosts. Concentrations of beta globulins in the host sera were also monitored. Different tick Ioads (low, medium and high) and infestation intervals had a similar influence on the reduction in weight of the females which was between 60–70% after the final challenge. However, the concentration of beta globulins, was highest in the guinea-pigs exposed to medium and high numbers of ticks with long infestation intervals, probably because of an increase in the production of protective antibodies in response to more intensive antigenic challenge. The relationship between engorgement weight and beta globulin levels in host sera is discussed.     

Direct high-level secretion into the culture medium of tuna growth hormone in biologically active form byBacillus brevis

The characteristic features of theBacillus brevis system developed by us are very high productivity of heterologous proteins and very low extracellular proteinase activity. However, the production level of eucaryotic proteins with this system was generally one or two orders of magnitude lower than that of bacterial proteins. Therefore, we have explored methods for increasing the production efficiency as to animal proteins. Signal peptide modification was found to be very effective for high-level secretion of tuna growth hormone (tGH). Modification of the signal peptide with higher basicity in the amino terminal region and higher hydrophobicity in the middle region brought about a ten-fold increase in tGH production. Further elevation of the tGH yield to 240 mg/l was achieved by using a low proteinase mutant and a stable plasmid, and by culturingB. brevis under optimal conditions with the addition of some chemicals. Thus, biologically active tGH can be efficiently produced directly in the medium with thisB. brevis system.