cDNA approaches to isolation of the mouse mutant weaver gene

The mouse autosomal recessive mutant gene weaver (wv) results in abnormalities in cerebellum, substantia nigra and testis. Although a subtracted cDNA library prepared by removing P31 (wv/wv) sequences from a P1 (wv/+) library should contain mainly nonrepetitive neonatal sequences, unfortunately, repetitive sequences still appear during screening. Two clones, one repetitive, the other not, are used to illustrate the problems encountered in attempting to isolate the weaver gene from a subtracted cDNA library.Special issue dedicated to Dr. Sidney Ochs.     

Polyunsaturated hydrocarbons in the hemolymph: biosynthetic precursors of epoxy pheromones of geometrid and arctiid moths

Female moths of many species in Geometridae, Arctiidae and some other macrolepidopteran families produce epoxy pheromones, which are probably derived from polyunsaturated hydrocarbons. In order to understand a biosynthetic site, hemolymph from both sexes of two geometrid species, Ascotis selenaria cretacea and Hemerophila artilineata, and one arctiid species, Spilosoma imparilis, was shaken with n-hexane and the solvent extracts were analyzed by GC-MS. Each extract of the female hemolymph sex-specifically included polyunsaturated hydrocarbons corresponding to the pheromonal epoxy components in addition to many saturated hydrocarbons, but no epoxy compounds were detected in it. Based on this analysis, deuterated polyunsaturated hydrocarbons were injected into the abdomens of two geometrid females, and the labeled epoxy components were successfully yielded from the pheromone glands. This result indicated that the polyunsaturated hydrocarbons occurring in the female hemolymph were direct pheromone precursors, which might be produced outside the pheromone gland, probably in oenocytes associated with abdominal epidermal cells or in the fat body, and transported to the pheromone gland via the hemolymph for their epoxydation and emission into the atmosphere.     

Determination of an Optimal Standardized Uptake Value of Fluorodeoxyglucose for Positron Emission Tomography Imaging to Assess Pathological Volumes of Cervical Cancer: A Prospective Study

Purpose

To determine the optimal standardized uptake value (SUV) of ¹⁸F-fluorodeoxyglucose (¹⁸F-FDG) for positron emission tomography (PET) imaging, at which the PET-defined gross tumor volume (GTV_PET) best matches with the pathological volume (GTV_PATH) in the cervical cancer.

Materials and Methods

Ten patients with the cervical cancer who underwent surgery were enrolled in this study. The excised specimens were processed for whole-mount serial sections and H-E staining. The tumor borders were outlined in sections under a microscope, histopathological images were scanned and the GTV_PATH calculated. The GTV_PET was delineated automatically by using various percentages relative to the maximal SUV and absolute SUV. The optimal threshold SUV was further obtained as the value at which the GTV_PET best matched with the GTV_PATH.

Results

An average of 85±10% shrinkage of tissue was observed after the formalin fixation. The GTV_PATH was 13.38±2.80 cm³ on average. The optimal threshold on percentile SUV and absolute SUV were 40.50%±3.16% and 7.45±1.10, respectively. The correlation analysis showed that the optimal percentile SUV threshold was inversely correlated with GTV_PATH (p<0.05) and tumor diameter (p<0.05). The absolute SUV was also positively correlated with SUV_max (p<0.05).

Conclusion

The pathological volume could provide the more accurate tumor volume. The optimal SUV of FDG for PET imaging by use of GTV_PATH as standard for cervical cancer target volume delineation was thus determined in this study, and more cases are being evaluated to substantiate this conclusion.     

Trehalose Maintains Bioactivity and Promotes Sustained Release of BMP-2 from Lyophilized CDHA Scaffolds for Enhanced Osteogenesis In Vitro and In Vivo

Calcium phosphate (Ca-P) scaffolds have been widely employed as a supportive matrix and delivery system for bone tissue engineering. Previous studies using osteoinductive growth factors loaded Ca-P scaffolds via passive adsorption often experience issues associated with easy inactivation and uncontrolled release. In present study, a new delivery system was fabricated using bone morphogenetic protein-2 (BMP-2) loaded calcium-deficient hydroxyapatite (CDHA) scaffold by lyophilization with addition of trehalose. The in vitro osteogenesis effects of this formulation were compared with lyophilized BMP-2/CDHA construct without trehalose and absorbed BMP-2/CDHA constructs with or without trehalose. The release characteristics and alkaline phosphatase (ALP) activity analyses showed that addition of trehalose could sufficiently protect BMP-2 bioactivity during lyophilization and achieve sustained BMP-2 release from lyophilized CDHA construct in vitro and in vivo. However, absorbed BMP-2/CDHA constructs with or without trehalose showed similar BMP-2 bioactivity and presented a burst release. Quantitative real-time PCR (RT-qPCR) and enzyme-linked immunosorbent assay (ELISA) demonstrated that lyophilized BMP-2/CDHA construct with trehalose (lyo-tre-BMP-2) promoted osteogenic differentiation of bone marrow stromal cells (bMSCs) significantly and this formulation could preserve over 70% protein bioactivity after 5 weeks storage at 25°C. Micro-computed tomography, histological and fluorescent labeling analyses further demonstrated that lyo-tre-BMP-2 formulation combined with bMSCs led to the most percentage of new bone volume (38.79% ±5.32%) and area (40.71% ±7.14%) as well as the most percentage of fluorochrome stained bone area (alizarin red S: 2.64% ±0.44%, calcein: 6.08% ±1.37%) and mineral apposition rate (4.13±0.62 µm/day) in critical-sized rat cranial defects healing. Biomechanical tests also indicated the maximum stiffness (118.17±15.02 Mpa) and load of fracture (144.67±16.13 N). These results lay a potential framework for future study by using trehalose to preserve growth factor bioactivity and optimize release profile of Ca-P based delivery system for enhanced bone regeneration.     

Enhanced aerobic granulation and nitrogen removal by the addition of zeolite powder in a sequencing batch reactor

The aim of this study was to evaluate the impact of zeolite powders on feasibility of rapid aerobic granulation in the column-type sequencing batch reactors. After 90 days' operation, aerobic granular sludge was formed in both reactors by altering influent chemical oxygen demand/nitrogen (COD/N) ratios. R1 with zeolite powders had better removal capabilities of COD and total nitrogen than R2, which was without zeolite powders. Mixed liquor volatile suspended solid concentrations of the two reactors were 7.36 and 5.45 g/L, while sludge volume index (SVI₃₀) values were 34.9 and 47.9 mg/L, respectively. The mean diameters of aerobic granular sludge in the above two reactors were 2.5 and 1.5 mm, respectively. Both reactors achieved the largest simultaneous nitrification and denitrification (SND) efficiency at an influent COD/N ratio of 8; however, R1 exhibited more excellent SND efficiency than R2. The obtained results could provide a novel technique for rapid aerobic granulation and N removal simultaneously, especially when treating nitrogen-rich industrial wastewater.     

琥珀酸脱氢酶或琥珀酰辅酶A合成酶缺失促进大肠杆菌积累5-氨基乙酰丙酸

5-氨基乙酰丙酸 (ALA) 是生物体内四吡咯类化合物的合成前体,在农业及医药领域应用广泛,是极具开发价值的高附加值生物基化学品。目前利用外源C4途径的重组大肠杆菌发酵生产ALA的研究主要利用LB培养基并添加葡萄糖和琥珀酸、甘氨酸等合成前体,成本较高。琥珀酸在C4途径中以琥珀酰辅酶A的形式直接参与ALA的合成。文中在以葡萄糖为主要碳源的无机盐培养基中研究了琥珀酰辅酶A下游代谢途径琥珀酸脱氢酶编码基因sdhAB和琥珀酰辅酶A合成酶编码基因sucCD缺失对ALA积累的影响。与仅表达异源ALA合成酶的对照菌株相比,sdhAB和sucCD缺失菌株ALA的产量分别提高了25.59%和12.40%,且ALA的积累不依赖于琥珀酸的添加和LB培养基的使用,从而大幅降低了生产成本,显示出良好的工业应用前景。     

Responses of photosynthetic properties and chloroplast ultrastructure of Bryum argenteum from a desert biological soil crust to elevated ultraviolet‐B radiation

Our understanding of plant responses to enhanced ultraviolet‐B (UV‐B) radiation has improved over recent decades. However, research on cryptogams is scarce and it remains controversial whether UV‐B radiation causes changes in physiology related to photosynthesis. To investigate the effects of supplementary UV‐B radiation on photosynthesis and chloroplast ultrastructure in Bryum argenteum Hedw., specimens were cultured for 10 days under four UV‐B treatments (2.75, 3.08, 3.25 and 3.41 W m^–2), simulating depletion of 0% (control), 6%, 9% and 12% of stratospheric ozone at the latitude of Shapotou, a temperate desert area of northwest China. Analyses showed malondialdehyde content significantly increased, whereas chlorophyll (Chl) fluorescence parameters and Chl contents decreased with increased UV‐B intensity. These results corresponded with changes in thylakoid protein complexes and chloroplast ultrastructure. Overall, enhanced UV‐B radiation leads to significant decreases in photosynthetic function and serious destruction of the chloroplast ultrastructure of B. argenteum. The degree of negative influences increased with the intensity of UV‐B radiation. These results may not only provide a potential mechanism for supplemental UV‐B effects on photosynthesis of moss crust, but also establish a theoretical basis for further studies of adaptation and response mechanisms of desert ecosystems under future ozone depletion.     

宁夏云雾山典型草原灌丛化过程中植被和土壤演变特征

干旱半干旱区灌木、半灌木等木本植物的分布面积持续增加(灌丛化)显著改变了原有植被景观及生态过程,但缺乏对长期封育过程中灌木物种取代草本物种进而影响草地群落组成、结构和功能的研究。为揭示长期封育措施下典型草原灌丛化特征及地上/地下植物群落的响应规律,研究通过对宁夏云雾山典型草原同一封育草地不同时间(2010年、2016年、2021年)植物群落(物种重要值、丰富度、多样性和生物量)和土壤特性(土壤容重、土壤水分及储水量、养分、pH)的定点观测,探讨了长期封育过程中灌木物种矮脚锦鸡儿(Caragana brachypoda)驱动的植被和土壤特性变化。结果表明,(1)灌木矮脚锦鸡儿已经取代草本植物成为封育草地的优势种,群落中灌木生物量、总生物量以及盖度、高度显著增加,但对植物密度的影响较小;(2)灌丛化过程中草地群落Patrick丰富度指数、Simpson优势度指数和Shannon-Wiener多样性指数显著降低,而Pielou均匀度指数显著增加;(3)灌丛化引起土壤深层(60-100 cm)容重显著增大,土层储水量随土层深度的增加呈先减少后增加的趋势;(4)灌丛化使得土壤有机碳含量在浅层(0...     

Characterization of cell viability during bioprinting processes

Bioprinting is an emerging technology in the field of tissue engineering and regenerative medicine. The process consists of simultaneous deposition of cells, biomaterial and/or growth factors under pressure through a micro-scale nozzle. Cell viability can be controlled by varying the parameters like pressure and nozzle diameter. The process itself can be a very useful tool for evaluating an in vitro cell injury model. It is essential to understand the cell responses to process-induced mechanical disturbances because they alter cell morphology and function. We carried out analysis and quantification of the degree of cell injury induced by bioprinting process. A parametric study with different process parameters was conducted to analyze and quantify cell injury as well as to optimize the parameters for printing viable cells. A phenomenological model was developed correlating the percentage of live, apoptotic and necrotic cells to the process parameters. This study incorporates an analytical formulation to predict the cell viability through the system as a function of the maximum shear stress in the system. The study shows that dispensing pressure has a more significant effect on cell viability than the nozzle diameter. The percentage of live cells is reduced significantly (by 38.75%) when constructs are printed at 40 psi compared to those printed at 5 psi.