Caesalpanins A–C,Three Dimeric Cassane Diterpenoids from the Seeds of Caesalpinia sappan L.

Three dimeric cassane diterpenoids, caesalpanins A–C, were isolated from the seeds of Caesalpinia sappan L., as well as three known compounds. Their structures were determined via analysis of 1D‐, 2D‐NMR, and HR‐ESI‐MS data. Caesalpanins A and B were the second and third compounds that presented a nitrogen‐containing cassane diterpenoid dimer linked through one ether bond between C‐19 and C‐20′. Caesalpanin B exhibited moderate cytotoxic activity against MCF‐7 cell lines with IC₅₀ value of 29.98 μm . Caesalpanins A and B had weak inhibitory effects against LPS‐induced nitric oxide (NO) production in RAW 264.7 macrophages at 50 μm with inhibitory rate of 36.01 % and 32.93 %, respectively.     

Protective Antioxidant Effects of Amentoflavone and Total Flavonoids from Hedyotis diffusa on H2O2‐Induced HL‐O2 Cells through ASK1/p38 MAPK Pathway

In this study, total flavonoids and total triterpenoid acid were extracted with ethyl acetate from Hedyotis diffusa Willd, and hepatoprotective activities of them and five compounds from total flavonoids against H₂O₂ induced hepatocyte damage on HL‐02 cells were determined. In particular, amentoflavone and total flavonoids had influence on the leakage of ALT, AST, LDH, the activities of SOD and the content of MDA. They effectively reduced the loss of MMP, the release of Cyt C, and then inhibited activation of caspase‐3/caspase‐9 cascade in hepatotoxic cells. The contents of ROS were significantly reduced to inhibit p38 in amentoflavone and flavonoids groups which decreased ASK1 and p‐p38 levels through increasing thioredoxin Trx1 and reductase TrxR1. These results suggesting that the antioxidant protection of amentoflavone and flavonoids might be reducing ROS to inhibit the H₂O₂‐induced upstream of pathway via increasing levels of Trx1 and TrxR1, which were pivotal in blocking the down streaming effectors of ASK1/p38 MAPK pathway and alleviating hepatotoxicity.     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

Femtosecond Laser‐Etched MXene Microsupercapacitors with Double‐Side Configuration via Arbitrary On‐ and Through‐Substrate Connections

The capacitance of microsupercapacitors (MSCs) can double if both sides of substrates are used to construct MSCs. Nevertheless, achieving electric connections of MSCs through substrates is a challenge due to the difficulty in precisely positioning each MSC couple that has two of the same MSCs units on two sides. In this work, taking advantage of the synchronous etching on both sides of transparent polyethylene terephthalate substrates by femtosecond laser pulses, a double‐sided configuration is attained with high precision in the alignment of back‐to‐back MSC couples and versatile double‐side MSCs are realized via arbitrary on‐ and through‐substrate connections of MXene MSC units. The MXene double‐side MSC fabricated by the series connection of 12 spiral pattern MXene MSC units with interdigital electrodes of 10 μm width interspace can output a large working voltage of 7.2 V. Additionally, femtosecond laser etching brings the transformation of MXene into titania near‐etched edges with a lateral distance less than 1 µm. Such a small laser‐affected area has little influence on the capacitive performance, which is one of advantages for femtosecond laser over conventional lasers. This research is valuable for one‐step manufacturing of highly integrated MSCs in the field of miniaturized energy storage systems.     

Accessing the Two‐Electron Charge Storage Capacity of MnO2 in Mild Aqueous Electrolytes

Rechargeable batteries based on MnO₂ cathodes, able to operate in mild aqueous electrolytes, have attracted attention due to their appealing features for the design of low‐cost stationary energy storage devices. However, the charge/discharge mechanism of MnO₂ in such media is still a matter of debate. Here, an in‐depth quantitative spectroelectrochemical analysis of MnO₂ thin‐films provides a set of unrivaled mechanistic insights. A major finding is that charge storage occurs through the reversible two‐electron faradaic conversion of MnO₂ into Mn²⁺ in the presence of a wide range of weak Brønsted acids, including the [Zn(H₂O)₆]²⁺ or [Mn(H₂O)₆]²⁺ complexes present in aqueous Zn/MnO₂ batteries. Furthermore, it is shown that buffered electrolytes loaded with Mn²⁺ are ideal to achieve highly reversible conversion of MnO₂ with both high gravimetric capacity and remarkably stable charging/discharging potentials. In the most favorable case, a record gravimetric capacity of 450 mA·h·g^?1 is obtained at a high rate of 1.6 A·g^?1, with a Coulombic efficiency close to 100% and a MnO₂ utilization of 84%. Overall, the present results challenge the common view on MnO₂ the charge storage mechanism in mild aqueous electrolytes and underline the benefit of buffered electrolytes for high‐performance rechargeable aqueous batteries.     

High‐Efficiency CsPbI2Br Perovskite Solar Cells with Dopant‐Free Poly(3‐hexylthiophene) Hole Transporting Layers

CsPbI₂Br is emerging as a promising all‐inorganic material for perovskite solar cells (PSCs) due to its more stable lattice structure and moisture resistance compared to CsPbI₃, although its device performance is still much behind this counterpart. Herein, a preannealing process is developed and systematically investigated to achieve high‐quality CsPbI₂Br films by regulating the nucleation and crystallization of perovskite. The preannealing temperature and time are specifically optimized for a dopant‐free poly(3‐hexylthiophene) (P3HT)‐based device to target dopant‐induced drastic performance degradation for spiro‐OMeTAD‐based devices. The resulting P3HT‐based device exhibits comparable power conversion efficiency (PCE) to spiro‐OMeTAD‐based devices but much enhanced ambient stability with over 95% PCE after 1300 h. A diphenylamine derivative is introduced as a buffer layer to improve the energy‐level mismatch between CsPbI₂Br and P3HT. A record‐high PCE of 15.50% for dopant‐free P3HT‐based CsPbI₂Br PSCs is achieved by alleviating the open‐circuit voltage loss with the buffer layer. These results demonstrate that the preannealing processing together with a suitable buffer layer are applicable strategies for developing dopant‐free P3HT PSCs with high efficiency and stability.     

High‐Voltage‐Driven Surface Structuring and Electrochemical Stabilization of Ni‐Rich Layered Cathode Materials for Li Rechargeable Batteries

Layered lithium–nickel–cobalt–manganese oxide (NCM) materials have emerged as promising alternative cathode materials owing to their high energy density and electrochemical stability. Although high reversible capacity has been achieved for Ni‐rich NCM materials when charged beyond 4.2 V versus Li⁺/Li, full lithium utilization is hindered by the pronounced structural degradation and electrolyte decomposition. Herein, the unexpected realization of sustained working voltage as well as improved electrochemical performance upon electrochemical cycling at a high operating voltage of 4.9 V in the Ni‐rich NCM LiNi_0.895Co_0.085Mn_0.02O₂ is presented. The improved electrochemical performance at a high working voltage at 4.9 V is attributed to the removal of the resistive Ni²⁺O rock‐salt surface layer, which stabilizes the voltage profile and improves retention of the energy density during electrochemical cycling. The manifestation of the layered Ni²⁺O rock‐salt phase along with the structural evolution related to the metal dissolution are probed using in situ X‐ray diffraction, neutron diffraction, transmission electron microscopy, and X‐ray absorption spectroscopy. The findings help unravel the structural complexities associated with high working voltages and offer insight for the design of advanced battery materials, enabling the realization of fully reversible lithium extraction in Ni‐rich NCM materials.