The pollination of Habenaria rhodocheila (Orchidaceae) in South China: When butterflies take sides

Habenaria is one of the largest terrestrial genera in the family Orchidaceae. Most field studies on Habenaria species with greenish–white and nocturnal scented flowers are pollinated by nocturnal hawkmoths and settling moths. However, H. rhodocheila presents reddish flowers lacking a detectable scent and fails to fit the moth pollination syndrome. We investigated the pollinators, breeding system, and functional traits of H. rhodocheila in South China and found that two diurnal swallowtail butterflies Papilio helenus and Papilio nephelus (Papilionidae) were the effective pollinators. When butterflies foraged for nectar in the spur, the pollinia became attached between the palpi. A triangular projected median rostellar lobe was found at the entrance (sinus) of the spur of H. rhodocheila. This lobe divided the spur opening into two entrances forcing butterflies to enter their proboscides through the left or right side. When the projection of median rostellar lobe was removed, the site of pollinium attachment changed to the eyes of the butterflies, leading to a higher rate of pollinium removal but lower rate of pollinium deposition. Our quartz glass cylinder choice experiment suggested that visual rather than olfactory cues provided the major stimuli for butterflies to locate these flowers. Hand pollination experiments suggested this species was self‐compatible but pollinator‐dependent. However, the proportion of seeds with large embryos produced in self‐pollinated fruits was significantly lower than in cross‐pollinated fruits, indicating a significant inbreeding depression. Unlike many other orchid species, fruit set was higher than rates of pollinium removal, indicating a high level of pollination efficiency in a species with friable pollinia. Shifts from moth to butterfly pollination in the genus Habenaria parallel other orchid lineages providing insights into the potential for pollinator‐mediated floral trait selection.     

畜禽钙磷和微量元素营养研究进展

矿物元素在畜禽生长发育、新陈代谢、神经活动、免疫功能、内分泌等几乎所有的生命活动过程中都发挥着重要的生理作用,分为钙、磷、钠、镁等常量元素和铁、锰、钴、铜等微量元素。某种矿物元素摄入不足或在体内过量蓄积、矿物元素间比例失调,都将引起严重后果。随着畜禽养殖业的集约化规模化发展,饲用矿物元素用量迅速增加,但存在不合理使用的情况,造成了资源浪费和环境污染。因此,在满足畜禽营养需要量的前提下,合理地使用矿物元素剂型及剂量,实现降低矿物元素经畜禽粪污向环境中的排放量,不仅利于集约化畜禽养殖业的发展,同时也能有效降低畜禽粪污中的重金属含量,为种植业提供优良的有机肥来源,维护生态系统的平衡,促进种植业和养殖业的可持续健康发展。基于此,以畜禽体内含量最高的常量元素钙磷和微量元素为切入点,介绍了饲用矿物元素的应用现状、畜禽矿物元素基础需要量及合适的添加范围,着重综述了新型饲用微量元素的开发与应用进展,并探讨了矿物元素动态饲喂模式的可行性及有效性,以期为合理利用矿物元素资源及进一步解决全球生态农业研究的畜禽矿物元素导致的环境污染提供参考。     

The inhibitory effect of Ca2+ on the flavonoid production of Tetrastigma hemsleyanum suspension cells induced by metal elicitors

Tetrastigma hemsleyanum suspension cells were treated with four metal salts to screen suitable elicitors for the promotion of plant cell biomass and flavonoid production. The effects of calcium ions (Ca²⁺) on induction were also studied. It was found that the most effective elicitors were 50 μM of the heavy metal ion copper (Cu²⁺) and 100 μM of the rare earth element cerium (Ce³⁺). The maximal biomass levels under respective treatments over a 16-d culture period increased by 1.3- and 1.6-fold, and the total flavonoid content was 1.8- and 1.6-fold greater than the control, respectively. Reducing the exogenous Ca²⁺ concentration or adding Ca²⁺ antagonists (1 mM ethylene glycol-bis(2-aminoethylether)-N,N,N′,N-tetraacetc acid (EGTA) or 1 mM verapamil) strengthened inductive effects of metal elicitors and enhanced flavonoid production. However, 0.5 μM of the calcium ionophore A23187 showed contrary results. The increase in exogenous Ca²⁺ concentration in the presence of A23187 suppressed H₂O₂ bursts and peroxidase activity caused by metal elicitors. The results suggest that Ca²⁺ plays an inhibitory role in the plant cell response to metal elicitors. This suppression could have been caused by Ca²⁺ preventing the cells from absorbing metal ions and then easing the induction, or because the decrease of Ca²⁺ concentration worked as an induction signal. Therefore, reducing the Ca²⁺ concentration in culture medium, or adding Ca²⁺ antagonists could be used to improve flavonoid production and cell growth in combination with induction by metal elicitors during in vitro culture of T. hemsleyanum suspension cells.     

甲基营养菌MP688萄糖脱氢酶基因分离鉴定及性质研究

目的：鉴定甲基营养菌MP688中的葡萄糖脱氢酶基因。方法：对甲基营养菌MP688基因组序列进行比对和分析,找到与已知细菌葡萄糖脱氢酶同源性最高的基因序列mpq_2164,且该基因所编码蛋白经分析具有跨膜结构域。设计51物扩增mpq_2164和缺失跨膜区域序列的s-mpq_2164,将PCR产物克隆到表达载雄pET-15b上,在大肠杆菌BL21中完成异源重组表达,然后通过组氨酸标签镍柱亲和层析纯化,采用DCIP法测定葡萄糖脱氢酶的活力。结果：分离了甲基营养菌MP688中的葡糖糖脱氢酶基因,并实现了s-mpq_2164的高效异源重组表达;MPQ2164的氯基酸序列与已知的葡萄糖脱氢酶相似性很低,但酶活测定结果表明S-MPQ-2164具有很高的葡糖糖脱氢酶活性。结论：MPQ_2164是-个依赖于吡咯喹啉醌的葡萄糖脱氢酶,去掉跨膜结构域有利于该蛋白的异源嘉{大,     

MicroRNA-409-3p inhibits migration and invasion of bladder cancer cells via targeting c-Met

There is increasing evidence suggesting that dysregulation of certain microRNAs (miRNAs) may contribute to tumor progression and metastasis. Previous studies have shown that miR-409-3p is dysregulated in some malignancies, but its role in bladder cancer is still unknown. Here, we find that miR-409-3p is down-regulated in human bladder cancer tissues and cell lines. Enforced expression of miR-409-3p in bladder cancer cells significantly reduced their migration and invasion without affecting cell viability. Bioinformatics analysis identified the pro-metastatic gene c-Met as a potential miR-409-3p target. Further studies indicated that miR-409-3p suppressed the expression of c-Met by binding to its 3′-untranslated region. Silencing of c-Met by small interfering RNAs phenocopied the effects of miR-409-3p overexpression, whereas restoration of c-Met in bladder cancer cells bladder cancer cells overexpressing miR-409-3p, partially reversed the suppressive effects of miR-409-3p. We further showed that MMP2 and MMP9 may be downstream effector proteins of miR-409-3p. These findings indicate that miR-409-3p could be a potential tumor suppressor in bladder cancer.     

From Legal Transplants to Sustainable Transition

Extended producer responsibility (EPR), which assigns significant responsibility to producers to take back their end‐of‐life products to create incentives for redesign of products with lower life cycle environmental impacts, has come to a crossroad facing a trade‐off between the original innovation‐oriented regime design and the cost‐efficiency challenges in practice. This is particularly true in its implementation in non‐Organization for Economic Co‐operation and Development (OECD) countries as they are trying to transplant the “best practices” from OECD countries, for there is increasing skepticism as to whether EPR is suitable for developing countries at all. As an important producer of electronic products and destination of electronic waste (e‐waste) flows in the world, China has been expected to play a vital role in the evolution of global governance based on the idea of EPR, either to create new ways for producers to perform their end‐of‐life strategies, or to reshape the mode of production and consumption with its fast‐growing market. However, the establishment of EPR in China has been long and full of difficulties. This article reviews the status and trends in the establishment of an EPR system for waste electrical and electronic equipment (WEEE) management in China. We use the framework of a multilevel perspective of transition theory in our analysis to characterize the complex interactions among various agents in the evolution of the Chinese system from initial innovation‐oriented design to the current efficiency‐oriented version. An ongoing research framework for evaluation of the EPR program in China is outlined as the research agenda in coming years.     

Surface Properties and Corrosion Behavior of Co–Cr Alloy Fabricated with Selective Laser Melting Technique

We sought to study the corrosion behavior and surface properties of a commercial cobalt–chromium (Co–Cr) alloy which was fabricated with selective laser melting (SLM) technique. For this purpose, specimens were fabricated using different techniques, such as SLM system and casting methods. Surface hardness testing, microstructure observation, surface analysis using X-ray photoelectron spectroscopy (XPS) and electrochemical corrosion test were carried out to evaluate the corrosion properties and surface properties of the specimens. We found that microstructure of SLM specimens was more homogeneous than that of cast specimens. The mean surface hardness values of SLM and cast specimens were 458.3 and 384.8, respectively; SLM specimens showed higher values than cast ones in hardness. Both specimens exhibited no differences in their electrochemical corrosion properties in the artificial saliva through potentiodynamic curves and EIS, and no significant difference via XPS. Therefore, we concluded that within the scope of this study, SLM-fabricated restorations revealed good surface properties, such as proper hardness, homogeneous microstructure, and also showed sufficient corrosion resistance which could meet the needs of dental clinics.