Import of human bifunctional enzyme into peroxisomes of human hepatoma cells in vitro.

A polypeptide containing the carboxyl-terminal fragment of human peroxisomal enoyl-CoA hydratase:3-hydroxyacyl-CoA dehydrogenase bifunctional enzyme was synthesized in vitro from its cDNA clone. This expression polypeptide was transported into purified rat liver peroxisomes. When the expression polypeptide was incubated with postnuclear supernatant fractions of human hepatoma cells and analyzed by Nycodenz gradient SDS-PAGE and fluorography, it was imported specifically into peroxisomes as indicated by its resistance to proteinase K degradation. A deletion of the last nine amino acid residues at the carboxyl-terminus of this polypeptide prevents its peroxisomal import. A tripeptide sequence, SKL, located at the carboxyl-terminus of human bifunctional enzyme appears to be the targeting signal for the peroxisomal importation of bifunctional enzyme in human cells.     

Improved power generation using nitrogen-doped 3D graphite foam anodes in microbial fuel cells

Bioprocess and Biosystems Engineering - The properties of the anode material and structure are critical to the microbial growth and interfacial electron transfer between the biofilm and the anode....     

高寒草甸植物物候对温度变化的响应

植物物候是植物为适应其生长环境而呈现的规律性变化,是气候变化的指示器。为了解高寒植物物候对温度变化的响应,利用1997—2010年青海湖海北高寒草原生态监测站群落优势种矮嵩草物候观测资料和同时段的气象资料,应用偏最小二乘(PLS)回归定量分析了植物物候期变化特征、趋势及其与气温间的相互关系。结果表明:①1997—2010年青海湖地区年均温度总体上升,倾向率为0.5℃/10a,其中年均最高温度和最低温度呈现出非对称型变化,最低温度显著升高且高于年均温升幅,倾向率为0.7℃/10a(P0.05),而年均最高温度无明显变化。②1997—2010年间,矮嵩草平均返青期和枯黄期分别为4月18日和10月2日,矮嵩草返青期推迟,枯黄期提前,生长季长度缩短。③影响矮嵩草返青的关键时期为每年的1月和3—4月,1月温度升高影响植物休眠进程进而延迟返青,而3—4月温度升高有利于热量积累使返青提前;影响矮嵩草枯黄的关键时期为7月上中旬和8月,期间温度升高使枯黄期提前。④根据PLS分析和相关分析,最低温度在各关键时期内显著影响植物物候,而最高温度仅在8月对枯黄期影响通过显著性检验,因此最低温度是影响高寒草地矮嵩草物候期的关键因子。     

Phosphorene as Cathode Material for High‐Voltage,Anti‐Self‐Discharge Zinc Ion Hybrid Capacitors

Output voltage and self‐discharge rate are two important performance indices for supercapacitors, which have long been overlooked, though these play a very significant role in their practical application. Here, a zinc anode is used to construct a zinc ion hybrid capacitor. Expanded operating voltage of the hybrid capacitor is obtained with novel electrolytes. In addition, significantly improved anti‐self‐discharge ability is achieved. The phosphorene‐based zinc ion capacitor exploiting a “water in salt” electrolyte with a working potential can reach 2.2 V, delivering 214.3 F g^?1 after 5000 cycles. The operating voltage is further extended to 2.5 V through the use of an organic solvent as the electrolyte; the solvent is prepared by adding 0.2 m ZnCl₂ into the tetraethylammonium tetrafluoroborate in propylene carbonate (Et₄NBF₄/PC) solvent, and it exhibits 105.9 F g^?1 even after 9500 cycles. More importantly, the phosphorene‐based capacitors possess excellent anti‐self‐discharge performance. The capacitors retain 76.16% of capacitance after resting for 300 h. The practical application of the zinc ion capacitor is demonstrated through a flexible paper‐based printed microcapacitor. It is believed that the developed zinc ion capacitor can effectively resolve the severe self‐discharge problem of supercapacitors. Moreover, high‐voltage zinc ion capacitors provide more opportunities for the application of supercapacitors.     

Three‐dimensional ring‐oven washing technique for a paper‐based immunodevice

Washing is a standard step for enzyme‐linked immunosorbent assays (ELISA) performed on a paper‐based chip, in which nonspecific‐binding antibodies and antigens should be removed completely from the paper surface. In this study, a novel three‐dimensional (3D) washing strategy using a heating ring‐oven was carried out on a paper‐based chip. Compared with a plane washing mode by a ring‐oven, this 3D washing strategy obtained a lower background, as gravity played an important role in the washing step. The paper‐based chip was placed on a 3D plastic holder and the waste area was connected to a heating ring. Use of a heating waste area meant that the nonspecific‐binding protein was continuously carried to the waste area through gravity and capillary action. The angle between the plastic holder and the ring plane was carefully selected. The effect of washing on different parts of the detection area was investigated by upconversion fluorescence and chemiluminescence (CL). This novel 3D washing strategy was performed for carcinoembryonic antigen detection through CL and a lower detection limit of 2 pg ml^?1 was obtained. This approach provides an effective washing strategy to remove nonspecific‐binding antibody from a paper‐based immunodevice.     

Oxidative Modification of Cysteine 111 Promotes Disulfide Bond-Independent Aggregation of SOD1

Converging evidence indicates that SOD1 aggregation is a common feature of mutant SOD1-linked fALS, and seems to be directly related to the gain-of-function toxic property. However, the mechanism inducing the aggregation is not understood. To study the contribution of oxidative modification of cysteine residues in SOD1 aggregation, we systematically examined the redox state of SOD1 cysteine residues in the G37R transgenic mouse model at different stages of the disease and under oxidative stress induced by H₂O₂. Our data suggest that under normal circumstance, cysteine 111 residue in SOD1 is free; however, under oxidative stress, it is prone to oxidative modification by providing the thiolate anion (S−). With the progression of the disease, increased levels of oxidative insults facilitated the oxidation of thiol groups of cysteine residues; human mutant SOD1 could generate an upper shift band in reducing SDS-PAGE, which turned out to be a Cys111-peroxidized SOD1 species. We also detected the formation of SOD1 multimers at different stages of the disease, and found that accumulated oxidative stress facilitated the formation of aggregates, which were not mediated by disulfide bond. This oxidative modification of cysteine 111 therefore promotes the formation of disulfide bond-independent aggregation of SOD1.     

Up-regulation of Cavβ3 subunit in primary sensory neurons increases voltage-activated Ca2+ channel activity and nociceptive input in neuropathic pain

High voltage-activated calcium channels (HVACCs) are essential for synaptic and nociceptive transmission. Although blocking HVACCs can effectively reduce pain, this treatment strategy is associated with intolerable adverse effects. Neuronal HVACCs are typically composed of α(1), β (Cavβ), and α(2)δ subunits. The Cavβ subunit plays a crucial role in the membrane expression and gating properties of the pore-forming α(1) subunit. However, little is known about how nerve injury affects the expression and function of Cavβ subunits in primary sensory neurons. In this study, we found that Cavβ(3) and Cavβ(4) are the most prominent subtypes expressed in the rat dorsal root ganglion (DRG) and dorsal spinal cord. Spinal nerve ligation (SNL) in rats significantly increased mRNA and protein levels of the Cavβ(3), but not Cavβ(4), subunit in the DRG. SNL also significantly increased HVACC currents in small DRG neurons and monosynaptic excitatory postsynaptic currents of spinal dorsal horn neurons evoked from the dorsal root. Intrathecal injection of Cavβ(3)-specific siRNA significantly reduced HVACC currents in small DRG neurons and the amplitude of monosynaptic excitatory postsynaptic currents of dorsal horn neurons in SNL rats. Furthermore, intrathecal treatment with Cavβ(3)-specific siRNA normalized mechanical hyperalgesia and tactile allodynia caused by SNL but had no significant effect on the normal nociceptive threshold. Our findings provide novel evidence that increased expression of the Cavβ(3) subunit augments HVACC activity in primary sensory neurons and nociceptive input to dorsal horn neurons in neuropathic pain. Targeting the Cavβ(3) subunit at the spinal level represents an effective strategy for treating neuropathic pain.