大鼠骨骼肌损伤后中性粒细胞、巨噬细胞和肌成纤维细胞数量分析研究

目的 研究大鼠骨骼肌损伤后中性粒细胞、巨噬细胞和肌成纤维细胞数量的变化情况,为今后骨骼肌损伤修复的病理学机制研究打下坚实的基础.方法 建立大鼠骨骼肌机械性损伤动物模型,随机分为伤后6h、12h、1d、3d、7d、10d、14d及正常对照组.应用免疫组织荧光染色和免疫组织化学染色,检测大鼠骨骼肌损伤后不同时间点中性粒细胞、巨噬细胞和肌成纤维细胞的数量.结果 伤后6h-12h,损伤区可见中性粒细胞和巨噬细胞浸润,中性粒细胞数量达到高峰.伤后1d,损伤区巨噬细胞数量急剧增加,迅速达到高峰,而中性粒细胞数量开始下降.伤后3d,中性粒细胞和巨噬细胞数量都显著下降.伤后7d,肌成纤维细胞开始出现.到伤后10d-14d,损伤区主要以肌成纤维细胞为主,偶见巨噬细胞.结论 大鼠骨骼肌损伤区中性粒细胞、巨噬细胞和肌成纤维细胞数量呈时间规律性变化,以期为骨骼肌损伤修复的病理学机制研究提供参考资料.     

A highly sensitive and selective optical sensor for Pb(2+) by using conjugated polymers and label-free oligonucleotides

The detection of Pb(2+) with DNA-based biosensor is usually susceptible to severe interference from Hg(2+) because of the T-Hg(2+)-T interaction between Hg(2+) and T residues. In this study, we developed a rapid, sensitive, selective and label-free sensor for the detection of Pb(2+) in the presence of Hg(2+) based on the Pb(2+)-induced G-quadruplex formation with cationic water-soluble conjugated polymer (PMNT) as a "polymeric stain" to transduce optical signal. We selected a specific sequence oligonucleotide, TBAA (5'-GGAAGGTGTGGAAGG-3'), which can form a G-quadruplex structure upon the addition of Pb(2+). This strategy provided a promising alternative to Pb(2+) determination in the presence of Hg(2+) instead of the universal masking agents of Hg(2+) (such as CN(-), SCN(-)). Based on this observation, a simple "mix-and-detect" optical sensor for the detection of Pb(2+) was proposed due to the distinguishable optical properties of PMNT-ssDNA and PMNT-(G-quadruplex) complexes. By this method, we could identify micromolar Pb(2+) concentrations within 5min even with the naked eye. Furthermore, the detection limit was improved to the nanomolar range by the fluorometric method. We also successfully utilized this biosensor for the determination of Pb(2+) in tap water samples.     

Immunosensor based on magnetic relaxation switch and biotin-streptavidin system for the detection of Kanamycin in milk

A rapid, sensitive, and simple immunosensor was developed for the detection of Kanamycin (KM) in milk. This immunosensor is based on magnetic relaxation switch (MRS) assay and biotin-streptavidin system (B-SA system). The target analyte (KM) competed with those on the surface of the superparamagnetic iron oxide (SPIO) nanoparticles and hence affected the formation of SPIO aggregates. The dispersed and aggregated states of SPIO can modulate the spin-spin relaxation time (T(2)) of the neighboring water molecule. T(2) was then changed as an effect of the target analyte. The B-SA system was used to amplify the SPIO binding, thus enhance the sensitivity. The detection working was 1.5 to 25.2ngmL(-1) and limit of detection (LOD) was determined to be 0.1ngmL(-1). The LOD of the immunosensor decreased tenfold, and its analysis time (45min) was much shorter than that of enzyme-linked immunosorbent assay (6h to 8h). The average recoveries of the KM at various spiking levels ranged from 80.2% to 85.6% with a relative standard deviation (RSD) below 4.0%. The results showed that the MRS immunosensor was a promising platform for the determination of small molecular residues because of its high sensitivity, specificity, homogeneity, and speed.     

One-step electrochemically co-assembled redox-active [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid film for non-redox protein biosensors

A redox-active [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs (bpy=2,2'-bipyridine, tatp=1,4,8,9-tetra-aza-triphenylene, BSA=bovine serum albumin, SWCNTs=single-walled carbon nanotubes) hybrid film is fabricated on an indium-tin oxide (ITO) electrode via one-step electrochemical co-assembly approach. BSA is inherently dispersive and therefore served as the linking mediator of SWCNTs, which facilitate the redox reactions of [Ru(bpy)(2)(tatp)](2+) employed as a reporter of BSA. The evidences from differential pulse voltammetry, cyclic voltammetry, scanning electron microscope, emission spectroscopy and fluorescence microscope reveal that the [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid can be electrochemically co-assembled on the ITO electrode, showing two pairs of well-defined Ru(II)-based redox waves. Furthermore, the electrochemical co-assembly of the [Ru(bpy)(2)(tatp)](2+)-BSA-SWCNTs hybrid is found to be strongly dependent on the simultaneous presence of BSA and SWCNTs, indicating a good linear response to BSA in the range from 6 to 50mgL(-1). The results from this study provide an electrochemical co-assembly method for the development of non-redox protein biosensors.     

Needle δ13C and mobile carbohydrates in Pinus koraiensis in relation to decreased temperature and increased moisture along an elevational gradient in NE China

A tree’s crown interacts with atmospheric variables such as CO₂, temperature, and humidity. Physioecology of leaves/needles (e.g. δ¹³C, mobile carbohydrates, and nitrogen) is, therefore, strongly affected by microclimate in and surrounding a tree crown. To understand the physiological responses of leaves to changes in air temperature and moisture, we measured δ¹³C, soluble sugars, starch, and total nitrogen (N) concentrations in current year and 1-yr-old needles of Pinus koraiensis trees, and compared the growing season air temperature and relative humidity within and outside P. koraiensis crowns along an elevational gradient from 760 to 1,420 m a.s.l. on Changbai Mountain, NE China. Our results indicated that needle N and mobile carbohydrates concentrations, as well as needle δ¹³C values changed continuously with increasing elevation, corresponding to a continuous decrease in air temperature and an increase in relative humidity. Needle carbon and nitrogen status is highly significantly negatively correlated with temperature, but positively correlated with relative humidity. These results indicate that increases in air temperature in combination with decreases in relative humidity may result in lower levels of N and mobile carbohydrates in P. koraiensis trees, suggesting that future climate changes such as global warming and changes in precipitation patterns will directly influence the N and carbon physiology at P. koraiensis individual level, and indirectly affect the competitive ability, species composition, productivity and functioning at the stand and ecosystem level in NE China. Due to the relatively limited range of the transect (760–1,420 m) studied, further research is needed to explain whether the present results are applicable to scales across large elevational gradients.     

Triple mutated antibody scFv2F3 with high GPx activity: insights from MD, docking, MDFE, and MM-PBSA simulation

By combining computational design and site-directed mutagenesis, we have engineered a new catalytic ability into the antibody scFv2F3 by installing a catalytic triad (Trp²⁹–Sec⁵²–Gln⁷²). The resulting abzyme, Se-scFv2F3, exhibits a high glutathione peroxidase (GPx) activity, approaching the native enzyme activity. Activity assays and a systematic computational study were performed to investigate the effect of successive replacement of residues at positions 29, 52, and 72. The results revealed that an active site Ser⁵²/Sec substitution is critical for the GPx activity of Se-scFv2F3. In addition, Phe²⁹/Trp–Val⁷²/Gln mutations enhance the reaction rate via functional cooperation with Sec⁵². Molecular dynamics simulations showed that the designed catalytic triad is very stable and the conformational flexibility caused by Tyr¹⁰¹ occurs mainly in the loop of complementarity determining region 3. The docking studies illustrated the importance of this loop that favors the conformational shift of Tyr⁵⁴, Asn⁵⁵, and Gly⁵⁶ to stabilize substrate binding. Molecular dynamics free energy and molecular mechanics-Poisson Boltzmann surface area calculations estimated the pK _a shifts of the catalytic residue and the binding free energies of docked complexes, suggesting that dipole–dipole interactions among Trp²⁹–Sec⁵²–Gln⁷² lead to the change of free energy that promotes the residual catalytic activity and the substrate-binding capacity. The calculated results agree well with the experimental data, which should help to clarify why Se-scFv2F3 exhibits high catalytic efficiency.     

Genome-wide identification and expression profiling of ankyrin-repeat gene family in maize

Members of the ankyrin repeats (ANK) gene family encode ANK domain that are common in diverse organisms and play important roles in cell growth and development, such as cell-cell signal transduction and cell cycle regulation. Recently, genome-wide identification and evolutionary analyses of the ANK gene family have been carried out in Arabidopsis and rice. However, little is known regarding the ANK genes in the entire maize genome. In this study, we described the identification and structural characterization of 71 ANK genes in maize (ZmANK). Then, comprehensive bioinformatics analyses of ZmANK genes family were performed including phylogenetic, domain and motif analysis, chromosomal localization, intron/exon structural patterns, gene duplications and expression profiling. Domain composition analyses showed that ZmANK genes formed ten subfamilies. Five tandem duplications and 14 segmental duplications were identified in ZmANK genes. Furthermore, we took comparative analysis of the total ANK gene family in Arabidopsis, rice and maize, ZmANKs were more closely paired with OsANKs than with AtANKs. At last, expression profile analyses were performed. Forty-one members of ZmANK genes held EST sequences records. Semi-quantitative expression and microarray data analysis of these 41 ZmANK genes demonstrated that ZmANK genes exhibit a various expression pattern, suggesting that functional diversification of ZmANK genes family. The results will present significant insights to explore ANK genes expression and function in future studies in maize.     

Sequence‐independent processing site of the C‐terminal domain (CTD) influences maturation of the RgpB protease from Porphyromonas gingivalis

The Gram‐negative periodontal pathogen Porphyromonas gingivalis produces a family of outer membrane‐anchored proteases, the gingipains, shown to play an essential role in virulence of the organism. The C‐terminal domain (CTD) of gingipains and other secreted proteins is known to be the targeting signal for maturation and translocation of the protein through the outer membrane. The CTD is subsequently cleaved during the secretion process. Multiple alignment of various CTDs failed to define a consensus sequence at the putative CTD processing site. Using mutagenesis, we were able to show that cleavage at the site is not dependent on a specific residue and that recognition of the site is independent of local sequence. Interestingly, length of the junction between the CTD and adjacent Ig‐like subdomain has a critical influence on post‐translational glycan modification of the protein, whereby insertion of additional residues immediately N‐terminal to the cleavage site results in failure of glycan modification and release of soluble protease into the culture medium. Various hypotheses are presented to explain these phenomena. Knowledge of the role CTDs play in maturation of gingipains has broader application for understanding maturation of CTD homologues expressed by bacteria of the Bacteriodetes phylum.