汉防己甲素及克矽平对矽肺大鼠Ⅰ型和Ⅲ型胶原mRNA的影响

汉防己甲素（汉甲）及克矽平（Ｐｏｌｙｖｉｎｙｌｐｙｒｉｄｉｎｅ－Ｎ－Ｏｘｉｄｅ,ＰＶＮＯ）是目前较为有效的抑制矽肺纤维化的药物。本文研究了其对胶原ｍＲＮＡ水平的影响．斑点杂交实验表明大鼠接尘６０天和１２０天后α１（Ⅰ）及α１（Ⅲ）ｍＲＮＡ水平明显上升,经汉甲或克矽平治疗１个月或３个月后,胶原ｍＲＮＡ水平明显下降。原位杂交结果表明胶原ｍＲ－ＮＡ银颗粒与细胞性结节和增厚的肺泡壁的成纤维细胞分布重合。汉甲或克矽平治疗后银颗粒数下降。提示汉甲及克矽平对矽肺进程中的胶原基因表达增强有抑制作用。     

人鼻咽癌细胞基因组中瘤基因Ha－ras－1的Dnase Ⅰ超敏感位点的初步研究

ＤＮａｓｅⅠ超敏感位点的研究能够发现潜在的调控基因转录活化的位点,比较正常人外周血有核细胞,淋巴瘤细胞株Ｐ３ＨＲ１和人鼻咽癌低分化磷癌细胞株ＨＯｎＥ１和ＨＮＥ２中Ｈａ－ｒａｓ－１瘤基因的ＤＮａｓｅⅠ超敏感位点发现,只有ＨＯＮＥ１和ＨＮＥ２细胞基因组中存在一个ＤＮａｓｅⅠ超敏感位点,位于第一个外显子上游０．３７ｋｂ处,上述结果提示正常白细胞和Ｐ３ＨＲ１细胞中Ｈａ－ｒａｓ－１基因处于失活状态,而在鼻咽癌细胞基因组中则处于活化状态,它的活化可能与０．３７ｋｂ处的ＤＮＡ序列有密切的关系。     

Optimal door fitting with systematic fixture adjustment

A systematic approach is presented to obtain the best door gap quality through optimal door fitting in automobile body manufacturing. First, three indexes of gap quality are defined; they are: (1) door gap width deviation relative to design nominal; (2) door gap parallelism; and (3) car-to-car gap consistency. Then the door-fitting problem is formulated into a general constrained optimization problem. The effects of optimal door fitting on the three quality indexes are evaluated through computer simulation. These results provide a lower bound on the design of nominal door gap by considering process capability. Finally, a computer-aided fixture adjustment scheme is developed to orient a door in a body side opening to achieve the optimal fitting. The amount of adjustment, with the desired orientation obtained from optimization, is calculated based on parametrically modeled local surface features of the fixture and the door. The adequacy of door feature modeling is verified through a door-fitting experiment.     

零下低温对杂交杨树皮层膜脂组成的影响

以不耐寒的美洲黑杨（Ｐｏｐｕｌｕｓｄｅｌｔｏｉｄｅｓｃｖ．“Ｌｕｘ”Ｉ－６９／５５,父本）和耐寒性较强的欧美杨（Ｐ．ｅｕｒａｍｅｒｉｃａｎａｃｌｃｖ．Ｉ－４５／５１,母本）的４个杂交Ｆ＿１代无性系（９５杨、５５９杨、６００杨和１３８１杨）为材料,分析了零下低温寒潮前后枝条皮层的脂质组成。结果表明,寒潮影响下,皮层中磷脂含量增加而组成基本不变,膜脂脂肪酸组成的变化规律是：寒潮前脂肪酸不饱和指数（ＩＵＦＡ）值大的无性系,寒潮前后的ＩＵＦＡ值变化量小;寒潮前ＩＵＦＡ值较小的无性系,寒潮前后ＩＵＦＡ值变化量较大。本文借用力学概念,提出相对抗性概念,给出杨树无性系的相对抗性序列。序列表明Ｆ＿１代无性系的耐寒性已较不耐寒的父本提高,这与田间观察基本一致。     

不同磷脂和糖脂对莱氏衣原体膜上Mg~（2＋）－ATPase活性的影响

莱氏衣原体膜上Ｍｇ~（２＋）－ＡＴＰａｓｅ用ＤＯＣ溶解后,经Ｓｅｐｈａｒｏｓｅ－６Ｂ和ＤＥＡＥ－ＣｅｌｌｕｌｏｓｅＤＥ－５２离子交换柱,得到了部分纯化的Ｍｇ~（２＋）ＡＴＰａｓｅ,并将此ＡＴＰａｓｅ与不同极性头部的磷脂和膜糖脂重组,研究了不同的极性头部的磷脂和膜糖脂对ＡＴＰａｓｅ活性的影响。此酶的活性不依赖酸性磷脂,ＰＧ、ＤＰＧ、大豆磷脂等明显抑制酶活性,中性磷脂ＤＭＰＣ、ＰＥ、ＰＣ则能增加酶活性,其中尤以非双层脂ＰＥ的作用最为明显。从莱氏衣原体膜上提取的糖脂（ＭＧＤＧ,ＤＧＤＧ）单独和ＡＴＰａｓｅ重组时,酶活性增加并不明显,当ＭＧＤＧ和ＤＧＤＧ以等比例混合时,能大大地增加酶活性。这表明Ｍｇ~（２＋）－ＡＴＰａｓｅ的活性很大程度上与磷脂的表面电荷及磷脂的组成相关。     

Development of the respiratory swimbladder of Pangasius sutchi

The swimbladder of Pangusius sutchi first appears on the dorsal surface of the oesophagus at about 5 days after hatching. The swimbladder has double chambers when it is separated by a medial septum at 8–10 days. Alveoli start to develop and function in air-breathing at 12–14 days. Their number is increased by subdivision, and the respiratory portion grows towards the centre. Morphometric analysis shows that the swimbladder increases in respiratory surface, volume and surface area: volume ratio during development. On a histological basis, the development of the swimbladder is divided into three distinct periods: a blind tube, a double chamber and an alveolus period. It is characteristic that the flat epithelial cell arises from a primordial cuboidal cell and that a double capillary system is arranged in the interalveolar septa. Multilamellar bodies appear and a blood-air barrier is established when the swimbladder becomes functional.