Rho expression and activation in vascular smooth muscle cells

Phenotypic modulation of smooth muscle cells (SMC) involves dramatic changes in expression and organization of contractile and cytoskeletal proteins, but little is known of how this process is regulated. The present study used a cell culture model to investigate the possible involvement of RhoA, a known regulator of the actin cytoskeleton. In rabbit aortic SMC seeded into primary culture at moderate density, Rho activation was high at two functionally distinct time-points, first as cells modulated to the "synthetic" phenotype, and again upon confluence and return to the "contractile" phenotype. Rho expression increased with time, such that maximal expression occurred upon return to the contractile state. Transient transfection of synthetic state cells with constitutively active RhoA (Val14RhoA) caused a reduction in cell size and reorganization of cytoskeletal proteins to resemble that of the contractile phenotype. Actin and myosin filaments were tightly packed and highly organised while vimentin localised to the perinuclear region; focal adhesions were enlarged and concentrated at the cell periphery. Conversely, inhibition of endogenous Rho by C3 exoenzyme resulted in complete loss of contractile filaments without affecting vimentin distribution; focal adhesions were reduced in size and number. Treatment of synthetic state SMC with known regulators of SMC phenotype, heparin and thrombin, caused a modest increase in Rho activation. Long-term confluence and serum deprivation induced cells to return to a more contractile phenotype and this was augmented by heparin and thrombin. The results implicate RhoA for a role in regulating SMC phenotype and further show that activation of Rho by heparin and thrombin correlates with the ability of these factors to promote the contractile phenotype.     

Follow-up to the ECVAM prevalidation study on in vitro tests for acute skin irritation. The European Centre for the Validation of Alternative Methods Skin Irritation Task Force report 2

The European Centre for the Validation of Alternative Methods (ECVAM) Skin Irritation Task Force was established in 1996, to review the status of the development and validation of alternative tests for skin irritation and corrosion, and to identify appropriate non-animal tests for predicting human skin irritation that were sufficiently well-developed to be prevalidated and validated by ECVAM. The EpiDerm method, based on a reconstituted human skin model, was proposed as being sufficiently well advanced to enter a prevalidation (PV) study. Based on a review of test protocols, prediction models (PMs), and data submitted by test developers on ten specified chemicals, with 20% sodium lauryl sulphate as a reference standard, the task force recommended the inclusion of four other tests: EPISKIN and PREDISKIN, based on reconstituted human epidermis or on human skin; the non-perfused pig-ear test, based on pig skin; and the skin integrity function test (SIFT), with ex vivo mouse skin. The prevalidation study on these methods was funded by ECVAM, and took place during 1999-2000. The outcome of the PV study was that none of the methods was ready to enter a formal validation study, and that the protocols and PMs of the methods had to be improved in order to increase their predictive abilities. Improved protocols and PMs for the EpiDerm and EPISKIN methods, the pig ear test, and the SIFT were presented at an extended Task Force meeting held in May 2001. It was agreed that, in the short term, the performance of the revised and harmonised EpiDerm and EPISKIN methods, as well as the modified SIFT, should be evaluated in a further study with a new set of 20 test chemicals. In addition, it was decided that the SIFT and the pig ear test would be compared to see if common endpoints (transepidermal water loss, methyl green-pyronine stain) could be identified.     

Relationships in the Drosophila obscura species group, inferred from mitochondrial cytochrome oxidase II sequences

We compare the sequences for the mitochondrial cytochrome oxidase II gene of 13 species of the Drosophila obscura group. The survey includes six members of the D. affinis subgroup, four of the D. pseudoobscura subgroup, and three of the D. obscura subgroup. In all species, the gene is 688 nucleotides in length, encoding a protein of 229 amino acids plus the first position T of the stop codon. The sequences show the typical high-transition bias for closely related species, but that bias is essentially eliminated for species pairs of > 5% sequence divergence. The phylogenetic relationships in the species group are inferred using both neighbor-joining and maximum parsimony. The two procedures give comparable results, showing that the D. affinis and D. pseudoobscura subgroups are monophyletic groupings that appear to have closer affinities to one another than either has to the D. obscura subgroup. We use transversion distances to estimate times of divergence, on the basis of three different estimates of the time of separation of the D. obscura species group from the D. melanogaster group. If that event occurred 35 Mya, then we can estimate the origin of the nearctic forms at approximately 22 Mya and the separation of the D. affinis and D. pseudoobscura subgroups at approximately 17 Mya.      

土曲霉金色变种AT8951菊粉酶的纯化和性质的研究

土典霉金色变种AT8951菊粉酶粗酶液经硫酸铵分段沉淀、DEAE Cellulose DE32离子交换、超滤、Sephadex G-150凝胶过滤和FPLC,获得两个菊粉酶组分EⅠ和EⅡ,经分析型FPLG和PAGE鉴定为单一纯和分析纯。EⅠ分子量为66KD,最适作用温度和pH分别55℃和5.8;EⅡ分子量为56KD,最适作用温度为57℃,最适pH为6.0。EⅠ和EⅡ皆为糖蛋白,多糖含量分别为24.7％和22％,都属于内切酶。本文还对EⅠ和EⅡ的Km值和I/s值,温度、pH、离子对酶活作用的影响等进行了研究。     

Reasons for the apparent difference in the effects of produced and added ethanol on culture viability during rapid fermentation by Saccharomyces cerevisiae

By feeding ethanol at various high rates to low cell density cultures of Saccharomyces cerevisiae it was shown that the sharp fall in viability when ethanol is produced during rapid fermentations is in part a direct consequence of the high rate of change of extracellular ethanol concentration. Nevertheless, the fall in viability in high cell density rapid fermentations which produced 98 g L(-1) ethanol in 3 h considerably exceeded that of control low cell density cultures to which ethanol was added at the same rate. This difference was shown to be not due to intracellular ethanol accumulation or to differences in glucose concentration between the cultures. The concentrations of a range of potentially toxic fatty acids, higher alcohols, and esters were measured during rapid fermentations, but when added at these concentrations to control cultures in the presence of ethanol they had no significant toxic effect. However, when rapid fermentations were conducted in rich medium containing 80 g L(-1) yeast extract, the apparent difference in toxicity of produced and added ethanol virtually disappeared. Magnesium was shown to be the component of yeast extract primarily responsible for this effect. The high rate of fall of viability when ethanol is rapidly produced is suggested to be partly due to the inability of the cells to adapt quickly enough to the rising ethanol concentration and partly to an increased demand for magnesium at higher ethanol concentrations which cannot be met in Mg-unsupplemented high cell density fermentations.     

Intensive attention improves glycaemic control in insulin-dependent diabetes without further advantage from home blood glucose monitoring: results of a controlled trial.

Forty-six diabetics treated with twice-daily insulin were seen every two weeks for six months in an intensive education programme aided by regular home urine glucose testing. Control was improved with a decrease in 24-hour urinary glucose excretion (median 138 mmol/24 h (24.8 g/24 h) falling to 70 mmol/24 h (12.6 g/24 h); p less than 0.002), glycosylated haemoglobin concentration (mean 11.4 +/- SD 2.3% falling to 10.4 +/- 1.5%; p less than 0.001), and Diastix score (median 3.0 falling to 1.3; p less than 0.001). There was no reported increase in hypoglycaemia. Thirty-eight of the diabetics proceeded to a nine-month randomised cross-over study of the effect on blood glucose control of monitoring urinary glucose or blood glucose measured visually or by a reflectance meter using appropriate reagent strips. No further improvement in control was observed after home blood glucose monitoring. Nevertheless, 29 out of 37 patients preferred blood to urine glucose monitoring. During both the education and cross-over studies there was evidence of an initial improvement in control followed by deterioration. This was independent of the monitoring method used in the cross-over period and may have been due to waning enthusiasm. Despite patient enthusiasm and other reports to the contrary, home blood glucose monitoring offered no improvement in control over intensive attention and conventional urine glucose monitoring.     

The reconstruction of side-chain conformations from protein Cα coordinates

A model of nine proteins including side-chain atoms have been built from the known C^α coordinates and amino acid sequences using a Monte Carlo Protein Building Annealing method. The Cartesian coordinates for the side-chain atoms were established with bond lengths and angles selected randomly from within previously determined ranges. A simulated annealing technique is used to generate some 300 structures with differing side-chain conformations. The atomic coordinates of the backbone atoms are fixed during the simulated annealing process. The coordinates of the side-chain atoms of 300 low energy conformations are averaged to obtain a mean structure that is minimized with the C^α atoms constrained to their position in the x-ray structure using the OPLS/AMBER force field with the GB/SA water model. The rms deviation of the main-chain atoms (without C^β) compared with the corresponding crystal structures is in the range 0.20–0.64 Å. The rms deviation of the side-chain atoms is between 1.72 and 2.71 Å and for all atoms is between 1.19 and 1.99 Å. The method is insensitive to random errors in the C^α positions and the computational requirement is modest. © 1997 John Wiley & Sons, Inc.     

Differences in growth and water relations among Phaseolus vulgaris cultivars in response to induced drought stress

Relatively little ecophysiological research has been conducted to determine the responses to drought of Phaseolus vulgaris. Four bean cultivars (cvs.) from Brazil, A320, Carioca, Ouro Negro and Xodó were submitted to an imposed water deficit in order to evaluate the importance of some adaptive mechanisms of drought resistance through the analysis of growth parameters, water status, gas exchange and indicators of tolerance mechanisms at the cellular level. During the drought treatment, relative growth rates were more reduced for A320 and Xodó than Carioca and Ouro Negro. A320 closed its stomata very rapidly and complete stomatal closure was obtained at Psi(w)=-0.6 MPa, in contrast to the other cvs. where stomata were fully closed only at Psi(w)=-0.9 MPa. Net assimilation rates were closely related to stomatal conductances. Mechanisms at the cellular level appeared to be mostly important for higher tolerance. Carioca and Ouro Negro, when compared to A320 and Xodó, were characterized by having better drought tolerance mechanisms and higher tissue water retention capacity leading to a better growth under water deficits. The leaf dehydration rates of those cvs. were slow whereas those of the drought sensitive cvs. were rapid. The results were confirmed by the electrolyte leakage test and leaf osmotic potential measurements, which indicated higher membrane resistance and osmotic adjustment in the two tolerant cvs. Carioca and Ouro Negro. It appears from this study that despite being cultivated in the same geographical region, the four cvs. of P. vulgaris displayed somewhat different drought adaptive capacities for prolonged drought during the vegetative phase.     

The importance of the prediction model in the validation of alternative tests

An overview is presented of the validation process adopted by the European Centre for the Validation of Alternative Methods, with particular emphasis on the central role of the prediction model (PM). The development of an adequate PM is considered to be just as important as the development of an adequate test system, since the validity of an alternative test can only be established when both components (the test system and the PM) have successfully undergone validation. It is argued, however, that alternative tests and their associated PMs do not necessarily need to undergo validation at the same time, and that retrospective validation may be appropriate when a test system is found to be reliable, but the case for its relevance remains to be demonstrated. For an alternative test to be considered "scientifically valid", it is necessary for three conditions to be fulfilled, referred to here as the criteria for scientific relevance, predictive relevance, and reliability. A minimal set of criteria for the acceptance of any PM is defined, but it should be noted that required levels of predictive ability need to be established on a case-by-case basis, taking into account the inherent variability of the alternative and in vivo test data. Finally, in view of the growing shift in emphasis from the use of stand-alone alternative tests to alternative testing strategies, the importance of making the PM an integral part of the testing strategy is discussed.