Identification of Medically Actionable Secondary Findings in the 1000 Genomes

The American College of Medical Genetics and Genomics (ACMG) recommends that clinical sequencing laboratories return secondary findings in 56 genes associated with medically actionable conditions. Our goal was to apply a systematic, stringent approach consistent with clinical standards to estimate the prevalence of pathogenic variants associated with such conditions using a diverse sequencing reference sample. Candidate variants in the 56 ACMG genes were selected from Phase 1 of the 1000 Genomes dataset, which contains sequencing information on 1,092 unrelated individuals from across the world. These variants were filtered using the Human Gene Mutation Database (HGMD) Professional version and defined parameters, appraised through literature review, and examined by a clinical laboratory specialist and expert physician. Over 70,000 genetic variants were extracted from the 56 genes, and filtering identified 237 variants annotated as disease causing by HGMD Professional. Literature review and expert evaluation determined that 7 of these variants were pathogenic or likely pathogenic. Furthermore, 5 additional truncating variants not listed as disease causing in HGMD Professional were identified as likely pathogenic. These 12 secondary findings are associated with diseases that could inform medical follow-up, including cancer predisposition syndromes, cardiac conditions, and familial hypercholesterolemia. The majority of the identified medically actionable findings were in individuals from the European (5/379) and Americas (4/181) ancestry groups, with fewer findings in Asian (2/286) and African (1/246) ancestry groups. Our results suggest that medically relevant secondary findings can be identified in approximately 1% (12/1092) of individuals in a diverse reference sample. As clinical sequencing laboratories continue to implement the ACMG recommendations, our results highlight that at least a small number of potentially important secondary findings can be selected for return. Our results also confirm that understudied populations will not reap proportionate benefits of genomic medicine, highlighting the need for continued research efforts on genetic diseases in these populations.     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Methods for rapid screening and isolation of bacteria producing acidic lipase: feasibility studies and novel activity assay protocols

Acidic lipase finds its commercial values in medical applications and bioremediation of food wastes. In this work, approaches for rapid screening of lipase-producing bacteria were developed and the feasibility assessment of the screening methods was performed. From food waste samples, the proposed screening procedures allowed isolation of sixteen pure bacterial strains expressing higher lipase activity at acidic pH (pH 6.0) than at alkaline pH (pH 9.0). To enhance the accuracy of lipase activity determination under acidic conditions, a novel assay procedure was also developed by deactivating lipase activity by microwave treatment prior to back titration. This additional step could minimize interferences arising from residual lipase activity during conventional direct back-titration methods in measuring lipase activity at acidic pH. Using the four strategies proposed in this work, the best acidic-lipase-producing isolate was obtained by strategy C (SSC) and was identified as Aeromonas sp. C14, displaying an optimal lipase activity of 0.7 U/ml at an acidic pH of 6.0.     

Roles of phospholipase D in phorbol myristate acetate‐stimulated neutrophil respiratory burst

The phorbol myristate acetate (PMA) stimulated nutrophil respiratory burst has been considered to simply involve the activation of protein kinase C (PKC). However, the PLD activity was also increased by 10‐fold in human neutrophils stimulated with 100 nM PMA. Unexpectedly, U73122, an inhibitor of phospholipase C, was found to significantly inhibit PMA‐stimulated respiratory burst in human neutrophils. U73122 at the concentrations, which were sufficient to inhibit the respiratory burst completely, caused partial inhibition of the PLD activity but no inhibition on PKC translocation and activation, suggesting that PLD activity is also required in PMA‐stimulated respiratory burst. Using 1‐butanol, a PLD substrate, to block phosphatidic acid (PA) generation, the PMA‐stimulated neutrophil respiratory burst was also partially inhibited, further indicating that PLD activation, possibly its hydrolytic product PA and diacylglycerol (DAG), is involved in PMA‐stimulated respiratory burst. Since GF109203X, an inhibitor of PKC that could completely inhibit the respiratory burst in PMA‐stimulated neutrophils, also caused certain suppression of PLD activation, it may suggest that PLD activation in PMA‐stimulated neutrophils might be, to some extent, PKC dependent. To further study whether PLD contributes to the PMA stimulated respiratory burst through itself or its hydrolytic product, 1,2‐dioctanoyl‐sn‐glycerol, an analogue of DAG , was used to prime cells at low concentration, and it reversed the inhibition of PMA‐stimulated respiratory burst by U73122. The results indicate that U73122 may act as an inhibitor of PLD, and PLD activation is required in PMA‐stimulated respiratory burst.     

Motor-Substrate Interactions in Mycoplasma Motility Explains Non-Arrhenius Temperature Dependence

Mycoplasmas exhibit a novel, substrate-dependent gliding motility that is driven by ∼400 “leg” proteins. The legs interact with the substrate and transmit the forces generated by an assembly of ATPase motors. The velocity of the cell increases linearly by nearly 10-fold over a narrow temperature range of 10-40°C. This corresponds to an Arrhenius factor that decreases from ∼45 k_BT at 10°C to ∼10 k_BT at 40°C. On the other hand, load-velocity curves at different temperatures extrapolate to nearly the same stall force, suggesting a temperature-insensitive force-generation mechanism near stall. In this article, we propose a leg-substrate interaction mechanism that explains the intriguing temperature sensitivity of this motility. The large Arrhenius factor at low temperature comes about from the addition of many smaller energy barriers arising from many substrate-binding sites at the distal end of the leg protein. The Arrhenius dependence attenuates at high temperature due to two factors: 1), the reduced effective multiplicity of energy barriers intrinsic to the multiple-site binding mechanism; and 2), the temperature-sensitive weakly facilitated leg release that curtails the power stroke. The model suggests an explanation for the similar steep, sub-Arrhenius temperature-velocity curves observed in many molecular motors, such as kinesin and myosin, wherein the temperature behavior is dominated not by the catalytic biochemistry, but by the motor-substrate interaction.     

Genetic diversity and population structure of Swertia tetraptera (Gentianaceae), an endemic species of Qinghai-Tibetan Plateau

Swertia tetraptera Maxim is an annual alpine herb endemic to the Qinghai-Tibetan Plateau (QTP). Its populations are locally scattered as isolated patches throughout this region. Genetic variation within and among thirty-four populations of this species was assessed using ISSR fingerprinting with 10 primers. High levels of genetic diversity exist within species (P = 98.9%, I = 0.3475; He = 0.2227), while the within-population diversity is low (P = 32.7%, I = 0.177; He = 0.12). High levels of genetic differentiation were detected among populations based on various statistics, including Nei’s genetic diversity analysis (G_ST = 0.4608), Bayesian analysis (θ^B = 0.476) and AMOVA (F_ST = 0.57). That is, populations shared low levels of genetic identity (I = 0.2622–0.0966). This genetic structure was probably due to severe genetic drift, breeding system and limited gene flow. The observed genetic structure of the populations implies that different populations across the distribution range of the species should be sampled to maintain high genetic diversity when a conservation strategy is implemented.     

The physical mapping of bacteriophage T5 transfer tRNAs.

Transfer RNAs, isolated from Escherichia coli F cells infected with T5 bacteriophage, were charged with radioactive amino acids and used in RNA-DNA hybridization studies to detect and locate T5 tRNA cistrons in the T5 DNA chromosome. Hybridization of 14 3H-aminoacyl-tRNA species, including purified T5 [35S]Met-tRNAm and [35S]Met-tRNAf, to the separated strands of T5+ DNA indicates that most, if not all, of the T5 tRNAs are transcribed from the continuous heavy strand of T5 DNA. Heteroduplex mapping of eight mutant T5 DNA deletions has enabled us to locate and determine the size of these deleted segments. By correlating this information with the presence and absence of specific tDNA sequences in these mutants, as determined by tRNA-DNA hybridization, we were able to define the physical limits of four tDNA-containing loci along the T5 DNA molecule. A physical map for 15 tRNA species examined indicates that the structural genes for these tRNAs are clustered within a segment length of T5 DNA that represents approximately 11.2% of the total wild type T5 DNA. The existence of the deletion mutants indicates that T5 tRNAs are dispensable for T5 replication under the growth conditions and for the host employed.