High altitude tissue adaptation in Andean coots: capillarity,fibre area,fibre type and enzymatic activities of skeletal muscle

Capillarity, fibre types, fibre area and enzyme activities of different skeletal muscles (pectoralis, extensor digitorum longus), tibialis anterior, plantaris and the myocardium were compared in Andean coot (Fulica americana peruviana) native to high altitude (Junín, Perú, 4200 m) and the same species nesting at sea level. Numbers of capillaries per square millimeter were higher in all high-altitude muscles when compared with sea-level muscles (P<0.0001). Moreover, values for capillaries per fibre and capillaries in contact with each fibre were higher in digitorum and tibialis high-altitude muscles. Muscle fibres were classified as Type I, Type IIA or Type IIB on the basis of their myofibrillar ATPase pH lability. Pectoralis muscle of high-altitude and sea-level coots presented only fibres of Type IIA. In contrast, all the leg muscles studied showed a mosaic pattern of the three fibre types. Fibre areas were determined using a Leitz Texture Analysis System. Significant differences in fibre area were observed (P<0.01) between high-altitude and sea-level muscles. Mean muscle fibre diameters were also lower in the high-altitude group than in the sea-level group. The enzyme activities studied were hexokinase, lactate dehydrogenase, citrate synthase and 3-hydroxyacyl-CoA-dehydrogenase. The oxidative capacity, as reflected by citrate synthetase and hydroxyacyl-CoA-dehydrogenase activities, was greater for myocardial and pectoralis than for leg muscles. However, analysis of maximal enzyme activities showed that there were no significant differences between the glycolytic and oxidative enzyme activities of high-altitude and sea-level coots. These results suggest that in Andean coots genetically adapted to high altitude, changes in muscle capillarity and fibre size, in addition to high haemoglobin O₂ affinity and low haemoglobin concentration, are sufficient to allow adequate energy production without increases in enzymatic activities.Abbreviations BSA bovine serum albumin - C:F ratio Capillaries per fibre - CAF Capillaries in contact with each fibre - CD capillary density (mm^-2) - CS citrate synthetase - EDL muscularis digitorum longus - fra fraction reduction area - HA high altitude - HAD hydroxyacyl-CoA-dehydrogenase - HK hexokinase - LDH lactate dehydrogenase - P ₅₀ PO₂ at which hemoglobin is half saturated with O₂ - P _aO₂ arterial partial pressure of oxygen - PAS periodic acid-schiff - PEC muscularis pectoralis - PLA muscularis planaris - P _tO₂ mean tissue oxygen pressure - P _vO₂ mixed venous partial pressure of oxygen - SD standard deviation - SL sea level - TA muscularis tibialis anterior - TAS texture analysis system     

RAPD fingerprints for identification and for taxonomic studies of elite poplar (Populus spp.) clones

RAPD (Random Amplified Polymorphic DNA) fingerprints have recently been used to estimate genetic and taxonomic relationships in plants. In this study RAPD analysis was performed on 32 clones belonging to different species of the genus Populus. Of these, 25 clones are registered in several countries for commercial use and, altogether, cover almost 50% of the worlds cultivated poplars. DNA was prepared from leaves and amplified by PCR using random oligonucleotide primers. Amplification products were separated by agarose-gel electrophoresis to reveal band polymorphisms. Four primers out of the 18 tested, were selected on the basis of the number and frequency of the polymorphisms produced. With these a total of 120 different DNA bands were reproducibly obtained, 92% of which were polymorphic. The polymorphisms were scored and used in band-sharing analyses to identify genetic relationships. With a few but interesting exceptions, these are consistent with the present taxonomy of the genus Populus and with the known predigrees of cultivated poplars. Moreover, the results show that RAPD analysis allows one to discriminate among all tested clones and can, therefore, be recommended as a convenient tool to defend plant breeders rights.     

The genetic characterisation of novel multi-addition doubled haploid lines derived from triticale x wheat hybrids

Two novel 46-chromosome doubled haploid lines, W66 and M17, derived from separate hexaploid triticale x bread wheat crosses, were characterised using cytological and biochemical markers. Both lines were shown to be relatively stable cytologically, over 11 and 8 generations of selfing, respectively. By examining mitotic and meiotic chromosomes, the stabilities of the two lines were shown to be similar with frequencies of 2n=46 in 74.2–85.5% of cells. However, over selfed generations, the rye chromosomes were shown to have lost some of their heterochromatin, which made it difficult to establish their continued presence using cytological techniques, such as C-banding alone. Cytological evidence from pairing studies, C-banding, and fluorescence in-situ hybridization, showed that both M17 and W66 are wheat/rye multi-addition lines with rye chromosome constitutions of 1R+6R, and 1R+4R, respectively. These conclusions were confirmed by isozyme and storage-protein analysis.     

Androgen deficiency and aging in men.

Androgen levels decrease with age in men. Androgen deficiency in men older than 65 years leads to asthenia, a decrease in muscle mass, osteoporosis, and a decrease in sexual activity. Androgen deficiency has been reported to cause changes in mood and cognitive function. The combination of these factors results in impaired quality of life in older men. Androgen replacement therapy in hypogonadal men increases bone and muscle mass, enhances muscle and cardiovascular function, and improves sexual function and general well-being; whether elderly men experience benefits of androgen replacement is not known. These benefits have to be weighed against the possible adverse effects of prostate and cardiovascular diseases. Careful long-term studies are needed to assess the risk-to-reward ratios of androgen or other hormone replacement therapy before treatment strategies similar to estrogen therapy for postmenopausal women are implemented.     

On the appropriateness of use of a continuous formulation for the modelling of discrete multireactant systems following Michaëlis–Menten kinetics

The possibility of solving the mass balances to a multiplicity of substrates within a CSTR in the presence of a chemical reaction following Michaelis-Menten kinetics using the assumption that the discrete distribution of said substrates is well approximated by an equivalent continuous distribution on the molecular weight is explored. The applicability of such reasoning is tested with a convenient numerical example. In addition to providing the limiting behavior of the discrete formulation as the number of homologous substrates increases, the continuous formulation yields in general simpler functional forms for the final distribution of substrates than the discrete counterpart due to the recursive nature of the solution in the latter case.List of Symbols C{N. M} mol/m³ concentration of substrate containing N monomer residues each with molecular weight M - {N, M} normalized value of C{N. M} - C {M} mol/m³ da concentration of substrate of molecular weight M - _in normalized value of C {M} at the i-th iteration of a finite difference method - {M} normalized value of C {M} - C ₀{N.M} mol/m³ inlet concentration of substrate containing N monomer residues each with molecular weight M - {N ·M} normalized value of C₀{N. M} - _{0 i} normalized value of C ₀ {M} at the i-th iteration of a finite difference method - C ₀ {M} mol/m³ da initial concentration of substrate of molecular weight M - C _tot mol/m³ (constant) overall concentration of substrates (discrete model) - C _tot mol/m³ (constant) overall concentration of substrates (continuous model) - D deviation of the continuous approach relative to the discrete approach - i dummy integer variable - I arbitrary integration constant - j dummy integer variable - k dummy integer variable - K _m mol/m³ Michaëlis-Menten constant for the substrates - l dummy integer variable - M da molecular weight of substrate - M normalized value of M - M da maximum molecular weight of a reacting substrate - N number of monomer residues of a reacting substrate - N maximum number of monomer residues of a reacting substrate - N total number of increments for the finite difference method - Q m³/s volumetric flow rate of liquid through the reactor - S inert product molecule - S _i substrate containing i monomer residues - V m³ volume of the reactor - v _max mol/m³ s reaction rate under saturating conditions of the enzyme active site with substrate - v _max{N. M} mol/m³ s reaction rate under saturating conditions of the enzyme active site with substrate containing N monomer residues with molecular weight M - _max{N · M} dimensionless value of v_max{N. M} (discrete model) - _max{M} dimensionless value of v _max {M} (continuous model) - mol/m³ s molecular weight-averaged value of v_max (discrete model) - mol.da/m³s molecular weight-averaged value of v_max (continuous model) - v _max {M} mol.da/m³s reaction rate under saturating conditions of the enzyme active site with substrate with molecular weight M - _max {M} dimensionless value of v_max{M} - _{max, (i)} dimensionless value of v_max{M} at the i-th iteration of a finite difference method - v _max mol/m³ s reference constant value of v _max Greek Symbols dimensionless operating parameter (discrete distribution) - dimensionless operating parameter (continuous distribution) - M da (average) molecular weight of a monomeric subunit - M selected increment for the finite difference method - auxiliary corrective factor (discrete model)     

α-Domain of human metallothionein IA can bind to metals in transgenic tobacco plants

We have introduced a genetically marked Dissociation transposable element (Ds ^HPT ) into tomato (Lycopersicon esculentum) by Agrobacterium tumefaciens-mediated transformation. Probes for the flanking regions of the T-DNA and transposed Ds ^HPT elements were obtained with the inverse polymerase chain reaction (IPCR) technique and used in RFLP linkage analyses. The RFLP map location of 11 T-DNAs carrying Ds ^HPT was determined. The T-DNAs are distributed on 7 of the 12 tomato chromosomes. To explore the feasibility of gene tagging strategies in tomato using Ds ^HPT , we examined the genomic distribution of Ds ^HPT receptor sites relative to the location of two different, but very closely linked, T-DNA insertion sites. After crosses with plants expressing Ac transposase, the hygromycin phosphotransferase (HPT) marker on the Ds element and the excision markers β-glucuronidase (GUS) and Basta resistance (BAR) facilitated the identification of plants bearing germinally transposed Ds ^HPT elements. RFLP mapping of 21 transposed Ds ^HPT elements originating from the two different T-DNA insertions revealed distinct patterns of reintegration sites.     

大鼠前列腺上皮细胞角蛋白8mRNA表达调节的定位研究

本文应用反义RNA探针原位杂交法,研究雄激素对大鼠腹侧前列腺(VP)上皮细胞角蛋白(CK)8 mRNA表达的影响。发现1.在任何VP组织切片中,CK 8探针专一、大量定位于VP腺上皮细胞中,CK 8 mRNA是前列腺上皮细胞特异而灵敏的标志。2.去睾大鼠VP CK 8 mRNA染色增强,提示CK 8mRNA有过度表达,注射雄激素又可抑制其过度表达。3.与已知受雄激素抑制性基因不同,即使大鼠VP完全萎缩之后达2个月之久,其存留腺上皮细胞CK 8 mRNA表达仍持续增高。4.前列腺发育早期,迅速增殖的幼稚腺上皮细胞高度表达CK 8 mRNA,以后随着体内雄激素水平升高,VP上皮CK 8 mRNA表达下降,分布转移。以上结果进一步支持前列腺CK 8基因是新的一类受雄激素抑制性基因的推测,同时表明前列腺CK 8基因的表达与前列腺干细胞的增殖分化有密切联系,CK 8 mRNA高度表达是前列腺干细胞一个重要特征。