HyLiTE: accurate and flexible analysis of gene expression in hybrid and allopolyploid species

Background

Forming a new species through the merger of two or more divergent parent species is increasingly seen as a key phenomenon in the evolution of many biological systems. However, little is known about how expression of parental gene copies (homeologs) responds following genome merger. High throughput RNA sequencing now makes this analysis technically feasible, but tools to determine homeolog expression are still in their infancy.

Results

Here we present HyLiTE – a single-step analysis to obtain tables of homeolog expression in a hybrid or allopolyploid and its parent species directly from raw mRNA sequence files. By implementing on-the-fly detection of diagnostic parental polymorphisms, HyLiTE can perform SNP calling and read classification simultaneously, thus allowing HyLiTE to be run as parallelized code. HyLiTE accommodates any number of parent species, multiple data sources (including genomic DNA reads to improve SNP detection), and implements a statistical framework optimized for genes with low to moderate expression.

Conclusions

HyLiTE is a flexible and easy-to-use program designed for bench biologists to explore patterns of gene expression following genome merger. HyLiTE offers practical advantages over manual methods and existing programs, has been designed to accommodate a wide range of genome merger systems, can identify SNPs that arose following genome merger, and offers accurate performance on non-model organisms.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-014-0433-8) contains supplementary material, which is available to authorized users.     

Identification and characterization of the intracellular poly-3-hydroxybutyrate depolymerase enzyme PhaZ of Sinorhizobium meliloti

Background  

S. meliloti forms indeterminate nodules on the roots of its host plant alfalfa (Medicago sativa). Bacteroids of indeterminate nodules are terminally differentiated and, unlike their non-terminally differentiated counterparts in determinate nodules, do not accumulate large quantities of Poly-3-hydroxybutyrate (PHB) during symbiosis. PhaZ is in intracellular PHB depolymerase; it represents the first enzyme in the degradative arm of the PHB cycle in S. meliloti and is the only enzyme in this half of the PHB cycle that remains uncharacterized.     

Correction: deviation of eyes and head in acute cerebral stroke

This is a correction article     

Development of 25 gene‐associated microsatellite markers of Atlantic cod (Gadus morhua L.)

Microsatellites were identified by screening 2294 GenBank entries available for Atlantic cod (Gadus morhua L.), mainly representing expressed sequence tags and cDNA sequences. Ninety‐two novel microsatellite loci (tetra‐, tri‐ and dinucleotides) were characterized on 96 individuals. This strategy yielded 25 gene‐associated polymorphic microsatellite markers (11 tri‐ and 14 dinucleotides) with two to 20 alleles and an average heterozygosity of 0.48 in the population studied (range 0.02–0.89). One marker exhibited significant homozygote excess, and one of the primer pairs amplified two linked markers. The gene identity was determined at nine of the loci, confirming the associated microsatellites as type I markers.     

Chemical reactivity of some isothiazolone biocides

Chemical reactions between the isothiazolone biocides, N-methylisothiazol-3-one (MIT), benzisothiazol-3-one (BIT) and 5-chloro-N-methylisothiazol-3-one (CMIT) with cysteine have been investigated by u.v. and NMR spectroscopy. At physiological pH all three agents interacted oxidatively with thiols to form disulphides. Further interaction with thiols caused the release of cystine and formation of a reduced, ring-opened form of the biocide (mercaptoacrylamide). In an analogous fashion to the initial reaction the mercaptoacrylamide reacted with another molecule of biocide to give biocide dimers. NMR spectral studies indicated that for CMIT the mercaptoacrylamide form is capable of tautomerization to a highly reactive thio-acyl chloride. Formation of mercaptoacrylamide was in all cases highly pH-dependent. Alcohol dehydrogenase was insensitive to all three agents but was highly sensitive to CMIT when co-administered with dithiothreitol. Capacity to form a thioacyl chloride from the mercaptoacrylamide is suggested to account for much of this enhanced activity. Stopped-flow spectroscopic studies showed rates of reaction with glutathione (GSH) to directly parallel antimicrobial activity. Additionally, CMIT was able to react directly with both ionization states of GSH (pH 7-10) whilst BIT and MIT appeared only to interact when the glutamyl-nitrogen of GSH was charged (pH 8.5).     

The self-assembly, elasticity, and dynamics of cardiac thin filaments

Solutions of intact cardiac thin filaments were examined with transmission electron microscopy, dynamic light scattering (DLS), and particle-tracking microrheology. The filaments self-assembled in solution with a bell-shaped distribution of contour lengths that contained a population of filaments of much greater length than the in vivo sarcomere size (∼1 μm) due to a one-dimensional annealing process. Dynamic semiflexible modes were found in DLS measurements at fast timescales (12.5 ns-0.0001 s). The bending modulus of the fibers is found to be in the range 4.5-16 × 10⁻²⁷ Jm and is weakly dependent on calcium concentration (with Ca²⁺ ≥ without Ca²⁺). Good quantitative agreement was found for the values of the fiber diameter calculated from transmission electron microscopy and from the initial decay of DLS correlation functions: 9.9 nm and 9.7 nm with and without Ca²⁺, respectively. In contrast, at slower timescales and high polymer concentrations, microrheology indicates that the cardiac filaments act as short rods in solution according to the predictions of the Doi-Edwards chopsticks model (viscosity, η ∼ c³, where c is the polymer concentration). This differs from the semiflexible behavior of long synthetic actin filaments at comparable polymer concentrations and timescales (elastic shear modulus, G′ ∼ c^1.4, tightly entangled) and is due to the relative ratio of the contour lengths (∼30). The scaling dependence of the elastic shear modulus on the frequency (ω) for cardiac thin filaments is G′ ∼ ω^{3/4 ± 0.03}, which is thought to arise from flexural modes of the filaments.     

Double-globular structure of porcine stomach mucin: a small-angle X-ray scattering study

We present evidence from small-angle X-ray scattering synchrotron experiments that porcine stomach mucin (MUC6) contains a double-globular comb structure. Analysis of the amino acid sequence of the peptide comb backbone indicates that the globular structure is determined by both the charge and hydrophobicity of the amino acids and the placement of the short hydrophilic carbohydrate side chains (approximately 2.5 nm). The double-globular structure is, thus, due to a block copolymer type hydrophobic polyampholyte charge instability in contrast to the random copolymer instabilities observed previously with synthetic polyelectrolytes (particularly polystyrene sulfonates). Careful filtering was required to exclude multimonomer aggregates from the X-ray measurements. A double Guinier analysis ( R g approximately 26 nm) and a double power law fit are consistent with two globules per chain in low salt conditions. The average radius of the globules is approximately 10 nm in salt- free condition (double Guinier fit) and the average distance of intrachain separation of the globules is 48 nm. The addition of salt causes a significant decrease in the radius of gyration (14 nm 100 mM NaCl) of the chains and is attributed to the contraction of the glycosylated peptide spacer between the two globules (the globular size continues to be approximately 10 nm and the globule separation is then 18 nm). Without salt, the scaling of the semidilute mesh size (xi) as a function of the mucin concentration (c) is xi approximately c (-0.45)compared with xi approximately c (-0.28) in high salt conditions, highlighting the globular nature of the chains. In contrast, hydrophilic flexible polyelectrolytes have a stronger concentration dependence of xi when excess salt is added.     

In-hospital resource utilization in coronary angioplasty: the impact of increased coronary stenting rates and antiplatelet therapy

BACKGROUND: The technique of coronary stenting has evolved over recent years, with improved stent technology and effective antiplatelet therapies to prevent stent thrombosis. In Europe, reductions in stent and equipment costs have resulted from increased market competition. The impact of these changes on the in-hospital procedural cost of percutaneous coronary intervention (PCI) in the current clinical setting is not known. METHODS: We compared the initial equipment and pharmaceutical costs of one hundred consecutive, unselected patients undergoing PCI in 1998 to a similar population who underwent PCI in 1994. RESULTS: Similar patient characteristics were noted, yet more complex disease (multivessel, AHA type B2/C lesions) was treated in the 1998 population. The stent utilization rate (83% vs 15%, p < 0.0001) and use of intravenous and/or oral antiplatelet therapy (abciximab, ticlopidine) (64% vs 4%, p < 0.0001) was higher in 1998. Similar angiographic success was achieved in each group with low complication rates. Mean hospital stay was reduced in the 1998 group (2.6 +/- 2.8 vs 4.3 +/- 3.8 days, p < 0.001). Repeat PCI was required more frequently in the 1994 population (26% vs 9%, p < 0.001). Overall there was no significant difference in the mean equipment cost between the two groups ( pound 1551 vs pound 1422, p=ns). CONCLUSION: Despite the widespread use of coronary stenting and antiplatelet therapies there appears to be no difference in current in-hospital equipment costs for PCI compared to 1994. Improved clinical outcomes in the 1998 population imply that stenting is a cost-effective therapy.