Polyphasic identification of wild yeast strains isolated from Greek sourdoughs

A total of forty-five wild yeast strains were isolated from five traditional Greek wheat sourdoughs. Strains were identified using the classical identification technique along with the sodium dodecyl sulfate-polyacrylamide gel electrophoresis of whole cell proteins (SDS-PAGE), Fourier transform-infrared spectroscopy (FT-IR) and the randomly amplified polymorphic DNA-polymerase chain reaction analysis (RAPD-PCR). The latter methods confirmed the classical identification. According to the results obtained, fourteen strains were identified as Saccharomyces cerevisiae strains, twenty-five as Pichia membranaefaciens strains and six as Yarrowia lipolytica.     

pK(a) calculations of calbindin D(9k): effects of Ca(2+) binding, protein dielectric constant, and ionic strength

Calbindin is a small (75 residues) helix-loop-helix ("EF-hand") calcium-binding protein belonging to the calmodulin superfamily. It binds two Ca(2+) ions. Continuum electrostatics in combination with the boundary element method was employed for the calculation of the acid-dissociation constants K(a) (pK(a) = -log K(a)) values of all titratable residues in the protein. The objectives were to determine quantitatively the effects of divalent ion binding and small ion-induced structural changes on predicted pK(a)'s. Computations were carried out for the apo and holo form of calbindin, for which both X-ray and NMR structures were available. Comparison was made with several sets of experimental pK(a) values determined by NMR spectroscopy. Different choices of the dielectric constant (ranging from 4 to 78.5) for calbindin and variations in ionic strength (from 0 to 0.3 M) were investigated in a systematic fashion. Removal of the two bound Ca(2+) ions increases the pK(a) values of all residues if no conformational changes were allowed. If conformational differences between the apo and holo were accounted for, shifts in either direction were observed. Titrating groups that are directly involved in Ca(2+) binding (Asp and Glu) required a dielectric constant of 78.5 for the holo structure to obtain a reasonable estimate of their pK(a)'s. For the apo structure, passable values for the pK(a)'s of these ligating groups could be determined if the structure was allowed to relax upon ion removal.     

Peptide and metal ion-dependent association of isolated helix-loop-helix calcium binding domains: studies of thrombic fragments of calmodulin

Calmodulin (CaM), the ubiquitous, eukaryotic, bilobal calcium-binding regulatory protein, has been cleaved by thrombin to create two fragments. TM1 (1-106) and TM2 (107-148). NMR and CD results indicate that TMI and TM2 can associate in the presence of Ca2+ to form a complex similar to native CaM, even though the cleavage site is not in the linker region between two helix-loop-helix domains, but rather within an alpha-helix. Cadmium-113 NMR results show that this complex has enhanced metal-ion binding properties when compared to either TM1 or TM2 alone. This complex can bind several CaM-binding target peptides, as shown by gel bandshift assays, circular dichroism spectra, and 13C NMR spectra of biosynthetically methyl-13C-Met-labeled TM1 and TM2; moreover, gel bandshift assays show that the addition of a target peptide strengthens the interactions between TM1 and TM2 and increases the stability of the complex. Cadmium-113 NMR spectra indicate that the TM1:TM2 complex can also bind the antipsychotic drug trifluoperazine. However, in contrast to CaM:peptide complexes, the TM1:TM2:peptide complexes are disrupted by 4 M urea; moreover, TM1 and TM2 in combination are unable to activate CaM-dependent enzymes. This suggests that TM1:TM2 mixtures cannot bind target molecules as tightly as intact CaM, or perhaps that binding occurs but additional interactions with the target enzymes that are necessary for proper activation are perturbed by the proteolytic cleavage. The results presented here reflect the importance of the existence of helix-loop-helix Ca2+-binding domains in pairs in proteins such as CaM, and extend the understanding of the association of such domains in this class of proteins in general.     

Structural dynamics of the DnaK-peptide complex

The molecular chaperone DnaK recognizes and binds substrate proteins via a stretch of seven amino acid residues that is usually only exposed in unfolded proteins. The binding kinetics are regulated by the nucleotide state of DnaK, which alternates between DnaK.ATP (fast exchange) and DnaK.ADP (slow exchange). These two forms cycle with a rate mainly determined by the ATPase activity of DnaK and nucleotide exchange. The different substrate binding properties of DnaK are mainly attributed to changes of the position and mobility of a helical region in the C-terminal peptide-binding domain, the so-called LID. It closes the peptide-binding pocket and thus makes peptide binding less dynamic in the ADP-bound state, but does not (strongly) interact with peptides directly. Here, we address the question if nucleotide-dependent structural changes may be observed in the peptide-binding region that could also be connected to peptide binding kinetics and more importantly could induce structural changes in peptide stretches using the energy available from ATP hydrolysis. Model peptides containing two cysteine residues at varying positions were derived from the structurally well-documented peptide NRLLLTG and labelled with electron spin sensitive probes. Measurements of distances and mobilities of these spin labels by electron paramagnetic resonance spectroscopy (EPR) of free peptides or peptides bound to the ATP and ADP-state of DnaK, respectively, showed no significant changes of mobility nor distance of the two labels. This indicates that no structural changes that could be sensed by the probes at the position of central leucine residues located in the center of the binding region occur due to different nucleotide states. We conclude from these studies that the ATPase activity of DnaK is not connected to structural changes of the peptide-binding pocket but rather only has an effect on the LID domain or other further remote residues.     

In vitro gas production as a surrogate measure of the fermentability of cellulosic biomass to ethanol

Current methods for measuring ethanol yields from lignocellulosic biomass are relatively slow and are not well geared for analyzing large numbers of samples generated by feedstock management and breeding research. The objective of this study was to determine if an in vitro ruminal fermentation assay used in forage quality research was predictive of results obtained using a conventional biomass-to-ethanol conversion assay. In the conventional assay, herbaceous biomass samples were converted to ethanol by Saccharomyces cerevisiae cultures in the presence of cellulase enzymes. Cultures were grown in sealed serum bottles and gas production monitored by measuring increasing head space pressure. Gas accumulation as calculated from the pressure measurements was highly correlated (r²>0.9) with ethanol production measured by gas chromatography at 24 h or 7 days. The same feedstocks were also analyzed by in vitro ruminal digestion, as also measured by gas accumulation. Good correlations (r²0.63–0.82) were observed between ethanol production during simultaneous saccharification and fermentation and gas accumulation in parallel in vitro ruminal fermentations. Because the in vitro ruminal fermentation assay can be performed without sterilization of the medium and does not require aseptic conditions, this assay may be useful for biomass feedstock agronomic and breeding research.Disclaimer: Mention of specific products is for informational purposes only and does not imply a warranty or recommendation of such products to the exclusion of other products that may also be suitable.     

Structure-function relationships of purple acid phosphatase from red kidney beans based on heterologously expressed mutants

Purple acid phosphatases are binuclear metalloenzymes, which catalyze the conversion of orthophosphoric monoesters to alcohol and orthophosphate. The enzyme from red kidney beans is characterized with a Fe(III)-Zn(II) active center. So far, the reaction mechanisms postulated for PAPs assume the essentiality of two amino acids, residing near the bimetallic active site. Based on the amino acid sequence of kidney bean PAP (kbPAP), residues H296 and H202 are believed to be essential for catalytic function of the enzyme. In the present study, the role of residue H202 has been elucidated. Mutants H202A and H202R were prepared by site-directed mutagenesis and expressed in baculovirus-infected insect cells. Based on kinetic studies, residue H202 is assumed to play a role in stabilizing the transition state, particularly in charge compensation, steric positioning of the substrate, and facilitating the release of the product by protonating the substrate leaving groups. The study confirmed the essentiality and elucidates the functional role of H202 in the catalytic mechanism of kbPAP.     

In vitro assembly of mosaic hepatitis B virus capsid-like particles (CLPs): rescue into CLPs of assembly-deficient core protein fusions and FRET-suited CLPs

Hepatitis B virus core protein self-assembles into icosahedral, highly immunogenic capsid-like particles (CLPs) that can serve as molecular platforms for heterologous proteins. Insertion into the centrally located c/e1 epitope leads to surface display, fusion to the C terminus to internal disposition of the foreign domains. However, symmetry-defined space restrictions on the surface and particularly inside the CLPs limit the size of usable heterologous fusion partners. Further, CLPs carrying differing foreign domains are desirable for applications such as multivalent vaccines, and for structure probing by distance sensitive interactions like fluorescence resonance energy transfer (FRET). Here, we report an in vitro co-assembly system for such mosaic-CLPs allowing successful CLP formation with a per se assembly-deficient fusion protein, and of CLPs from two different fluoroprotein-carrying fusions that exert FRET in an assembly-status dependent way.     

The tRNase Z family of proteins: physiological functions, substrate specificity and structural properties

tRNase Z is the endoribonuclease that generates the mature 3'-end of tRNA molecules by removal of the 3'-trailer elements of precursor tRNAs. This enzyme has been characterized from representatives of all three domains of life (Bacteria, Archaea and Eukarya), as well as from mitochondria and chloroplasts. tRNase Z enzymes come in two forms: short versions (280-360 amino acids in length), present in all three kingdoms, and long versions (750-930 amino acids), present only in eukaryotes. The recently solved crystal structure of the bacterial tRNase Z provides the structural basis for the understanding of central functional elements. The substrate is recognized by an exosite that protrudes from the main protein body and consists of a metallo-beta-lactamase domain. Cleavage of the precursor tRNA occurs at the binuclear zinc site located in the other subunit of the functional homodimer. The first gene of the tRNase Z family was cloned in 2002. Since then a comprehensive set of data has been acquired concerning this new enzyme, including detailed functional studies on purified recombinant enzymes, mutagenesis studies and finally the determination of the crystal structure of three bacterial enzymes. This review summarizes the current knowledge about these exciting enzymes.