Floral ontogeny inMazus pumilus (Scrophulariaceae)

InMazus pumilus, all the floral appendages are initiated in acropetal sequence in the second cell layer (except stamens) of the floral primordium by periclinal divisions. The actinomorphic calyx tube is formed due to zonal growth. The zygomorphy in corolla is evident from the inception of petal primordia which arise sequentially as independent units in order of one anterior, a pair of anterio-lateral followed by a pair of posterio-lateral. Later these primordia exhibit differential growth because of which zygomorphy becomes more pronounced. The upper corolla tube is formed by interprimordial growth and lower corolla tube by zonal growth. Stamens are initiated in the third layer of the floral apex. Unlike sepals and petals, in the development of stamens (4) underlying cells of corpus also contribute. Posterior stamen is absent. The stamens become epipetalous because of interprimordial and zonal growth in the common region below the bases of petals as well as stamens. The two carpel primordia arise as crescent shaped structures which become continuous due to interprimordial growth. The ovary is formed by a ring of zonal meristem. The style develops later between stigma and ovary because of intercalary growth. The residual apex grows vertically along with the ovary and forms the septum of the ovary. All the floral appendages exhibit similar pattern of histogenesis and early growth suggesting thereby the appendicular nature of these appendages.     

The induction of CP43′ by iron-stress in Synechococcus sp. PCC 7942 is associated with carotenoid accumulation and enhanced fatty acid unsaturation

Comparative lipid analysis demonstrated reduced amount of PG (50%) and lower ratio of MGDG/DGDG in iron-stressed Synechococcus sp. PCC 7942 cells compared to cells grown under iron sufficient conditions. In parallel, the monoenoic (C:1) fatty acids in MGDG, DGDG and PG increased from 46.8%, 43.7% and 45.6%, respectively in control cells to 51.6%, 48.8% and 48.7%, respectively in iron-stressed cells. This suggests increased membrane dynamics, which may facilitate the diffusion of PQ and keep the PQ pool in relatively more oxidized state in iron-stressed compared to control cells. This was confirmed by chlorophyll fluorescence and thermoluminescence measurements. Analysis of carotenoid composition demonstrated that the induction of isiA (CP43′) protein in response to iron stress is accompanied by significant increase of the relative abundance of all carotenoids. The quantity of carotenoids calculated on a Chl basis increased differentially with nostoxanthin, cryptoxanthin, zeaxanthin and β-carotene showing 2.6-, 3.1-, 1.9- and 1.9-fold increases, respectively, while the relative amount of caloxanthin was increased only by 30%. HPLC analyses of the pigment composition of Chl-protein complexes separated by non-denaturating SDS-PAGE demonstrated even higher relative carotenoids content, especially of cryptoxanthin, in trimer and monomer PSI Chl-protein complexes co-migrating with CP43′ from iron-stressed cells than in PSI complexes from control cells where CP43′ is not present. This implies a carotenoid-binding role for the CP43′ protein which supports our previous suggestion for effective energy quenching and photoprotective role of CP43′ protein in cyanobacteria under iron stress.     

Incidence and identification of Cassava tuber rot caused by Phytophthora palmivora

The occurrence of Cassava tuber rot in regions of Kolli hills, Kollam, and Kottayam of South India, causes major economic loss up to 70% in Cassava production. The disease tuber is characterised by brown watery lesions with foul smell, making it unfit for further use. The sporangia of the pathogen were oval and ellipsoid with a short pedicle. Identification of the isolate from these regions was also confirmed by ribosomal internal transcribed spacer (ITS) of rDNA region. The pathogen was highly aggressive when pathogenicity was tested. Based on morphological, pathogenicity and ITS sequences, the pathogen was identified as Phytophthora palmivora. Development of integrated disease management practices is essential to combat the disease. This is the first report recording the spread of Cassava tuber rot disease in regions of Kolli hills of Tamil Nadu and Kollam and Kottayam, of Kerala.     

Enzyme cascade converting cyclohexanol into ε-caprolactone coupled with NADPH recycling using surface displayed alcohol dehydrogenase and cyclohexanone monooxygenase on E. coli

The application of enzymes as biocatalysts in industrial processes has great potential due to their outstanding stereo-, regio- and chemoselectivity. Using autodisplay, enzymes can be immobilized on the cell surface of Gram-negative bacteria such as Escherichia coli. In the present study, the surface display of an alcohol dehydrogenase (ADH) and a cyclohexanone monooxygenase (CHMO) on E. coli was investigated. Displaying these enzymes on the surface of E. coli resulted in whole-cell biocatalysts accessible for substrates without further purification. An apparent maximal reaction velocity V_MAX(app) for the oxidation of cyclohexanol with the ADH whole-cell biocatalysts was determined as 59.9 mU ml⁻¹. For the oxidation of cyclohexanone with the CHMO whole-cell biocatalysts a V_MAX(app) of 491 mU ml⁻¹ was obtained. A direct conversion of cyclohexanol to ε-caprolactone, which is a known building block for the valuable biodegradable polymer polycaprolactone, was possible by combining the two whole-cell biocatalysts. Gas chromatography was applied to quantify the yield of ε-caprolactone. 1.12 mM ε-caprolactone was produced using ADH and CHMO displaying whole-cell biocatalysts in a ratio of 1:5 after 4 h in a cell suspension of OD_578nm 10. Furthermore, the reaction cascade as applied provided a self-sufficient regeneration of NADPH for CHMO by the ADH whole-cell biocatalyst.     

Rational design,molecular docking and synthesis of novel homopiperazine linked imidazo[1,2-a]pyrimidine derivatives as potent cytotoxic and antimicrobial agents

Designed and synthesized novel homopiperazine linked imidazo[1,2-a]pyrimidine derivatives (10a–i, 11a–g, 12), and evaluated them for their in vitro cytotoxicity against HeLa cells (cervical cancer), A549 cells (lung cancer) cells, by MTT assay. Compound 12 (IC₅₀ = 4.14 µM) and compound 10c (IC₅₀ = 5.98 µM) were found to be 2.5 fold, and 1.74 fold more potent when compared with standard Etoposide (IC₅₀ = 10.44 µM), against A549 (lung cancer cells). Compound 12 also found to be 1.57 and 1.13 fold potent against DU145 (IC₅₀ = 6.24 µM) and HeLa (IC₅₀ = 6.54 µM), respectively when compared with Etoposide (DU145, IC₅₀ = 9.8 µM; HeLa, IC₅₀ = 7.43 µM). Compound 10f (IC₅₀ = 6.12 µM) was found to be 1.31 fold more potent than Etoposide (IC₅₀ = 7.43 µM) against HeLa cell lines.Moreover compounds 10a and 11a showed cytotoxicity at low micro-molar concentrations against A549 cells. Synthesized compounds were also evaluated for their antimicrobial activity by Cup plate diffusion method. Compounds 10c, 11b, 11d and 11f displayed remarkable antimicrobial activity relating to their standard drugs Gentamycin, Amphotericin B and Ampicillin. Significantly, compound 10c showed broad spectrum activity against tested microbial strains. All the designed compounds were well occupied the binding site of the colchicine and interacted with both α- and β-tubuline interface (PDB ID: 3E22), which demonstrates that synthesized compounds are promising tubulin inhibitors. Also, the synthesized compounds occupied the catalytic triad and adenine-binding site, in the active site of β-ketoacyl-acyl carrier protein synthase III enzyme (PDB ID: 1MZS). The molecular docking results provided the useful information for the future design of more potent inhibitors. These preliminary results convinced further investigation and modifications on synthesized compounds aiming towards the development of potential cytotoxic as well as antimicrobial agents.     

Immobilization of Heavy Metals in Soil Using Natural and Waste Materials for Vegetation Establishment on Contaminated Sites

Contaminated land is increasingly becoming an important issue worldwide. Many contaminants are persistent in soil for a large number of years. With the increase in public awareness regarding the consequences of contaminated soil, many researchers are concentrating on developing cost-effective and socially acceptable soil remediation technologies. Soils of many sites, which have been left derelict after industrial decline, harbor a broad suite of metal and organic contaminants. Land where such contaminants are deemed to pose a significant risk to receptors is considered contaminated under modern guidance. Remediation to break identified pollutant linkages would precede reclamation and plant establishment. One approach to break the pollutant receptor linkage is to utilize materials that effectively create soil conditions that immobilize contaminants whilst providing essential plant growth properties in terms of nutrition and water holding capacity. Materials that may achieve this include: 1) composts derived from materials such as sewage sludges and other municipal sources; 2) natural or synthetic zeolites; or 3) industrial by-products such as red-mud or other iron-rich materials such as iron grit or iron oxyhydroxides. Remediation techniques that utilize such materials may be cost-effective compared to more traditional methods and may effectively divert materials from the waste stream and could thereby make a dual contribution to sustainable development.     

Formulation, evaluation, and comparison of bilayered and multilayered mucoadhesive buccal devices of propranolol hydrochloride

The purpose of this research work was to establish mucoadhesive buccal devices of propranolol hydrochloride (PRH) in the forms of bilayered and multilayered tablets. The tablets were prepared using sodium carboxymethylcellulose (SCMC) and Carbopol-934 (CP) as bioadhesive polymers to impart mucoadhesion and ethyl cellulose (EC) to act as an impermeable backing layer. Buccal devices were evaluated by different parameters such as weight uniformity, content uniformity, thickness, hardness, surface pH, swelling index, ex vivo mucoadhesive strength, ex vivo mucoadhesion time, in vitro drug release, and in vitro drug permeation. As compared with bilayered tablets, multilayered tablets showed slow release rate of drug with improved ex vivo bioadhesive strength and enhanced ex vivo mucoadhesion time. The mechanism of drug release was found to be non-Fickian diffusion (value of n between 0.5 and 1.0) for both the buccal devices. The stability of drug in both the optimized buccal devices was tested for 6 hours in natural human saliva; both the buccal devices were found to be stable in natural human saliva. The present study concludes that mucoadhesive buccal devices of PRH can be a good way to bypass the extensive hepatic first-pass metabolism and to improve the bioavailability of PRH. Published: March 16, 2007