Recovery of <Emphasis Type="Italic">Bacillus</Emphasis> and <Emphasis Type="Italic">Pseudomonas</Emphasis> spp. from the ‘Fired Plots’ Under Shifting Cultivation in Northeast India

Soil samples, collected after the fire operations at agricultural sites under shifting cultivation in northeast India, were subjected to physico-chemical and microbial analysis. The fire affected various physico-chemical properties of the soil. Significant differences in pH and electrical conductivity were recorded in soil of fired and fallow plots. Significantly higher amounts of total organic carbon and nitrogen were estimated in fallow plots as compared to the fired. Difference in total phosphates was not significant. The fire operations resulted in stimulation of microbial communities. The bacteria were the most affected group followed by actinomycetes and fungi, respectively. The bacterial and actinomycetes counts were significantly higher in fired plots as compared to the fallow plots. The representative bacterial species recovered from the ‘fired plots’ belonged to the genus Bacillus and Pseudomonas. 16S rRNA analysis revealed their maximum similarity with B. clausii, B. licheniformis, B. megaterium, B. subtilis, B. thuringiensis, P. aeruginosa and P. stutzeri. Most of these species were found to be positive for phosphate solubilization and antagonism in plate based assays. In view of the importance of Bacillus and Pseudomonas species in plant growth promotion and biocontrol, recovery of these species after fire operations is indicative of the microbiological merit of shifting cultivation.     

Pretreatments for enhancing clarification efficiency of depth filtration during production of monoclonal antibody therapeutics

High cell density, high product titer mammalian cell culture is the new paradigm for production of recombinant proteins. While the typical motivation is to get a high product titer, additional undesirable outcomes often include an increase in percentage solids in the cell culture fluid (cellular debris and sub-micron colloids), thereby offering new challenges to downstream processing. This article focuses on scouting and comparison of different approaches used for clarification of cell culture fluid. The approaches include centrifugation followed by depth filtration, direct depth filtration without centrifugation and feed pretreatment with use of specially designed density gradient filtration to improve efficiency of clarification and removal of process contaminants from feed stream. The work also evaluates impact of three different pretreatment approaches, namely pH adjustment to acidic condition, metal cation (calcium phosphate) flocculation, and polycationic polymer flocculation (using polymer-I and polymer-II). The results obtained indicate that the use of pretreatment significantly improves the clarification efficiency of depth filtration. Pretreatment options like polycationic polymer-I based flocculation resulted in a >5 fold reduction in filter area requirement as well as >6 fold reduction in HCDNA while retaining acceptable recovery of the IgG (>98%). Thus, pretreatment offers a significant reduction in the depth filtration footprint (~5–6 fold decrease in filter area requirement). However, one must take into consideration the process development time required, capital cost, consumable cost, cost of the pretreatment chemical, cost of testing to demonstrate clearance of treatment agent, ease of scale-ability, and process robustness when finalizing the optimal clarification approach.     

Searching Biomarkers in the Sequenced Genomes of <Emphasis Type="Italic">Staphylococcus</Emphasis> for their Rapid Identification

Bacterial identification using rrs (16S rRNA) gene is widely reported. Bacteria possessing multiple copies of rrs lead to overestimation of its diversity. Staphylococcus genomes carries 5–6 copies of rrs showing high similarity in their nucleotide sequences, which lead to ambiguous results. The genomes of 31 strains of Staphylococcus representing 7 species were searched for the presence of common genes. In silico digestion of 34 common genes using 10 restriction endonucleases (REs) lead to select gene-RE combinations, which could be used as biomarkers. RE digestion of recA allowed unambiguous identification of 13 genomes representing all the 7 species. In addition, a few more genes (argH, argR, cysS, gyrB, purH, and pyrE) and RE combinations permitted further identification of 12 strains. By employing additional RE and genes unique to a particular strain, it was possible to identify the rest 6 Staphylococcus aureus strains. This approach has the potential to be utilized for rapid detection of Staphylococcus strains.

Electronic supplementary material

The online version of this article (doi:10.1007/s12088-016-0565-9) contains supplementary material, which is available to authorized users.     

Mineral catalysis of the formation of dimers of 5′-AMP in aqueous solution: The possible role of montmorillonite clays in the prebiotic synthesis of RNA

The reaction of the 5-AMP with water soluble carbodiimide (EDAC) in the presence of Na⁺-montmorillonite 22A results in the formation of 2,5-(pA)₂ (18.9%), 3,5-(pA)₂ (11%), and AppA (4.8%). When poly(U) is used in place of the clay the product yields are 2,5-(pA)₂ (15.5%), 3,5-(pA)₂ (3.7%) and AppA (14.9%). The 3,5-cyclic dinucleotide, 3,5-c(pA)₂, is also formed when poly(U) is used. AppA is the principal reaction product when neither clay nor poly(U) is present in the reaction mixture. Products which contain the phophodiester bond are formed at different ionic strengths, pH and temperatures using Na⁺-montmorillonite. Phosphodiester bond formation was not observed when Cu²⁺-montmorillonite was used or when DISN was used in the place of EDAC. The extent catalysis of phophodiester bond formation varied with the particular clay mineral used. Those Na⁺-clays which bind 5-AMP more strongly are better catalysts. Cu²⁺-montmorillonite, which binds 5-AMP strongly, exhibits no catalytic activity.     

Genome Wide Search for Biomarkers to Diagnose Yersinia Infections

Bacterial identification on the basis of the highly conserved 16S rRNA (rrs) gene is limited by its presence in multiple copies and a very high level of similarity among them. The need is to look for other genes with unique characteristics to be used as biomarkers. Fifty-one sequenced genomes belonging to 10 different Yersinia species were used for searching genes common to all the genomes. Out of 304 common genes, 34 genes of sizes varying from 0.11 to 4.42 kb, were selected and subjected to in silico digestion with 10 different Restriction endonucleases (RE) (4–6 base cutters). Yersinia species have 6–7 copies of rrs per genome, which are difficult to distinguish by multiple sequence alignments or their RE digestion patterns. However, certain unique combinations of other common gene sequences—carB, fadJ, gluM, gltX, ileS, malE, nusA, ribD, and rlmL and their RE digestion patterns can be used as markers for identifying 21 strains belonging to 10 Yersinia species: Y. aldovae, Y. enterocolitica, Y. frederiksenii, Y. intermedia, Y. kristensenii, Y. pestis, Y. pseudotuberculosis, Y. rohdei, Y. ruckeri, and Y. similis. This approach can be applied for rapid diagnostic applications.

Electronic supplementary material

The online version of this article (doi:10.1007/s12088-015-0552-6) contains supplementary material, which is available to authorized users.     

Aniline Tetramer‐Graphene Oxide Composites for High Performance Supercapacitors

Polyaniline (PANI), a promising conducting polymer for supercapacitor, exhibits high specific capacitance and good rate capability. However, it suffers from low cycling stability due to the breakage or scission of polymer chains and loss of contact caused by the volume change during the charge–discharge, as well as the irreversible oxidation and reduction. Here, a strategy for using aniline tetramers loaded on graphene oxide (AT‐GO) is developed to prevent chain breaking and increase the tolerance of volume change. The potential window is also controlled to reduce the irreversible reactions. In a three electrode test, AT‐GO exhibits a good cycling stability with specific capacitance remaining more than 93 to 96% after 2000 cycles. In a two electrode test, the specific capacitance remains 97.7% of its initial specific capacitance after 2000 cycles by suppressing the side reactions. AT‐GO also shows a high specific capacitance of more than 769 F g^?1 at 1 A g^?1 and it remains 581 F g^?1 at 60 A g^?1, suggesting a good rate capability. These results suggest that AT‐GO is a promising electrode material for practical applications.     

RISCI - Repeat Induced Sequence Changes Identifier: a comprehensive,comparative genomics-based, <Emphasis Type="Italic">in silico</Emphasis> subtractive hybridization pipeline to identify repeat induced sequence changes in closely related genomes

Background -  

The availability of multiple whole genome sequences has facilitated in silico identification of fixed and polymorphic transposable elements (TE). Whereas polymorphic loci serve as makers for phylogenetic and forensic analysis, fixed species-specific transposon insertions, when compared to orthologous loci in other closely related species, may give insights into their evolutionary significance. Besides, TE insertions are not isolated events and are frequently associated with subtle sequence changes concurrent with insertion or post insertion. These include duplication of target site, 3' and 5' flank transduction, deletion of the target locus, 5' truncation or partial deletion and inversion of the transposon, and post insertion changes like inter or intra element recombination, disruption etc. Although such changes have been studied independently, no automated platform to identify differential transposon insertions and the associated array of sequence changes in genomes of the same or closely related species is available till date. To this end, we have designed RISCI - 'Repeat Induced Sequence Changes Identifier' - a comprehensive, comparative genomics-based, in silico subtractive hybridization pipeline to identify differential transposon insertions and associated sequence changes using specific alignment signatures, which may then be examined for their downstream effects.     

Codisterol and other Δ5-sterols in the seeds of Cucurbita maxima

A substantial amount (ca 18%) of the sterol found in the seeds of Cucurbita maxima had a Δ-bond and consisted of seven components. They were identified as 25(27)-dehydroporiferasterol, clerosterol, isofucosterol, stigmasterol, sitosterol, campesterol and codisterol. The C-24 configuration of each of the sterols was unequivocally established by a ¹H NMR spectral comparison with authentic standards. This is the first time codisterol has been found in a higher plant and also the first time the structures and configurations of the Δ⁵-sterols from a Cucurbitaceae species have been clearly characterized.     

Accelerating proton spin diffusion in perdeuterated proteins at 100 kHz MAS

Fast magic-angle spinning (>60 kHz) has many advantages but makes spin-diffusion-type proton–proton long-range polarization transfer inefficient and highly dependent on chemical-shift offset. Using 100%-HN-[²H,¹³C,¹⁵N]-ubiquitin as a model substance, we quantify the influence of the chemical-shift difference on the spin diffusion between proton spins and compare two experiments which lead to an improved chemical-shift compensation of the transfer: rotating-frame spin diffusion and a new experiment, reverse amplitude-modulated MIRROR. Both approaches enable broadband spin diffusion, but the application of the first variant is limited due to fast spin relaxation in the rotating frame. The reverse MIRROR experiment, in contrast, is a promising candidate for the determination of structurally relevant distance restraints. The applied tailored rf-irradiation schemes allow full control over the range of recoupled chemical shifts and efficiently drive spin diffusion. Here, the relevant relaxation time is the larger longitudinal relaxation time, which leads to a higher signal-to-noise ratio in the spectra.