Feeding strategies for <Emphasis Type="Italic">E. coli</Emphasis> fermentations demanding an enriched environment

The addition of a carbon nutrient feed to a fed-batch cultivation is often not enough to obtain satisfactory growth and/or production. In some cases, an additional feed with for example supplementary amino acids or complex media is required. This work presents the development of feeding strategies where more than one feed is required and the knowledge of the growth requirements is low. Simulations and cultivations with E. coli are shown using the proposed feed controllers which are based on a probing control concept. The strategies work well and they can be used to shorten the process development phase considerably.     

Bioaugmented sulfur-oxidizing denitrification system with <Emphasis Type="Italic">Alcaligenes defragrans</Emphasis> B21 for high nitrate containing wastewater treatment

The performance of enriched sludge augmented with the B21 strain of Alcaligenes defragrans was compared with that of enriched sludge, as well as with pure Alcaligenes defragrans B21, in the context of a sulfur-oxidizing denitrification (SOD) process. In synthetic wastewater treatment containing 100–1,000 mg NO₃⁻-N/L, the single strain-seeded system exhibited superior performance, featuring higher efficiency and a shorter startup period, provided nitrate loading rate was less than 0.2 kg NO₃⁻-N/m³ per day. At nitrate loading rate of more than 0.5 kg NO₃⁻-N/m³ per day, the bioaugmented sludge system showed higher resistance to shock loading than two other systems. However, no advantage of the bioaugmented system over the enriched sludge system without B21 strain was observed in overall efficiency of denitrification. Both the bioaugmented sludge and enriched sludge systems obtained stable denitrification performance of more than 80% at nitrate loading rate of up to 2 kg NO₃⁻-N/m³ per day.     

A bioactive foam reactor for the removal of volatile organic compounds: system performance and model development

A bioactive foam reactor (BFR), a novel bioreactor operated using surfactant foams and suspended microorganisms for the treatment of gaseous toluene, was investigated to characterize its performance with respect to the mass transfer and biodegradation rates. The BFR system consisted of two reactors in series; a foam column for toluene mass transfer using fine bubbles and a cell reservoir where suspended microorganisms actively biodegraded toluene. In this study, a series of short-term experiments demonstrated that the BFR could achieve stable removal performance and a high elimination capacity (EC) for toluene at 100.3 g/m³/h. A numerical model, combining mass balance equations for the mass transfer and subsequent biodegradation, resulted in reasonable agreement with the experimental findings. At an inlet toluene concentration of 100 ppm_v, the toluene concentration in the liquid phase remained extremely low, indicating that the microbial activity was not hindered in the BFR system. However, the experimental and model prediction results showed that the actual mass of toluene transferred into the liquid phase was not closely balanced with the amount of toluene biodegraded in the BFR used in this study. Consequently, methods, such as increasing the effective volume of the foam column or the mass transfer coefficient, need to be implemented to achieve higher toluene EC and better BFR performance.     

Biotechnological production of lactic acid integrated with fishmeal wastewater treatment by <Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

Fishmeal wastewater, a seafood processing waste, was utilized for production of lactic acid and fungal biomass by Rhizopus oryzae AS 3.254 with the addition of sugars. The 30 g/l exogenous glucose in fishmeal wastewater was superior to starch in view of productivities of lactic acid and fungal biomass, and COD reduction. Fishmeal wastewater can be a replacement for peptone which was the most suitable nitrogen source for lactic acid production among the tested organic or inorganic nitrogen sources. Exogenous NaCl (12 g/l) completely inhibited the production of lactic acid and fungal growth. In the medium of COD 5,000 mg/l fishmeal wastewater with the addition of 30 g/l glucose, the maximum productivity of lactic acid was 0.723 g/l h corresponding to productivity of fungal biomass 0.0925 g/l h, COD reduction 84.9% and total nitrogen removal 50.3% at a fermentation time of 30 h.     

Butanol production from wheat straw hydrolysate using <Emphasis Type="Italic">Clostridium beijerinckii</Emphasis>

In these studies, butanol (acetone butanol ethanol or ABE) was produced from wheat straw hydrolysate (WSH) in batch cultures using Clostridium beijerinckii P260. In control fermentation 48.9 g L⁻¹ glucose (initial sugar 62.0 g L⁻¹) was used to produce 20.1 g L⁻¹ ABE with a productivity and yield of 0.28 g L⁻¹ h⁻¹ and 0.41, respectively. In a similar experiment where WSH (60.2 g L⁻¹ total sugars obtained from hydrolysis of 86 g L⁻¹ wheat straw) was used, the culture produced 25.0 g L⁻¹ ABE with a productivity and yield of 0.60 g L⁻¹ h⁻¹ and 0.42, respectively. These results are superior to the control experiment and productivity was improved by 214%. When WSH was supplemented with 35 g L⁻¹ glucose, a reactor productivity was improved to 0.63 g L⁻¹ h⁻¹ with a yield of 0.42. In this case, ABE concentration in the broth was 28.2 g L⁻¹. When WSH was supplemented with 60 g L⁻¹ glucose, the resultant medium containing 128.3 g L⁻¹ sugars was successfully fermented (due to product removal) to produce 47.6 g L⁻¹ ABE, and the culture utilized all the sugars (glucose, xylose, arabinose, galactose, and mannose). These results demonstrate that C. beijerinckii P260 has excellent capacity to convert biomass derived sugars to solvents and can produce over 28 g L⁻¹ (in one case 41.7 g L⁻¹ from glucose) ABE from WSH. Medium containing 250 g L⁻¹ glucose resulted in no growth and no ABE production. Mixtures containing WSH + 140 g L⁻¹ glucose (total sugar approximately 200 g L⁻¹) showed poor growth and poor ABE production. Mention of trade names or commercial products in this article is solely for the purpose of providing scientific information and does not imply recommendation or endorsement by the United States Department of Agriculture.     

Mrc1, a non-essential DNA replication protein,is required for telomere end protection following loss of capping by Cdc13, Yku or telomerase

Proteins involved in telomere end protection have previously been identified. In Saccharomyces cerevisiae, Cdc13, Yku and telomerase, mainly, prevent telomere uncapping, thus providing telomere stability and avoiding degradation and death by senescence. Here, we report that in the absence of Mrc1, a component of the replication forks, telomeres of cdc13 or yku70 mutants exhibited increased degradation, while telomerase-negative cells displayed accelerated senescence. Moreover, deletion of MRC1 increased the single-strandedness of the telomeres in cdc13-1 and yku70Δ mutant strains. An mrc1 deletion strain also exhibited slight but stable telomere shortening compared to a wild-type strain. Loss of Mrc1’s checkpoint function alone did not provoke synthetic growth defects in combination with the cdc13-1 mutation. Combinations between the cdc13-1 mutation and deletion of either TOF1 or PSY2, coding for proteins physically interacting with Mrc1, also resulted in a synthetic growth defect. Thus, the present data suggest that non-essential components of the DNA replication machinery, such as Mrc1 and Tof1, may have a role in telomere stability in addition to their role in fork progression.     

Identification of functional candidate genes for drought tolerance in rice

Drought tolerance (DT) in rice is known to be controlled by many quantitative trait loci (QTLs) and involved differential expression of large numbers of genes, but linking QTLs with their underlying genes remains the most challenging issue in plant molecular biology. To shed some light on this issue, differential gene expression in response to PEG simulated drought in 3 unique genetic materials (a lowland rice, IR64 and its derived line, PD86 which has 11 introgressed DT QTLs, and a upland rice IRAT109) was investigated using a PCR-based subtractive hybridization strategy. More than 300 unique subtracted cDNA sequences, covering genes of diverse cellular activities and functions, were identified and confirmed by semi-quantitative and quantitative RT-PCR. Detailed bioinformatics analyses of the data revealed two interesting results. First, the levels and mechanisms of DT of the three rice lines were associated with the number and types of differentially expressed genes, suggesting different DT mechanisms in rice are controlled by different sets of genes and different metabolic pathways, and most differentially expressed genes under drought were able to contribute to DT. Second, there appeared a high correspondence in genomic location between DT QTLs and clusters of differentially expressed genes in rice, suggesting some DT QTLs may represent clusters of co-regulated and functionally related genes. Thus, differential gene expression analyses using genetically characterized materials can provide additional insights into the molecular basis of QTLs and convergent evidence to shortlist the candidate genes for target QTLs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. Bin-Ying Fu and Jian-Hua Xiong are contributed to this work equally.     

<Emphasis Type="Italic">Drosophila</Emphasis> retinophilin contains MORN repeats and is conserved in humans

The function of conserved novel human genes can be efficiently addressed in genetic model organisms. From a collection of genes expressed in the Drosophila visual system, cDNAs expressed in vertebrates were identified and one similar to a novel human gene was chosen for further investigation. The results reported here characterize the Drosophila retinophilin gene and demonstrate that a similar gene is expressed in the human retina. The Drosophila and human retinophilin sequences are 50% identical, and they share an additional 16% conserved substitutions. Examination of the cDNA and genomic sequence indicates that it corresponds to the gene CG10233 of the annotated genome and predicts a 22.7 kDa protein. Polyclonal antibodies generated to a predicted retinophilin peptide recognize an antigen in Drosophila photoreceptor cells. The retinophilins encode 4 copies of a repeat associated with a Membrane Occupation and Recognition Nexus (MORN) function first discovered in junctophilins, which may interact with the plasma membrane. These results therefore show that Drosophila retinophilin is expressed in fly photoreceptor cells, demonstrate that a conserved human gene is expressed in human retina, and suggest that a mutational analysis of the Drosophila gene would be valuable.     

Introducing mesoscopic information into constitutive equations for arterial walls

We propose a new elastic constitutive law for arterial tissue in which the limiting polymeric chain extensibility of both collagen and elastin fibres is accounted for. The elastic strain-energy function is separated additively into two parts: an isotropic contribution associated with the matrix (incorporating the elastin fibre network) and an anisotropic one associated with the collagen fibres. Information on the limiting extensibility in each case provides some mesoscopic input into the model. The (logarithm-based) model is compared with the Fung-Demiray exponential model and certain other recently proposed models. Some aspects of the elastic response under extension and inflation of a thin-walled circular cylindrical tube (the artery) are then examined and compared with the corresponding response of a rubber-like tube. We point out that our model, when both isotropic and anisotropic terms are included, can be developed to accommodate changing mechanical properties associated with degradation of the elastin and collagen by considering the material constants that define the limit of chain extensibility to evolve in time.