Inhibitors of the molybdenum cofactor containing 4-hydroxybenzoyl-CoA reductase

4-Hydroxybenzoyl-CoA reductase (4-HBCR) is a member of the xanthine oxidase (XO) family of molybdenum cofactor containing enzymes and catalyzes the irreversible removal of a phenolic hydroxy group by reduction, yielding benzoyl-CoA and water. In this work the effects of various activity modulating compounds were characterized by kinetic, electron paramagnetic resonance (EPR) spectroscopic, and X-ray crystallographic studies. 4-HBCR was readily inactivated by cyanide and by the reducing agents titanium(III) citrate and dithionite; in contrast, reduced viologens had no inhibitory effect. Cyanide inhibition occurred in both the oxidized and reduced state of 4-HBCR. In the reduced state, cyanide-inhibited 4-HBCR was reactivated by simple oxidation. In contrast, reactivation from the oxidized state was only achieved in the presence of sulfide. Dithionite-inhibited 4-HBCR was reactivated by oxidation, whereas inhibition by titanium(III) citrate was irreversible. The previously reported inhibitory effect of azide could not be confirmed; instead, azide rather protected the enzyme from inactivation by titanium(III) citrate. The EPR spectra of the Mo(V) states were nearly identical in the noninhibited methyl viologen and in the dithionite-inhibited states of 4-HBCR; they exhibited a hyperfine splitting due to magnetic coupling with two solvent-exchangeable protons. The cyanide-treated enzyme showed the typical desulfo-inhibited Mo(V) EPR signal in D 2O, whereas in H 2O the hyperfine splitting was altered but indicated no loss of Mo(V)-proton interactions. The structures of dithionite- and azide-bound 4-HBCR were solved at 2.1 and 2.2 A, respectively. Both dithionite and azide bound directly to equatorial ligation sites of the Mo atom. The results obtained revealed further insights into the active site of an unusual member of the XO family of molybdenum cofactor containing enzymes.     

Inverted Semi‐transparent Polymer Solar Cells with Transparency Color Rendering Indices approaching 100

Window‐ or building‐integrated semi‐transparent solar cells are particularly interesting applications for organic photovoltaic devices. In this work, we present an easy‐to‐process inverted device architecture comprising fully solution processable poly(3,4‐ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) bilayer top‐electrodes for efficient semi‐transparent organic solar cells. By incorporating dyes with a complementary absorption to the light harvesting polymer poly[[9‐(1‐octylnonyl)‐9H‐carbazole‐2,7‐diyl]‐2,5‐thiophenediyl‐2,1,3‐benzothiadiazole‐4,7‐diyl‐2,5‐thiophenediyl] (PCDTBT) into the PEDOT:PSS electrode, we achieve fully color neutral transparency perception and a color rendering index approaching 100. This makes the devices suitable for applications such as window shadowing or the integration into overhead glazing.     

In Situ Formation of MoO3 in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells

A solution‐processed neutral hole transport layer is developed by in situ formation of MoO₃ in aqueous PEDOT:PSS dispersion (MoO₃‐PEDOT:PSS). This MoO₃‐PEDOT:PSS composite film takes advantage of both the highly conductive PEDOT:PSS and the ambient conditions stability of MoO₃; consequently it possesses a smooth surface and considerably reduced hygroscopicity. The resulting bulk heterojunction polymer solar cells (BHJ PSC) based on poly[2,3‐bis‐(3‐octyloxyphenyl)quinoxaline‐5,8‐diyl‐alt‐thiophene‐2,5‐diyl] (TQ1):[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₀BM) blends using MoO₃‐PEDOT:PSS composite film as hole transport layer (HTL) show considerable improvement in power conversion efficiency (PCE), from 5.5% to 6.4%, compared with the reference pristine PEDOT:PSS‐based device. More importantly, the device with MoO₃‐PEDOT:PSS HTL shows considerably improved stability, with the PCE remaining at 80% of its original value when stored in ambient air in the dark for 10 days. In comparison, the reference solar cell with PEDOT:PSS layer shows complete failure within 10 days. This MoO₃‐PEDOT:PSS implies the potential for low‐cost roll‐to‐roll fabrication of high‐efficiency polymer solar cells with long‐term stability at ambient conditions.     

In Vitro Reconstitution of Yeast tUTP/UTP A and UTP B Subcomplexes Provides New Insights into Their Modular Architecture

Eukaryotic ribosome biogenesis is a multistep process involving more than 150 biogenesis factors, which interact transiently with pre-ribosomal particles to promote their maturation. Some of these auxiliary proteins have been isolated in complexes found separate from the ribosomal environment. Among them, are 3 large UTP subcomplexes containing 6 or 7 protein subunits which are involved in the early steps of ribosome biogenesis. The composition of the UTP subcomplexes and the network of binary interactions between protein subunits have been analyzed previously. To obtain further insights into the structural and biochemical properties of UTP subcomplexes, we established a heterologous expression system to allow reconstitution of the yeast tUTP/UTP A and UTP B subcomplexes from their candidate subunits. The results of a series of reconstitution experiments involving different combinations of protein subunits are in good agreement with most of the previously observed binary interactions. Moreover, in combination with additional biochemical analyses, several stable building blocks of the UTP subcomplexes were identified. Based on these findings, we present a refined model of the tUTP/UTP A and UTP B architecture.     

Mean-variance performance optimization of response time in a tandem router network with batch arrivals

The end-to-end performance of a simple wireless router network with batch arrivals is optimized in an M/G/1 queue-based, analytical model. The optimization minimizes both the mean and variance of the transmission delay (or ‘response time’), subject to an upper limit on the rate of losses and finite capacity queueing and recovery buffers. Losses may be due to either full buffers or corrupted data. The queueing model is also extended to higher order moments beyond the mean and variance of the response time. The trade-off between mean and variance of response time is assessed and the optimal ratio of arrival-buffer size to recovery-buffer size is determined, which is a critical quantity, affecting both loss rate and transmission time. Graphs illustrate performance in the near-optimal region of the critical parameters. Losses at a full buffer are inferred by a time-out whereas corrupted data is detected immediately on receipt of a packet at a router, causing a N-ACK to be sent upstream. Recovery buffers hold successfully transmitted packets so that on receiving a N-ACK, the packet, if present, can be retransmitted, avoiding an expensive resend from source. The impact of the retransmission probability is investigated similarly: too high a value leads to congestion and so higher response times, too low and packets are lost forever.

Dynamics of seedling growth acclimation towards altered light conditions can be quantified via GROWSCREEN: a setup and procedure designed for rapid optical phenotyping of different plant species

Using a novel setup, we assessed how fast growth of Nicotiana tabacum seedlings responds to alterations in the light regime and investigated whether starch-free mutants of Arabidopsis thaliana show decreased growth potential at an early developmental stage. Leaf area and relative growth rate were measured based on pictures from a camera automatically placed above an array of 120 seedlings. Detection of total seedling leaf area was performed via global segmentation of colour images for preset thresholds of the parameters hue, saturation and value. Dynamic acclimation of relative growth rate towards altered light conditions occurred within 1 d in N. tabacum exposed to high nutrient availability, but not in plants exposed to low nutrient availability. Increased leaf area was correlated with an increase in shoot fresh and dry weight as well as root growth in N. tabacum. Relative growth rate was shown to be a more appropriate parameter than leaf area for detection of dynamic growth acclimation. Clear differences in leaf growth activity were also observed for A. thaliana. As growth responses are generally most flexible in early developmental stages, the procedure described here is an important step towards standardized protocols for rapid detection of the effects of changes in internal (genetic) and external (environmental) parameters regulating plant growth.     

Reactive Balance Control in Response to Perturbation in Unilateral Stance: Interaction Effects of Direction,Displacement and Velocity on Compensatory Neuromuscular and Kinematic Responses

Unexpected sudden perturbations challenge postural equilibrium and require reactive compensation. This study aimed to assess interaction effects of the direction, displacement and velocity of perturbations on electromyographic (EMG) activity, centre of pressure (COP) displacement and joint kinematics to detect neuromuscular characteristics (phasic and segmental) and kinematic strategies of compensatory reactions in an unilateral balance paradigm. In 20 subjects, COP displacement and velocity, ankle, knee and hip joint excursions and EMG during short (SLR), medium (MLR) and long latency response (LLR) of four shank and five thigh muscles were analysed during random surface translations varying in direction (anterior-posterior (sagittal plane), medial-lateral (frontal plane)), displacement (2 vs. 3cm) and velocity (0.11 vs. 0.18m/s) of perturbation when balancing on one leg on a movable platform. Phases: SLR and MLR were scaled to increased velocity (P<0.05); LLR was scaled to increased displacement (P<0.05). Segments: phasic interrelationships were accompanied by segmental distinctions: distal muscles were used for fast compensation in SLR (P<0.05) and proximal muscles to stabilise in LLR (P<0.05). Kinematics: ankle joints compensated for both increasing displacement and velocity in all directions (P<0.05), whereas knee joint deflections were particularly sensitive to increasing displacement in the sagittal (P<0.05) and hip joint deflections to increasing velocity in the frontal plane (P<0.05). COP measures increased with increasing perturbation velocity and displacement (P<0.05). Interaction effects indicate that compensatory responses are based on complex processes, including different postural strategies characterised by phasic and segmental specifications, precisely adjusted to the type of balance disturbance. To regain balance after surface translation, muscles of the distal segment govern the quick regain of equilibrium; the muscles of the proximal limb serve as delayed stabilisers after a balance disturbance. Further, a kinematic distinction regarding the compensation for balance disturbance indicated different plane- and segment-specific sensitivities with respect to the determinants displacement and velocity.