A Familial Factor Independent of CAG Repeat Length Influences Age at Onset of Machado-Joseph Disease

Machado-Joseph disease (MJD) is a late-onset, progressive, neurodegenerative disorder caused by the expansion of an unstable trinucleotide (CAG) repeat sequence in a novel gene (MJD1) on chromosome 14. Previous studies showed that age at onset is negatively correlated with the number of CAG repeat units, but only part of the variation in onset age is explained by CAG repeat length. Ages at onset and CAG repeat lengths of 136 MJD patients from 23 kindreds of Portuguese descent were analyzed, to determine whether familial factors independent of CAG repeat length modulate age at onset of MJD. Correlation among sibs for onset age adjusted for CAG repeat length was .43, which indicates that an environmental or genetic factor common to sibs influences onset age. Positive correlations were also observed for avuncular (r = .22) and first-cousin pairs (r = .28), which supports the hypothesis that a genetic factor is influencing age at onset. Commingling analysis of onset ages adjusted for CAG repeat length identified three distributions in this population of affected individuals. Further studies of a much larger sample are needed to determine whether these distributions represent the influence of a genetic or environmental factor.     

Purification and characterization of a fibrinolytic enzyme produced from Bacillus sp. strain CK 11-4 screened from Chungkook-Jang.

Bacillus sp. strain CK 11-4, which produces a strongly fibrinolytic enzyme, was screened from Chungkook-Jang, a traditional Korean fermented-soybean sauce. The fibrinolytic enzyme (CK) was purified from supernatant of Bacillus sp. strain CK 11-4 culture broth and showed thermophilic, hydrophilic, and strong fibrinolytic activity. The optimum temperature and pH were 70 degrees C and 10.5, respectively, and the molecular weight was 28,200 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The first 14 amino acids of the N-terminal sequence of CK are Ala-Gin-Thr-Val-Pro-Tyr-Gly-Ile-Pro-Leu-Ile-Lys-Ala-Asp. This sequence is identical to that of subtilisin Carlsberg and different from that of nattokinase, but CK showed a level of fibrinolytic activity that was about eight times higher than that of subtilisin Carlsberg. The amidolytic activity of CK increased about twofold at the initial state of the reaction when CK enzyme was added to a mixture of plasminogen and substrate (H-D-Val-Leu-Lys-pNA). A similar result was also obtained from fibrin plate analysis.     

Nonradioactive method to study genetic profiles of natural bacterial communities by PCR-single-strand-conformation polymorphism.

We describe a new method for studying the structure and diversity of bacterial communities in the natural ecosystem. Our approach is based on single-strand-conformation polymorphism (SSCP) analysis of PCR products of 16S rRNA genes from complex bacterial populations. A pair of eubacterial universal primers for amplification of the variable V3 region were designed from the 16S rRNA sequences of 1,262 bacterial strains. The PCR conditions were optimized by using genomic DNAs from five gram-positive and seven gram-negative strains. The SSCP analysis of the PCR products demonstrated that a bacterial strain generated its characteristic band pattern and that other strains generated other band patterns, so that the relative diversity in bacterial communities could be measured. In addition, this method was sensitive enough to detect a bacterial population that made up less than 1.5% of a bacterial community. The distinctive differences between bacterial populations were observed in an oligotrophic lake and a eutrophic pond in a field study. The method presented here, using combined PCR amplification and SSCP pattern analyses of 16S rRNA genes, provides a useful tool to study bacterial community structures in various ecosystems.     

Characterization of an oxygen-dependent inducible promoter system, the nar promoter, and Escherichia coli with an inactivated nar operon

The nar promoter of Escherichia coli, which is maximally induced under anaerobic conditions in the presence of nitrate, was characterized to see whether the nar promoter cloned onto pBR322 can be used as an inducible promoter. To increase the expression level, the nar promoter was expressed in E. coli where active nitrate reductase cannot be expressed from the nar operon on the chromosome. A plasmid with the lacZ gene expressing beta-galactosidase instead of the structural genes of the nar operon was used to simplify an assay of induction of the nar promoter. The following effects were investigated to find optimal conditions: methods of inducing the nar promoter, optimal nitrate and molybdate concentrations maximally inducing the nar promoter, the amount of expressed beta-galactosidase, and induction ratio (specific beta-galactosidase activity after maximal induction/specific beta-galactosidase activity before induction.)The following results were obtained from the experiments: induction of the nar promoter was optimal when E. coli was grown in the presence of 1% nitrate at the beginning of culture; expression of beta-galactosidase was not affected by molybdate; the induction ratio was maximal, approximately 300, when the overnight culture was grown in the flask for 2.5 h (OD(600) is congruent to 1.3) before being transferred to the fermentor; the amount of beta-galactosidase per cell and per medium volume was maximal when E. coli was grown under aerobic conditions to OD(600) = 1.7; then the nar promoter was induced under microaerobic conditions made by lowering dissolved oxygen level (DO) to 1-2%. After approximately 6 h of induction, OD(600) became 3.2 and specific beta-galactosidase activity became 36,000 Miller units, equivalent to 35% of total cellular proteins, which was confirmed from sodium dodecyl sulfate-polyacrylamide gel electrophoresis. (c) 1996 John Wiley & Sons, Inc.     

Gated conductances in native and reconstituted membranes from frog olfactory cilia.

Although cAMP is well established as a second messenger for olfactory transduction in vertebrates, the role of inositol 1,4,5-trisphosphate (IP3) in this process remains controversial. We addressed this issue by comparing currents evoked by cAMP and IP3 in native and reconstituted membranes from olfactory cilia. We detected only a cyclic nucleotide-gated conductance in the native membrane but both cyclic nucleotide-gated and IP3-gated conductances in the reconstituted membrane. The magnitudes of the cyclic nucleotide- and IP3-gated conductances were not correlated with each other in reconstituted membranes, suggesting that cyclic nucleotide- and IP3-gated channels originate in different cellular compartments.     

Synthesis of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) by recombinant Escherichia coli

Several recombinant Escherichia coli strains, including XL1-Blue, JM109, HB101, and DH5alpha harboring a stable high-copynumber plasmid pSYL105 containing the Alcaligenes eutrophus polyhydroxyalkanoate (PHA) biosynthesis genes were constructed. These recombinant strains were examined for their ability to synthesize and accumulate poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] copolymer from glucose and either propionate or valerate. All recombinant E. coli strains could synthesize the P(3HB-co-3HV) copolymer in the medium containing glucose and propionate. However, only the homopolymer poly-(3-hydroxybutyrate) [P(3HB)] was synthesized from glucose and valerate. The PHA concentration and the 3HV fraction could be increased by inducing with acetate and/or oleate. When supplemented with oleate, the 3HV fraction increased by fourfold compared with that obtained without induction. Induction with propionate resulted in lower PHA concentration due to the inhibitory effect, but an 3HV fraction of as high as 33.0% could be obtained. These results suggest that P(3HB-co-3HV) can be efficiently produced from propionate by recombinant E. coli by inducing with acetate, propionate, or oleate. (c) 1996 John Wiley & Sons, Inc.     

The effect of rebamipide on gastric xanthine oxidase activity and type conversion in ethanol-treated rats

Rebamipide, a novel antipeptic ulcer drug, 2-(4-chlorobenzoylamino)-3-[2(1H)-quinolinone-4-yl]-propionic acid, was studied for its inhibitory effect on gastric xanthine oxidase activity and type conversion of the enzyme that has a profound role in free radical generation. Intraperitoneal administration of rebamipide at 60 mg/kg body weight reduced gastric mucosal hemorrhagic lesions and lipid peroxidation, which was proportional to the inhibitory effect of rebamipide on alcohol-induced xanthine oxidase-type conversion and enzyme activity. It was also observed that the activity of xanthine oxidase was significantly inhibited by administration of rebamipide at 60 mg/kg body weight, leading to a significant reduction of lipid peroxide content in alcohol-treated rats. The results suggest that alcohol-induced gastric mucosal lesions might be, in part, due to the increased activity of xanthine oxidase and type conversion rate of the enzyme and the protective effect of rebamipide on gastric mucosal lesions would result from its ability to protect against oxidative stress on gastric mucosal lesions of alcohol-treated rats.     

Biodegradation of the mixtures of 4-chlorophenol and phenol by Comamonas testosteroni CPW301

A 4-chlorophenol (4-CP)-degrading bacterium, strain CPW301, was isolated from soil and identified as Comamonas testosteroni. This strain dechlorinated and degraded 4-CP via a meta-cleavage pathway. CPW301 could also utilize phenol as a carbon and energy source without the accumulation of any metabolites via the same meta-cleavage pathway. When phenol was added as a additional substrate, CPW301 could degrade 4-CP and phenol simultaneously. The addition of phenol greatly accelerated the degradation of 4-CP due to the increased cell mass. The simultaneous degradation of the 4-CP and phenol is useful not only for enhanced cell growth but also for the bioremediation of both compounds, which are normally present in hazardous waste sites as a mixture.     

Uptake and transformation of metals and metalloids by microbial mats and their use in bioremediation

Summary Constructed microbial mats, used for studies on the removal and transformation of metals and metalloids, are made by combining cyanobacteria inoculum with a sediment inoculum from a metal-contaminated site. These mats are a heterotrophic and autotrophic community dominated by cyanobacteria and held together by slimy secretions produced by various microbial groups. When contaminated water containing high concentrations of metals is passed over microbial mats immobilized on glass wool, there is rapid removal of the metals from the water. The mats are tolerant of high concentrations of toxic metals and metalloids, such as cadmium, lead, chromium, selenium and arsenic (up to 350 mg L^–1). This tolerance may be due to a number of mechanisms at the molecular, cellular and community levels. Management of toxic metals by the mats is related to deposition of metal compounds outside the cell surfaces as well as chemical modification of the aqueous environment surrounding the mats. The location of metal deposition is determined by factors such as redox gradients, cell surface micro-environments and secretion of extra-cellular bioflocculents. Metal-binding flocculents (polyanionic polysaccharides) are produced in large quantities by the cyanobacterial component of the mat. Steep gradients of redox and oxygen exist from the surface through the laminated strata of microbes. These are produced by photosynthetic oxygen production at the surface and heterotrophic consumption in the deeper regions. Additionally, sulfur-reducing bacteria colonize the lower strata, removing and utilizing the reducing H₂S, rather than water, for photosynthesis. Thus, depending on the chemical character of the microzone of the mat, the sequestered metals or metalloids can be oxidized, reduced and precipitated as sulfides or oxides. For example precipitates of red amorphous elemental selenium were identified in mats exposed to selenate (Se-VI) and insoluble precipitates of manganese, chromium, cadmium, cobalt, and lead were found in mats exposed to soluble salts of these metals. Constructed microbial mats offer several advantages for use in the bioremediation of metal-contaminated sites. These include low cost, durability, ability to function in both fresh and salt water, tolerance to high concentrations of metals and metalloids and the unique capacity of mats to form associations with new microbial species. Thus one or several desired microbial species might be integrated into mats in order to design the community for specific bioremediation applications.