Microheterogeneity controls the rate of gelation of actin filament networks

Rapid sol-gel transitions of the actin cytoskeleton are required for many key cellular processes, including cell spreading and cell locomotion. Actin monomers assemble into semiflexible polymers that rapidly intertwine into a network, a process that in vitro takes approximately 1 min for an actin concentration of 1 mg/ml. The same actin filament network, however, takes approximately 1 h to exhibit a steady-state elasticity. We hypothesize that the slow gelation of F-actin is due to the slow establishment of a homogeneous meshwork. Using a novel method, time-resolved multiple particle tracking, which monitors the range of thermally excited displacements of microspheres imbedded in the network, we show that the increase in elasticity in a polymerizing solution of actin parallels the progressive decline of the network microheterogeneity. The rates of gelation and network homogenization slightly decrease with actin concentration and in the presence of the F-actin cross-linking proteins alpha-actinin and fascin, whereas the rate of actin polymerization increases dramatically with actin concentration. Our measurements show that the slow spatial homogenization of the actin filament network, not actin polymerization or the formation of polymer overlaps, is the rate-limiting step in the establishment of an elastic actin network and suggest that a new activity of F-actin binding proteins may be required for the rapid formation of a homogeneous stiff gel.     

Expression and self-assembly of norwalk virus capsid protein from venezuelan equine encephalitis virus replicons

The Norwalk virus (NV) capsid protein was expressed using Venezuelan equine encephalitis virus replicon particles (VRP-NV1). VRP-NV1 infection resulted in large numbers of recombinant NV-like particles that were primarily cell associated and were indistinguishable from NV particles produced from baculoviruses. Mutations located in the N-terminal and P1 domains of the NV capsid protein ablated capsid self-assembly in mammalian cells.     

Microheterogeneity and microrheology of wheat gliadin suspensions studied by multiple-particle tracking

By monitoring the thermally driven displacements of imbedded polystyrene microspheres via video fluorescence microscopy, we quantified the microstructural and micromechanical heterogeneities of wheat gliadin suspensions. We found that the degree of heterogeneity of the suspensions, as measured by the width and skewness of the microspheres' mean squared displacement (MSD) distribution, increased dramatically over a narrow range of gliadin concentrations. The ensemble-averaged MSD of a 250 mg/mL gliadin suspension exhibited a power-law behavior scaling linearly with time, a behavior similar to that observed for a homogeneous aqueous glycerol solution. However, the MSD distribution was wider and more asymmetric than for glycerol. With increasing concentration of gliadin, the ensemble-averaged MSD rapidly displayed a plateau at small time scales, the MSD distribution became wider and more asymmetric, and the local viscoelastic moduli extracted from multiple-particle-tracking measurements showed an increasingly wide range.     

Sequence and phylogenetic analyses of the twin-arginine targeting (Tat) protein export system

Twin-arginine targeting (Tat) protein secretion systems consist of two protein types, members of the TatA and TatC families. Homologues of these proteins are found in many archaea, bacteria, chloroplasts and mitochondria. Every prokaryotic organism with a fully sequenced genome exhibits either neither family member, or between one and three paralogues of these two family members. The Arabidopsis thaliana genome encodes three of each. Although many mitochondrially encoded TatC homologues have been identified, corresponding TatA homologues have not been found in this organelle. Phylogenetic analyses reveal that most prokaryotic Tat systems consist of one TatC homologue and two sequence-divergent TatA homologues (TatA and TatB). When only one TatA homologue is present, TatB is missing, and when three TatA homologues are present, the third one arose by duplication of TatA, not TatB. Further, homologues most resembling TatB are more sequence-divergent than those more closely resembling TatA. In contrast to the TatA family, the TatC family shows phylogenetic clustering in strict accordance with organismal type. These results are discussed in terms of their probable structural, functional and evolutionary significance.     

Micromechanical coupling between cell surface receptors and RGD peptides

Contact between an adherent cell and the extracellular matrix (ECM) promotes the recruitment of structural and signaling molecules to the cytoplasmic domain of integrins, which mediate cell adhesion, cell migration, and cell growth. It is unclear whether the intracellular recruitment of these cytoplasmic molecules enhances the affinity between the ECM and the extracellular domain of the cell surface receptors (integrins). Using soft microneedles coated with Arg-Gly-Asp (RGD) peptides, a sequence commonly shared by ECM proteins, we apply a localized ramp shear stress to the surface of a HeLa cell and measure the cell stiffness and the collective (or apparent) unbinding lifetime of its surface receptors to RGD. These measurements demonstrate that both cell stiffness and the collective cell surface receptor-RGD unbinding lifetime increase with the duration of the pre-shear cell-microneedle contact and with the rate of shear applied to the cell membrane. These parameters are also crucially dependent on the integrity of the actin filament network. Our results are consistent with a model of positive feedback signaling where RGD-mediated initial recruitment of cytoskeletal proteins to the cytoplasmic domain of integrins directly enhances the interaction between the extracellular domain of integrins and the RGD sequence of ECM molecules.     

Mutation in the Xanthomonas campestris xanA gene required for synthesis of xanthan and lipopolysaccharide drastically reduces the efficiency of bacteriophage (phi)L7 adsorption

(Phi)L7 is a lytic phage infecting the gram-negative Xanthomonas campestis pv. campestris, a plant pathogen. To study phage-host interaction, a (phi)L7-resistant mutant was isolated from strain Xc17 by mini-Tn5 transposition and designated CH7LR. CH7LR could not plate (phi)L7 in double-layered assay and formed turbid clearing zones when the cell lawn was dropped with a high titer of (phi)L7. Sequence analysis showed that the mutated gene is xanA coding for phosphoglucomutase/phosphomannomutase, required for the synthesis of lipopolysaccharide and exopolysaccharide (xanthan). The involvement of xanA was confirmed by isolating another mutant with interrupted xanA and complementing with the cloned wild-type gene. Nonmucoid mutants are still sensitive to (phi)L7, indicating that xanthan is not involved in (phi)L7 adsorption. Since the mutants still exhibited low efficiencies of phage adsorption, we predict, by analogy with the cases in other bacteriophages of gram-negative bacteria, that other outer membrane components such as a protein are required for the formation of a complex receptor.     

Micromechanical mapping of live cells by multiple-particle-tracking microrheology

This paper introduces the method of live-cell multiple-particle-tracking microrheology (MPTM), which quantifies the local mechanical properties of living cells by monitoring the Brownian motion of individual microinjected fluorescent particles. Particle tracking of carboxylated microspheres imbedded in the cytoplasm produce spatial distributions of cytoplasmic compliances and frequency-dependent viscoelastic moduli. Swiss 3T3 fibroblasts are found to behave like a stiff elastic material when subjected to high rates of deformations and like a soft liquid at low rates of deformations. By analyzing the relative contributions of the subcellular compliances to the mean compliance, we find that the cytoplasm is much more mechanically heterogeneous than reconstituted actin filament networks. Carboxylated microspheres embedded in cytoplasm through endocytosis and amine-modified polystyrene microspheres, which are microinjected or endocytosed, often show directed motion and strong nonspecific interactions with cytoplasmic proteins, which prevents computation of local moduli from the microsphere displacements. Using MPTM, we investigate the mechanical function of alpha-actinin in non-muscle cells: alpha-actinin-microinjected cells are stiffer and yet mechanically more heterogeneous than control cells, in agreement with models of reconstituted cross-linked actin filament networks. MPTM is a new type of functional microscopy that can test the local, rate-dependent mechanical and ultrastructural properties of living cells.     

Enhanced purification of plasmid DNA using Q-Sepharose by modulation of alcohol concentrations

Ion-exchange chromatography is one of the most commonly used methods for plasmid preparation. In this study a modified method was used to purify plasmid from bacterial lysate using Q-Sepharose. Incorporation of alcohols into the washing buffers enhanced the separation of plasmid from RNA and proteins. The use of isopropanol and ethanol achieved a high yield and purity whereas the use of methanol failed to improve the plasmid purification using Q-Sepharose by batch adsorption-desorption. Stepwise elution containing various concentrations of isopropanol and NaCl was used in preparative chromatography to enhance the plasmid purification. The same stepwise elution was applied to the chromatography columns packed with 0.5, 20, and 200 ml of Q-Sepharose for plasmid purification from 7.5, 300, and 3000 ml bacterial broth, respectively. Complete separation of DNA from RNA and proteins was achieved under gravity flow by modulation of the alcohol concentrations in the stepwise elution. These three scales of chromatography maintained an approximate plasmid yield and the purified plasmid contained undetectable levels of RNA and protein.