Response to genomic selection: The Bulmer effect and the potential of genomic selection when the number of phenotypic records is limiting

Background

Over the last ten years, genomic selection has developed enormously. Simulations and results on real data suggest that breeding values can be predicted with high accuracy using genetic markers alone. However, to reach high accuracies, large reference populations are needed. In many livestock populations or even species, such populations cannot be established when traits are difficult or expensive to record, or when the population size is small. The value of genomic selection is then questionable.

Methods

In this study, we compare traditional breeding schemes based on own performance or progeny information to genomic selection schemes, for which the number of phenotypic records is limiting. Deterministic simulations were performed using selection index theory. Our focus was on the equilibrium response obtained after a few generations of selection. Therefore, we first investigated the magnitude of the Bulmer effect with genomic selection.

Results

Results showed that the reduction in response due to the Bulmer effect is the same for genomic selection as for selection based on traditional BLUP estimated breeding values, and is independent of the accuracy of selection. The reduction in response with genomic selection is greater than with selection based directly on phenotypes without the use of pedigree information, such as mass selection. To maximize the accuracy of genomic estimated breeding values when the number of phenotypic records is limiting, the same individuals should be phenotyped and genotyped, rather than genotyping parents and phenotyping their progeny. When the generation interval cannot be reduced with genomic selection, large reference populations are required to obtain a similar response to that with selection based on BLUP estimated breeding values based on own performance or progeny information. However, when a genomic selection scheme has a moderate decrease in generation interval, relatively small reference population sizes are needed to obtain a similar response to that with selection on traditional BLUP estimated breeding values.

Conclusions

When the trait of interest cannot be recorded on the selection candidate, genomic selection schemes are very attractive even when the number of phenotypic records is limited, because traditional breeding requires progeny testing schemes with long generation intervals in those cases.     

Relationship of aerobic and anaerobic parameters with 400 m front crawl swimming performance

The aims of the present study were to investigate the relationship of aerobic and anaerobic parameters with 400 m performance, and establish which variable better explains long distance performance in swimming. Twenty-two swimmers (19.1±1.5 years, height 173.9±10.0 cm, body mass 71.2±10.2 kg; 76.6±5.3% of 400 m world record) underwent a lactate minimum test to determine lactate minimum speed (LMS) (i.e., aerobic capacity index). Moreover, the swimmers performed a 400 m maximal effort to determine mean speed (S400m), peak oxygen uptake (V.O2PEAK) and total anaerobic contribution (C_ANA). The C_ANA was assumed as the sum of alactic and lactic contributions. Physiological parameters of 400 m were determined using the backward extrapolation technique (V.O2PEAK and alactic contributions of C_ANA) and blood lactate concentration analysis (lactic anaerobic contributions of C_ANA). The Pearson correlation test and backward multiple regression analysis were used to verify the possible correlations between the physiological indices (predictor factors) and S400m (independent variable) (p < 0.05). Values are presented as mean ± standard deviation. Significant correlations were observed between S400m (1.4±0.1 m·s^-1) and LMS (1.3±0.1 m·s^-1; r = 0.80), V.O2PEAK (4.5±3.9 L·min^-1; r = 0.72) and C_ANA (4.7±1.5 L·O₂; r= 0.44). The best model constructed using multiple regression analysis demonstrated that LMS and V.O2PEAK explained 85% of the 400 m performance variance. When backward multiple regression analysis was performed, C_ANA lost significance. Thus, the results demonstrated that both aerobic parameters (capacity and power) can be used to predict 400 m swimming performance.     

The genus Teliocrinus (Crinoidea,Echinodermata): a key taxon among pentacrinid stalked crinoids

The main characters of the stalked crinoids of the family Pentacrinitidae attributed to the genus Teliocrinus are re‐evaluated from a quantitative study of phenotype variation, new observations on arm and stalk articulations, and observation of ontogenetic trends. All of the specimens collected in the northern Indian Ocean belong to the same species, i.e. Teliocrinus springeri (Clark, 1909). However, two phenotypes living at different depths remain valid as subspecies: Teliocrinus springeri springeri (Clark, 1909) and Teliocrinus springeri liliaceus (Clark, 1909). Teliocrinus shares several ontogenetic trends with Endoxocrinus, especially in nonfunctional brachial articulations and stalk symplexies. Its assignment to the Diplocrininae is confirmed. A discussion of its affinities with pentacrinid fossil genera in which the crown is well preserved suggests that Diplocrininae could have first appeared during the Lower Cretaceous. A shortening of brachitaxes and a paedomorphic trend of stalk symplexies are the main other evolutionary traits. Nonfunctional articulations are frequently found at the paedomorphic pole of the heterochronic gradient, without clear derived characters. Classification of pentacrinids mainly based on such symplesiomorphy or paedomorphic characters must be definitively abandoned. However, in post‐Palaeozoic stalked crinoids the scarcity of well‐preserved fossils, the high frequency of paedomorphy, and convergent adaptive characters makes phylogenetic reconstruction only based on morphological characters very difficult and speculative. © 2009 The Linnean Society of London, Zoological Journal of the Linnean Society, 2009, 155 , 22–39.     

Effect of temperature on the saccharide composition obtained after alpha-amylolysis of starch

The hydrolysis of starch to low-molecular-weight products (normally characterised by their dextrose equivalent (DE), which is directly related to the number-average molecular mass) was studied at different temperatures. Amylopectin potato starch, lacking amylose, was selected because of its low tendency towards retrogradation at lower temperatures. Bacillus licheniformis alpha-amylase was added to 10% [w/w] gelatinised starch solutions. The hydrolysis experiments were done at 50, 70, and 90 degrees C. Samples were taken at defined DE values and these were analysed with respect to their saccharide composition. At the same DE the oligosaccharide composition depended on the hydrolysis temperature. This implies that at the same net number of bonds hydrolysed by the enzyme, the saccharide composition was different. The hydrolysis temperature also influenced the initial overall molecular-weight distribution. Higher temperatures led to a more homogenous molecular weight distribution. Similar effects were observed for alpha-amylases from other microbial sources such as Bacillus amyloliquefaciens and Bacillus stearothermophilus. Varying the pH (5.1, 6.2, and 7.6) at 70 degrees C did not significantly influence the saccharide composition obtained during B. licheniformis alpha-amylase hydrolysis. The underlying mechanisms for B. licheniformis alpha-amylase were studied using pure linear oligosaccharides, ranging from maltotriose to maltoheptaose as substrates. Activation energies for the hydrolysis of individual oligosaccharides were calculated from Arrhenius plots at 60, 70, 80, and 90 degrees C. Oligosaccharides with a degree of polymerisation exceeding that of the substrate could be detected. The contribution of these oligosaccharides increased as the degree of polymerisation of the substrate decreased and the temperature of hydrolysis increased. The product specificity decreased with increasing temperature of hydrolysis, which led to a more equal distribution between the possible products formed. Calculations with the subsite map as determined for the closely related alpha-amylase from B. amyloliquefaciens reconfirmed this finding of a decreased substrate specificity with increased temperature of hydrolysis. Copyright 1999 John Wiley & Sons, Inc.     

Synthesis and structure-activity relationships of 16-modified analogs of 2-methoxyestradiol

A series of 16-modified 2-methoxyestradiol analogs were synthesized and evaluated for antiproliferative activity toward HUVEC and MDA-MB-231 cells, and for susceptibility to conjugation. In addition, the estrogenicity of these analogs was accessed by measuring cell proliferation of the estrogen-dependent cell line MCF7 in response to compound treatment. It was observed that antiproliferative activity dropped as the size of the 16 substituent increased. Selected analogs tested in glucuronidation assays had similar rates of clearance to 2-methoxyestradiol, but had enhanced clearance in sulfonate conjugation assays.     

Mental practice-based rehabilitation training to improve arm function and daily activity performance in stroke patients: a randomized clinical trial

Background  

Over 50% of patients with upper limb paresis resulting from stroke face long-term impaired arm function and ensuing disability in daily life. Unfortunately, the number of effective treatments aimed at improving arm function due to stroke is still low. This study aims to evaluate a new therapy for improving arm function in sub-acute stroke patients based on mental practice theories and functional task-oriented training, and to study the predictors for a positive treatment result. It is hypothesized that a six-week, mental practice-based training program (additional to regular therapy) targeting the specific upper extremity skills important to the individual patient will significantly improve both arm function and daily activity performance, as well as being cost effective.     

POCUS: mining genomic sequence annotation to predict disease genes

Here we present POCUS (prioritization of candidate genes using statistics), a novel computational approach to prioritize candidate disease genes that is based on over-representation of functional annotation between loci for the same disease. We show that POCUS can provide high (up to 81-fold) enrichment of real disease genes in the candidate-gene shortlists it produces compared with the original large sets of positional candidates. In contrast to existing methods, POCUS can also suggest counterintuitive candidates.     

<Emphasis Type="Italic">Demodex gatoi</Emphasis> -associated contagious pruritic dermatosis in cats - a report from six households in Finland

Background  

Demodex gatoi is unique among demodectic mites. It possesses a distinct stubby appearance, and, instead of residing in the hair follicles, it dwells in the keratin layer of the epidermis, causing a pruritic and contagious skin disease in cats. Little is known of the occurrence of D. gatoi in Europe or control of D. gatoi infestation.     

Sensitivity of methods for estimating breeding values using genetic markers to the number of QTL and distribution of QTL variance

The objective of this simulation study was to compare the effect of the number of QTL and distribution of QTL variance on the accuracy of breeding values estimated with genomewide markers (MEBV). Three distinct methods were used to calculate MEBV: a Bayesian Method (BM), Least Angle Regression (LARS) and Partial Least Square Regression (PLSR). The accuracy of MEBV calculated with BM and LARS decreased when the number of simulated QTL increased. The accuracy decreased more when QTL had different variance values than when all QTL had an equal variance. The accuracy of MEBV calculated with PLSR was affected neither by the number of QTL nor by the distribution of QTL variance. Additional simulations and analyses showed that these conclusions were not affected by the number of individuals in the training population, by the number of markers and by the heritability of the trait. Results of this study show that the effect of the number of QTL and distribution of QTL variance on the accuracy of MEBV depends on the method that is used to calculate MEBV.