Characterization of the reversible state of photoinhibition occurring in vitro under anaerobic conditions

Thylakoid membranes were subjected to photoinhibitory illumination. The use of oxygen-consuming enzymes to obtain strictly anaerobic conditions showed that while the absence of oxygen is a prerequisite for the formation of a reversibly photoinhibited state, the presence of oxygen is required for the recovery in the dark. The formation of the reversibly photoinhibited state did not protect the thylakoid membranes against irreversible damage. The effects of both bicarbonate and formate were found to be qualitatively different for photoinhibition under strictly anaerobic conditions compared to the effects observed under normal aerobic photoinhibition. It is suggested that there are two different mechanisms of photoinhibition, occurring to different extent under aerobic and anaerobic conditions, respectively, involving Q_A in both cases, but the Q_B-site in the former only.Abbreviations chl chlorophyll - PpBQ phenyl-p-benzoquinone - PS 2 Photosystem 2 - Q_A and Q_B primary and secondary quinone acceptors of Photosystem 2     

Impacts of rewetting on peat,hydrology and water chemical composition over 15 years in two finished peat extraction areas in Sweden

Restoration of wetlands is a high priority world-wide. Peat extraction areas can be restored by rewetting, however affecting the environment. It could be expected to turn the drained peat-cutover area from a source to a sink of most elements. This study examined effects of such rewetting on peat, hydrology and water chemistry over 15 years at two sites in Sweden; the nutrient-poor Porla peatland and the nutrient-rich Västkärr peatland. Rewetting caused minor changes to peat chemistry, but at the Västkärr site ammonium concentrations increased in superficial peat layers while nitrate decreased. In terms of hydrology, rewetting of the Porla site decreased annual runoff and both high and low discharges. Water pH at the Porla site stayed fairly stable, but at the Västkärr site pH, after an initial 4 years dip, gradually increased to higher values than before rewetting. Water colour and organic matter content were fairly stable, but slightly lower values were found after 15 years than in initial 4–5 years. The concentrations of base cations and of inorganic N were lower after rewetting, while total P was higher. However, these impacts could change from an initial phase as the wetlands in the long-term perspective develop into mires.     

Robust Expression of the Human Neonatal Fc Receptor in a Truncated Soluble Form and as a Full-Length Membrane-Bound Protein in Fusion with eGFP

Studies on the neonatal Fc receptor (FcRn) have revealed a multitude of important functions in mammals, including protection of IgG and serum albumin (SA) from lysosomal degradation. The pharmacokinetic behavior of therapeutic antibodies, IgG-Fc- and SA-containing drugs is therefore influenced by their interaction with FcRn. Pre-clinical development of such drugs is facilitated if their interaction with FcRn can be studied in vitro. For this reason we have developed a robust system for production of the soluble extracellular domain of human FcRn as well as the full-length receptor as fusion to green fluorescent protein, taking advantage of a lentivirus-based gene delivery system where stable over-expressing cells are easily and rapidly generated. Production of the extracellular domain in multiple-layered culture flasks, followed by affinity purification using immobilized IgG, resulted in capture of milligram amounts of soluble receptor per liter cell culture with retained IgG binding. The receptor was further characterized by SDS-PAGE, western blotting, circular dichroism spectroscopy, ELISA, surface plasmon resonance and a temperature stability assay showing a functional and stable protein of high purity. The full-length receptor was found to be successfully over-expressed in a membrane-bound form with retained pH-dependent IgG- and SA-binding.     

A scalable life cycle inventory of an electrical automotive traction machine—Part I: design and composition

Purpose

A scalable life cycle inventory (LCI) model of a permanent magnet electrical machine, containing both design and production data, has been established. The purpose is to contribute with new and easy-to-use data for LCA of electric vehicles by providing a scalable mass estimation and manufacturing inventory for a typical electrical automotive traction machine. The aim of this article (part I of two publications) is to present the machine design, the model structure, and an evaluation of the models’ mass estimations.

Methods

Data for design and production of electrical machines has been compiled from books, scientific papers, benchmarking literature, expert interviews, various specifications, factory records, and a factory site visit. For the design part, one small and one large reference machine were constructed in a software tool, which linked the machines’ maximum ability to deliver torque to the mass of its electromagnetically active parts. Additional data for remaining parts was then gathered separately to make the design complete. The two datasets were combined into one model, which calculates the mass of all motor subparts from an input of maximum power and torque. The range of the model is 20–200 kW and 48–477 Nm. The validity of the model was evaluated through comparison with seven permanent magnet electrical traction machines from established brands.

Results and discussion

The LCI model was successfully implemented to calculate the mass content of 20 different materials in the motor. The models’ mass estimations deviate up to 21% from the examples of real motors, which still falls within expectations for a good result, considering a noticeable variability in design, even for the same machine type and similar requirements. The model results form a rough and reasonable median in comparison to the pattern created by all data points. Also, the reference motors were assessed for performance, showing that the electromagnetic efficiency reaches 96–97%.

Conclusions

The LCI model relies on thorough design data collection and fundamental electromagnetic theory. The selected design has a high efficiency, and the motor is suitable for electric propulsion of vehicles. Furthermore, the LCI model generates representative mass estimations when compared with recently published data for electrical traction machines. Hence, for permanent magnet-type machines, the LCI model may be used as a generic component estimation for LCA of electric vehicles, when specific data is lacking.

     

Identification of plant volatiles activating single receptor neurons in the pine weevil (Hylobius abietis)

Naturally produced plant volatiles, eliciting responses of single olfactory receptor neurons in the pine weevil, have been identified by gas chromatography linked with mass spectrometry. The receptor neurons (n = 72) were classified in 30 types, according to the compound which elicited the strongest response in each neuron, 20 of which compounds were identified. Most potent for 14 types of neurons (n = 50) were monoterpenes, including bicyclic (e.g. α-pinene, camphor and myrtenal) for 8 types (n = 32), monocyclic (limonene, carvone, α-terpinene) for 3 types (n = 12) and acyclic (e.g. β-myrcene and linalool) for 3 types (n = 6). Other compounds eliciting strongest responses of a neuron were five sesquiterpenes, including α-copaene and a farnesene-isomer, and an anethole type which has no biosynthetic relationship with terpenes. Within one type, receptor neurons with quite selective responses to the most potent compound as well as neurons with additional responses to several, structurally similar compounds were found, indicating that the neurons may have the same functional types of membrane receptors, but different sensitivities. Response spectra of neurons within the bicyclic-, mono-cyclic and acyclic types showed more overlapping than across the neuron types. Minimal overlapping response spectra was found between monoterpene and sesquiterpene neurons. The results suggest that this structure-activity relationship is significant for encoding plant odour information in the pipe weevil. Accepted: 6 January 1997     

Marker-assisted selection of restored male-fertile Brassica napus plants using a set of dominant RAPD markers

Bulked segregant analysis was used to identify RAPD markers in oilseed rape (Brassica napus L.) that were linked to a male fertility restorer gene for Ogura cytoplasmic male sterility. After screening for polymorphisms using 960 primers, 14 RAPD markers were mapped to a 25 cM region including the restorer locus, a mapping population of 242 F₂ individuals being employed. The map was used to select 11 markers that were investigated for polymorphisms between the restorer donor line and 46 recipient lines. A set of four RAPD markers, one in coupling phase with the restorer allele and three with the non-restorer allele, which were informative in all 46 combinations, were used in marker assisted selection of plants homozygous for the restorer allele. A total of 906 homozygous restored plants were found among the 4605 BC₁F₂ plants analysed. Phenotypic data of a subset of the classified plants was compared with the RAPD data and the expected number of recombinants was calculated from the map data. A close correspondence between the expected and observed numbers of plants with a deviating phenotype was found. Thus, use of a set of dominant RAPD markers provides a way obtaining reliable data for marker-assisted selection.     

Interaction of bovine coagulation factor X and its glutamic-acid-containing fragments with phospholipid membranes. A surface plasmon resonance study.

The interaction of blood coagulation factor X and its Gla-containing fragments with negatively charged phospholipid membranes composed of 25 mol% phosphatidylserine (PtdSer) and 75 mol% phosphatidylcholine (PtdCho) was studied by surface plasmon resonance. The binding to 100 mol% PtdCho membranes was negligible. The calcium dependence in the membrane binding was evaluated for intact bovine factor X (factor X) and the fragment containing the Gla-domain and the N-terminal EGF (epidermal growth factor)-like domain, Gla-EGFN, from factor X. Both proteins show the same calcium dependence in the membrane binding. Calcium binding is cooperative and half-maximum binding was observed at 1.5 mm and 1.4 mm, with the best fit to the experimental data with three cooperatively bound calcium ions for both the intact protein and the fragment. The dissociation constant (Kd) for binding to membranes containing 25 mol% PtdSer decreased from 4.6 microm for the isolated Gla-domain to 1 microm for the fragments Gla-EGFN and Gla-EGFNC (the Gla-domain and both EGF-like domains) fragments and to 40 nm for the entire protein as zymogen, activated enzyme or in the active-site inhibited form. Analysis of the kinetics of adsorption and desorption confirmed the equilibrium binding data.     

Decarboxylation and transport of auxin in segments of sunflower and cabbage roots

Summary The movement of ¹⁴C from indole-3-acetic acid (IAA) ¹⁴C has been examined in 5 mm root segments of dark-grown seedlings of Helianthus annuus and Brassica oleracea. Contaminants from distilled water, phosphate buffer and the razor-blade cutter increase the decarboxylation of IAA-¹⁴C, and cutting of root segments results in an activation of IAA-destroying enzymes at the cut surfaces. When these sources of errors were eliminated the following was shown: a) Both in sunflower and cabbage there is a slight acropetal flux of ¹⁴C through the root segments into the agar receiver blocks. The amount of ¹⁴C found in the receiver blocks increases with the lenght of the transport period. b) When the root segments, after the transport period, are cut in two equal parts and these assayed separately, the amounts of ¹⁴C in the two parts indicate a greater acropetal than basipetal transport. c) The total radioactivity of the receiver blocks is in part due to IAA-¹⁴C and in part to ¹⁴CO₂, the latter being a result of enzymatic destruction of auxin. d) Addition of ferulic acid, an inhibitor of IAA oxidases, to the receiver blocks markedly inhibits the decarboxylation of IAA-¹⁴C and thus increases the amount transported. This effect is more pronounced after a 20 hr than after a 6 hr transport period.     

Fluorescence histochemical observations on catecholamine-containing cell bodies in Auerbach's plexus

Summary The nature and distribution of cell contacts have been examined in the human enamel organ in bell stage. The lateral cell surfaces of secretory ameloblasts are linked at their distal (apical) and proximal (basal) parts by junctional complexes consisting of tight junctions, large intermediate junctions (zonulae adherentes), occasional gap junctions and one or more series of desmosomes. Scattered desmosomes and large gap junctions link epithelial cells of the external enamel epithelium, stellate reticulum, stratum intermedium and internal enamel epithelium including secretory ameloblasts. Furthermore the above-mentioned layers are also linked together by desmosomes and gap junctions.With increasing maturation of the enamel organ an increase in size and number of gap junctions is observed. Some possible implications of the role of the different junctions are considered. The gap junctions probably participate in cell differentiation in the normal morphogenesis of the teeth as well as in metabolic and ionic coupling of the cells of the enamel organ. By means of tight junctions, adjacent secretory ameloblasts cooperate to form a physical barrier which might prevent the diffusion of some types of molecules or substances (e.g. secretory material distally and acid mucopolysaccharides proximally) through the interspaces between the cells. Adhering junctions might assist in regulation of the mechanical properties of the enamel organ as a whole.This work was supported by grants from Statens almindelige Videnskabsfond, Copenhagen, and the Association for the Aid of the Crippled Children, New York.     

Nukleinsäureketten und Genvermehrung

Ohne Zusammenfassung