Separation of dilute aqueous butanol and acetone solutions by pervaporation through liquid membranes

A simultaneous extraction-stripping process is proposed for separating volatile products from fermentation broths, it is based on pervaporation through a liquid membrane supported with a hydrophobic porous membrane. The liquid membrane prepared with oleyl alcohol was selected as the most suitable for separating volatile products resulting from acetone-butanol fermentation. The separation performance and stability of the oleyl alcohol liquid membrane were investigated by using dilute aqueous butanol and acetone solutions. The oleyl alcohol liquid membrane was found to be superior by far in both selectivity and permeability of butanol to the better known silicone rubber membrane in its high selectivity for alcohols. Using the oleyl alcohol liquid membrane, the dilute aqueous butanol solutions of around 4 g/L obtained in acetone-butanol fermentation could be concentrated up to 100 times. The stability of this liquid membrane was also quite good as long as the surface tension of the feed solution was less than the critical surface tension of the support membrane. No change in the separation performance was found after the continuous usage in a long period of 100 h.     

Simulating Evolution by Gene Duplication

By considering the recent finding that unequal crossing over and other molecular interactions are contributing to the evolution of multigene families, a model of the origin of repetitive genes was studied by Monte Carlo simulations. Starting from a single gene copy, how genetic systems evolve was examined under unequal crossing over, random drift and natural selection. Both beneficial and deteriorating mutations were incorporated, and the latter were assumed to occur ten times more frequently than the former. Positive natural selection favors those chromosomes with more beneficial mutations in redundant copies than others in the population, but accumulation of deteriorating mutations (pseudogenes) have no effect on fitness so long as there remains a functional gene. The results imply the following: Positive natural selection is needed in order to acquire gene families with new functions. Without it, too many pseudogenes accumulate before attaining a functional gene family. There is a large fluctuation in the outcome even if parameters are the same. When unequal crossing over occurs more frequently, the system evolves more rapidly. It was also shown, under realistic values of parameters, that the genetic load for acquiring a new gene is not as large as J.B.S. Haldane suggested, but not so small as in a model in which a system for selection started from already redundant genes.     

Immunohistochemical colocalization of glucagon,serotonin, and aromatic L-amino acid decarboxylase in islet A cells of chicken pancreas

Summary The identity of monoamine-emitted, formaldehyde-induced fluorescence in some pancreatic islet cells was studied in pancreatic tissue of male chickens by fluorescence and immunohistochemistry either on the same tissue section or on serial tissue sections. Pancreatic islet cells emitting intense formaldehyde-induced fluorescence also react immunohistochemically with antisera directed against glucagon, serotonin and aromatic L-amino acid decarboxylase. These results show that chicken pancreatic islet A cells contain glucagon, serotonin, and aromatic L-amino acid decarboxylase, an enzyme involved in the synthesis of serotonin. The islet B cells identified with anti-insulin immunoreactivity, which displayed a very weak formaldehyde-induced fluorescence, did not react with anti-serotonin serum.     

Energy saving effect of pervaporation using oleyl alcohol liquid membrane in butanol purification

The liquid membrane prepared with oleyl alcohol was used in pervaporation of dilute aqueous butanol solutions. The selectivity of this liquid membrane was found to be superior than that of silicone rubber membrane, and the separation factor for butanol was 180. Energy saving effect of pervaporation in butanol purification was investigated by comparing the energies required to purify a butanol solution of 0.5 wt.% in the following three separation systems; a conventional distillation system, a separation system combining pervaporation with distillation, and a pervaporation system using a hydrophobic membrane and a hydrohylic membrane in series. When the pervaporation using oleyl alcohol liquid membrane was employed as a pretreatment process of butanol purification, the energy requirement was found to be around one-tenth of that of conventional distillation.List of Symbols E _D MJ/kg Specific energy requirement of butanol purification by distillation - J kg/(m² · h) Total permeation flux - J _B kg/(m² · h) Permeation flux of butanol - P ₁, P ₂ MPa Pressure at inlet and outlet of vacuum pump - Q kJ/h Energy transfer rate - Q _C Q _W kJ/h Energy consumption rate of condenser and vacuum pump - R J/K · mol Gas constant - t, T °C, K Temperature - W-g/h Mass flow rate of butanol/water binary mixture - (W) _F1 ,-kg/h Mass flow rate of aqueous butanol solution - (W) _F2 at inlet and outlet of permeation cell - W* kJ/mol Energy requirement of adiavatic expansion - X _B Butanol mass fraction of aqueous butanol solution - (X _B ) _F Butanol mass fraction of aqueous butanol solution supplied into distillation column - (X _B ) _F1 Butanol mass fraction of aqueous butanol - (X _B ) _F2 solution at inlet and outlet of permeation cell - Y _B Butanol mass fraction in permeate - Separation factor of butanol - Adiavatic constant     

Distribution and possible intergradation betweenMacaca tonkeana andM. ochreata at the borderland of the species in Sulawesi

Morphological observations of pet and wild monkeys were made in the area that was inferred to be the borderland betweenMacaca tonkeana andM. ochreata in Sulawesi. Almost all individual monkeys could be classified into one of two species by their external characteristics. The possible borderland was estimated to extend from the La River in the east and to around Karaena River in the west. These two species may make contact in the forest in the western area of the borderland. Some external characteristics exhibited wide individual variations in the two species. Some monkeys originating from the borderland showed external characteristics that were intermediate between those of the two species. The possible intergradation between these two species is discussed in terms of the morphological variations found in the two species.     

The effects of phosphorylation and dephosphorylation of brain myosin on its actin-activated Mg2+-ATPase and contractile activities

Purified bovine brain myosin contained approximately 1 and 3 mol of protein-bound phosphate/mol myosin in the light chains and heavy chains, respectively. Large portions of this light chain- and heavy chain-bound phosphate (about 0.8 and 2.4 mol, respectively) were removed by incubation with a brain phosphoprotein phosphatase and potato acid phosphatase, respectively. Upon phosphorylation of the dephosphorylated brain myosin with myosin light chain kinase and casein kinase II, about 1.6 and 3.0 mol of phosphate was incorporated into the light chains and heavy chains, respectively, while much lower levels of phosphate were incorporated into the non-dephosphorylated brain myosin under the same conditions. The actin-activated Mg2+-ATPase activity of brain myosin rephosphorylated with myosin light chain kinase was about twice as high as that of dephosphorylated brain myosin (about 30 and 15 nmol phosphate/mg/min, respectively). On the other hand, whereas the rephosphorylated brain myosin superprecipitated rapidly with F-actin, the rate of superprecipitation of the dephosphorylated brain myosin was extremely low. Under appropriate conditions, a loose network of tiny superprecipitates, which formed initially throughout the solution, contracted to form eventually a large and dense particle. These results indicate that phosphorylation of the light chains of brain myosin is a prerequisite for the contraction of brain actomyosin. The role of phosphorylation of the heavy chains by casein kinase II remains to be elucidated.     

Studies on the physical states of human platelet myosin in crude extracts

The physical properties of human platelet myosin in crude extracts were studied by means of Sepharose 4B gel filtration and sucrose density gradient centrifugation in the presence or absence of Mg-ATP. Platelet myosin extracted with a buffer containing 0-0.15 M KCl gave a Stokes radius of about 12.0-12.5 nm irrespective of the presence or absence of Mg-ATP. The sedimentation coefficients obtained in the presence of Mg-ATP were about 10-11 and 8.5S at 0.05-0.10 and 0.15 M KCl, respectively, whereas the values obtained in the absence of Mg-ATP were about 16, 9-12, and 8.5S at 0.05, 0.10, and 0.15 M KCl, respectively. The apparent molecular weight in the presence of Mg-ATP, therefore, was about 500,000 and 420,000 at 0.05-0.10 and 0.15 M KCl, respectively, while the molecular weight in the absence of Mg-ATP was about 790,000, 460,000-620,000, and 440,000 at 0.05, 0.10, and 0.15 M KCl, respectively. The purified monomeric platelet myosin that had been solubilized with Mg-ATP at 0.10 M KCl had a Stokes radius of about 12.5 nm, a sedimentation coefficient of about 9S, and an apparent molecular weight of 460,000. On the other hand, while crude platelet myosin extracted at 0.6 M KCl with Mg-ATP gave a Stokes radius of about 20 nm, a sedimentation coefficient of about of 6S, and an apparent molecular weight of about 490,000, each of these physical parameters obtained in the absence of Mg-ATP was much larger than that obtained in the presence of Mg-ATP because the myosin was associated with F-actin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Purification and identification of [hydroxyprolyl3]bradykinin in ascitic fluid from a patient with gastric cancer

Kinins in the ascitic fluid from a patient with gastric cancer were purified by gel filtration and reversed-phase high-performance liquid chromatography (HPLC). Two fractions (fractions I and II) showed kinin activity. Fraction I did not correspond to either bradykinin or other known kinins, whereas fraction II corresponded to bradykinin. Fraction I contained 8 amino acid residues from bradykinin minus 1 proline plus 1 additional hydroxyproline. Sequence analysis of fraction I showed that the proline at the third amino acid residue of bradykinin was replaced by hydroxyproline. The retention time of fraction I on reversed-phase HPLC was exactly the same as that of synthetic [hydroxyprolyl3]bradykinin (Arg-Pro-Hyp-Gly-Phe-Ser-Pro-Phe-Arg) and was distinguishable from des-Pro3-bradykinin. Thus, these results demonstrate for the first time the presence of [hydroxyprolyl3]bradykinin in vivo. This is also the first report of the presence of bradykinin in human tumor ascites.     

Population Genetics of an Expanding Family of Mobile Genetic Elements

A model of an expanding family of dispersed repetitive DNA was studied. Based on the previous result of the model of duplicative transposition, an approximate solution to give allelism and identify coefficients as functions of time was obtained, and theoretical predictions were verified by Monte Carlo experiments. The results show that, even if the copy number per genome increases very rapidly, allelism and identity coefficients may take a long time to reach equilibrium. The changes of allelism and allelic identity are similar to that of homozygosity at an ordinary single locus, whereas that of nonallelic identity can be much slower, particularly when the copy number per genome is large. Thus, many existing families of highly repetitive sequences may represent nonequilibrium states for nonallelic identity. The present model may be extended to include other evolutionary forces such as gene conversion or the recurrent insertion from normal gene copies.