Site-directed mutagenesis of the CP 47 protein of photosystem II: 167W in the lumenally exposed loop C is required for photosystem II assembly and stability

The intrinsic chlorophyll-protein CP 47 is a component of photosystem II which functions in both light-harvesting and oxygen evolution. Using site-directed mutagenesis we have produced the mutant W167S which lies in loop C of CP 47. This strain exhibited a 75% loss in oxygen evolution activity and grew extremely slowly in the absence of glucose. Examination of normalized oxygen evolution traces indicated that the mutant was susceptible to photoinactivation. Analysis of the variable fluorescence yield indicated that the mutant accumulated very few functional PS II reaction centers. This was confirmed by immunoblotting experiments. Interestingly, when W167S was grown in the presence of 20 M DCMU, the mutant continued to exhibit these defects. These results indicate that tryptophan 167 in loop C of CP 47 is important for the assembly and stability of the PS II reaction center.     

Growth maintenance of the maize primary root at low water potentials involves increases in cell-wall extension properties, expansin activity, and wall susceptibility to expansins

Previous work on the growth biophysics of maize (Zea mays L.) primary roots suggested that cell walls in the apical 5 mm of the elongation zone increased their yielding ability as an adaptive response to low turgor and water potential (psi w). To test this hypothesis more directly, we measured the acid-induced extension of isolated walls from roots grown at high (-0.03 MPa) or low (-1.6 MPa) psi w using an extensometer. Acid-induced extension was greatly increased in the apical 5 mm and was largely eliminated in the 5- to 10-mm region of roots grown at low psi w. This pattern is consistent with the maintenance of elongation toward the apex and the shortening of the elongation zone in these roots. Wall proteins extracted from the elongation zone possessed expansin activity, which increased substantially in roots grown at low psi w. Western blots likewise indicated higher expansin abundance in the roots at low psi w. Additionally, the susceptibility of walls to expansin action was higher in the apical 5 mm of roots at low psi w than in roots at high psi w. The basal region of the elongation zone (5-10 mm) did not extend in response to expansins, indicating that loss of susceptibility to expansins was associated with growth cessation in this region. Our results indicate that both the increase in expansin activity and the increase in cell-wall susceptibility to expansins play a role in enhancing cell-wall yielding and, therefore, in maintaining elongation in the apical region of maize primary roots at low psi w.     

Estimation of the primary productivity of Spartina alterniflora using a canopy model

A comprehensive canopy productivity model was built to study the productivity of a primary salt marsh grass, Spartina alterniflora. in Georgia, USA The canopy model was unique in employing plant demographic data to reconstruct canopy profiles and dynamics, which showed many growth processes that are otherwise difficult to discern in the field By linking canopy dynamics and leaf photosynthesis, the net total primary productivity of S alterniflora m a Georgia salt marsh was estimated to be 1421, 749, and 1441 g C m^-2 yr^-1 for the tall, short, and N-fertilized short populations respectively These estimates are reasonable in terms of the physiological capacity of S alterniflora and well below the range of 3000–4200 g C m^-2 yr^-1 as reported by some recent harvest studies Our detailed analysis suggested the net total productivity of S alterniflora might be greatly overestimated in the past This is mainly because of 1) failure to consider the translocation of photosynthate between aboveground and belowground parts, and 2) possible overestimates of belowground production We estimated the net belowground production to be 872, 397, and 762 g C m^-2 yr^-1 for the tall, short, and N-fertilized populations respectively After receiving nitrogen fertilizer, the net leaf carbon fixation in the short population increased from 1489 to 2487 g C m^-2 yr^-1, and our simulation showed the contribution of elevated leaf N to this increase was small, 21%, compared with that of increased leaf area, 79% Both tall and short populations allocated ca 48-49% of their annual gross leaf carbon fixation to belowground structures Nitrogen enrichment caused more allocation to aboveground parts in the short population, mainly for increasing leaf area The canopy model assumed that there was no leaf photosynthesis under tidal submergence, but if this assumption was relaxed, then leaf carbon fixation might increase 7–13% for different S alterniflora populations Although this research focused only on a salt marsh species, our general approaches, especially the coupling of leaf physiology with the reconstructed canopies, should be applicable to the study of production processes of many other plant populations     

粒粒橙饮料的分层与汁胞萎瘪褪色的初步研究

本文研究了热因子对琼脂悬浮稳定性的影响,分析了造成汁胞萎瘪褪色的原因,并提出了解决的办法。认为只要琼脂的加热时间不要太长,分层现象是比较容易解决的。海藻酸钙凝胶薄膜和含油溶剂预处理能很好地防止汁胞的萎瘪破碎,但操作不当容易造成褪色。     

以淀粉珠为载体的亲和层析法分离纯化高温α淀粉酶

 以淀粉珠为载体的亲和层析法分离纯化高温α淀粉酶张学忠,宋伦,王群,吴晓霞,唐锌进（吉林大学酶工程国家重点实验室,长春１３００２３;南京师范大学生物系,南京２１００２４）金凤燮等人从酒曲中筛选出高产热稳定α淀粉酶的菌株,命名为Ｂａｃｉｌｌｕｓｓｐ－ＪＦ...     

人粒细胞集落刺激因子（hG－CSF）cDNA3′－UTR对其表达的影响

利用人粒细胞集落刺激因子（ｈＧ－ＣＳＦ）ｃＤＮＡ３′端非翻译区（３′－ＵＴＲ）中存在的ＤｒａⅠ酶切位点,通过部分酶切与完全酶切,删除３′－ＵＴＲ不同长度,构建了四种ｈＧ－ＣＳＦｃＤＮＡ瞬时重组表达质粒。转染ＣＯＳ－７细胞后,生物活性测定结果提示,ｈＧ－ＣＳＦｃＤＮＡ３′－ＵＴＲ对其表达起负调控作用,其关键性序列位于紧接终止密码子ＴＧＡ下游的６５ｂｐ范围内,３′－ＵＴＲ对ｈＧ－ＣＳＦｃＤＮＡ表达的影响与转录水平的差别有一定关系。     

玉米根细胞中对钒酸盐敏感的H~＋－泵的研究

用奎吖咽（ｑｕｉｎａｃｒｉｎｅ）作荧光指标剂,测定玉米（ＺｅａｍａｙｓＬ．）根尖微粒体（ＭＩＣ）膜囊泡的Ｈ~＋－泵活性,结果表明１ｍｍｏｌ／ＬＮａＮ_３仅抑制该泵活性约８％,而０．８ｍｍｏｌ／Ｌ钒酸盐（Ｖａｎ）则可抑制其活性达８０％,说明ＭＩＣ制剂中Ｈ~＋－泵活性主要由质膜（ＰＭ）Ｈ~＋－ＡＴＰａｓｅ产生。此泵活性严格需要Ｍｇ~（２＋）,二价阳离子作用大小的顺序为Ｍｇ~（２＋）＞Ｍｎ~（２＋）＞Ｚｎ~（２＋）＞Ｃａ~（２＋）＝０;阴离子作用大小的１顺序为Ｂｒ~－＞Ｃｌ~－＞ＮＯ_３~－＞ＳＯ_４~（２－）,并初步证实当质膜同侧发生电子传递时,没有跨膜Ｈ~＋梯度（△μＨ~＋）生成。     

Effect of shock-loading of heavy metals on total organic carbon and phosphate removal in an anaerobic-aerobic activated sludge process

The effect of shock-loading of zinc, copper and cadmium ions on the removal of total organic carbon (TOC) and phosphate in an anaerobic-aerobic activated sludge process was investigated. TOC removal was not sensitive to shock-loading of Zn²⁺ and Cd²⁺ ions, and complete removal was achieved even at 20 mg Zn²⁺/l and 20 mg Cd²⁺/l. However, with over 1 mg Cu²⁺/1 TOC removal efficiency decreased. PO _inf4 ^sup3- removal, in contrast, was extremely sensitive to these metal ions, with the threshold being 1 mg Zn²⁺/l and 1 mg Cd²⁺/l. Higher concentrations adversely affected PO _inf4 ^sup3- removal. Copper again proved detrimental; no PO _inf4 ^sup3- removal was achieved even at 1 mg Cu/l. These results highlight the sensitivity of the removal efficiencies of TOC and PO _inf4 ^sup3- to shock loadings of these heavy metals.Y.P. Ting is with the Department of Chemical Engineering, National University of Singapore, Kent Ridge, 0511, Singapore; H. Imai and S. Kinoshita are with the Department of Chemical Process Engineering, Hokkaido University, Sapporo 060, Japan.     

Optimal door fitting with systematic fixture adjustment

A systematic approach is presented to obtain the best door gap quality through optimal door fitting in automobile body manufacturing. First, three indexes of gap quality are defined; they are: (1) door gap width deviation relative to design nominal; (2) door gap parallelism; and (3) car-to-car gap consistency. Then the door-fitting problem is formulated into a general constrained optimization problem. The effects of optimal door fitting on the three quality indexes are evaluated through computer simulation. These results provide a lower bound on the design of nominal door gap by considering process capability. Finally, a computer-aided fixture adjustment scheme is developed to orient a door in a body side opening to achieve the optimal fitting. The amount of adjustment, with the desired orientation obtained from optimization, is calculated based on parametrically modeled local surface features of the fixture and the door. The adequacy of door feature modeling is verified through a door-fitting experiment.