How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Selection and proliferation of rapid growing cell lines from embryo derived cell cultures of yew tree (Taxus cuspidata Sieb. et Zucc)

Calli were induced from 300,000 embryos isolated from immature to mature stage of seeds collected on late September from 14 elite trees. When the embryos were cultured onto plastic Petri-dish containing 20 mL of modified B5 basal medium supplemented with 3% (w/v) sucrose, 500 mg/L casein hydrolysate, 250 mg/L myo-inositol, 0.5% (w/v) polyvinyl polypyrrolidon (PVPP), 2×MS vitamins, 0.5 mg/L gibberellic acid, and 10 mg/L 2,4-D after 2 weeks of culture, yellowish-white calli were immediately formed on the surfaces of embryos, and subcultured for 4 weeks in same culture medium. Because most of calli maintained for more than 3 months were revealed differences in their colors, surface texture, and growth rate, visual selection was made for first round screening. When the size of visually selected calli larger than 19 mm in their diameter were inoculated, persistent proliferation was observed. Among the plating methods tested for the selection of rapid growing cell lines at single cell and/or small cell aggregate level, 2-layer spread plating revealed as the best for single cell cloning. To enhance cell growth and maintain high rate of viability for long-term culture of yew cells in bioreactor, final cell volume less than 50% in SCV seemed to be the best. Time course study revealed that 30% of inoculum density was suitable for fed batch culture. Among the tested conditional media, the rate of 1∶2 (old medium: fresh medium) was recorded at the best for cell growth.     

How costly is clutch formation in the Audouin's Gull Larus audouinii?

During the Audouin's Gull's breeding season at the Ebro Delta in 1993, 24 fresh eggs from eight three-egg clutches (modal clutch-size) were collected at the peak of the laying period. Eggs were processed to obtain formalin-fixed yolks, which were halved and stained using the potassium dichromate method. Digitized images of the yolks were examined to assess the daily rates of yolk deposition. We used these data in combination with egg compositional analysis to build a model of energy demands during the formation of an average clutch in Audouin's Gull. To show how the different parameters of clutch formation affect the daily energy investment peak, we performed a simulation analysis in which the rapid yolk development (RYD) period, the follicle triggering interval (FTI), the laying interval (LI) and the albumen synthesis period (ASP) were allowed to vary simultaneously. In our sample, the mean RYD period was seven days with a range from six to eight days. There were no significant differences in yolk volume among eggs in a clutch, but albumen volume was significantly smaller in third eggs. According to our model the albumen synthesis of the a-egg coincides with the energy demand peak for clutch formation. This peak represents an increase by ca. 42% in female energy requirements. Values obtained from the simulation analysis showed that only the ASP of the a-egg and the RYD durations of the second and third follicles produced noticeable reductions in peak energy investment. We predict that in gulls, whose laying intervals seem to be kept constant, significant increases of the durations of the RYD periods of second and third eggs, or even significant reductions of yolk size of these eggs, may operate simultaneously to match the energy demands during clutch formation to the prevailing food conditions.     

Insulin-induced expression of human heat-shock protein gene hsp70

In human hepatoma cell line Hep3B/T2, the human heat-shock-inducible gene hsp70 could be induced by insulin. The dose-dependent insulin effect correlates very well with the dissociation constant of the insulin receptor, indicating that the insulin effect is mediated by the insulin receptor. The expression of hsp70 gene was neither significantly induced by growth factors of epidermal and platelet-derived growth factors, nor by tumor promoter, calcium ionophore, cAMP, and glucocorticoids. These results indicate that the induction of expression of hsp70 gene by insulin is very specific and not cell cycle-related. Furthermore, the insulin-induced expression of hsp70 gene is transient, occurring specifically from 4 to 8 h after insulin addition.     

Evaluation of the quality of bedside monitoring of the blood glucose level in a teaching hospital.

We evaluated the precision and accuracy of monitoring of the blood glucose level in the laboratory and at the bedside with one of four glucose meters by an experienced operator and by 39 nurses in a teaching hospital. For precision studies aqueous quality control materials were used. A total of 85 blood samples were tested. The precision of the glucose meters (expressed as the coefficient of variation [CV]) in the hands of the experienced operator ranged from 6.7% to 11.1%. The correlation between the values obtained by the experienced operator and the reference values obtained in the laboratory was high (0.95 to 0.98). The precision of the values obtained by the nurses using the meters ranged from 13.7% on medical wards to 45.7% in the intensive care unit (ICU). The correlation between these values and those obtained in the central laboratory ranged from 0.72 to 0.82. Twenty-four percent of the glucose values determined on medical wards and 62% of those determined in the ICU deviated from the reference value by at least 20%. Of the 85 patients 12 (14%) would have received different insulin dosages had the reference value been available at the same time as the glucose meter reading: in 3 of the patients the discrepancy was 6 units of insulin or greater. Continuous quality control of bedside monitoring of the blood glucose level is needed. In addition, personnel who use glucose meters should receive adequate training.     

Reaction mechanism of surfactant‐sensitized chemiluminescence of bis(2,4,6‐trichlorophyenyl) oxalate and hydrogen peroxide induced by gold nanoparticles

The chemiluminescence (CL) of bis(2,4,6‐trichlorophyenyl) oxalate with hydrogen peroxide in the present of cationic surfactant and gold nanoparticles was studied. The CL emission was obviously enhanced in the presence of surfactant at a suitable concentration, with a synergetic catalysis effect exhibited. Different sizes of gold nanoparticles (15 and 50 nm) showed different effects on CL intensity. Mechanisms of the CL reaction and sensitization effect are discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Pre‐copulation intervals,copulation frequencies,and initial progeny sex ratios in two biotypes of whitefly,Bemisia tabaci

The whitefly Bemisia tabaci (Gennadius) (Homoptera: Aleyrodidae) is a species complex, and its systematic classification requires controlled crossing experiments among its genetic groups. Accurate information on pre‐copulation intervals, copulation frequencies, and initial frequency of egg fertilization of newly emerged adults is critical for designing procedures for collecting the virgin adults necessary for these experiments. In the literature, considerable variation is reported between B. tabaci populations, with respect to the length of the pre‐copulation interval and the initial frequency of egg fertilization. Here, we used a video‐recording method to observe continuously the copulation behaviour of the Mediterranean/Asia Minor/Africa (B biotype) and the Asia II (ZHJ1 biotype) groups of B. tabaci. We also recorded the initial frequency of egg fertilization, as determined by the sex of the progeny. When adults were caged in female–male pairs on leaves of cotton plants, the earliest copulation events occurred 2–6 h after emergence; at 12 h after emergence 56–84% of the females had copulated at least once, and nearly all (92–100%) had copulated at least once by 36 h after emergence. Both females and males copulated repeatedly. Approximately 80 and 20% of copulation events occurred during the photophase and scotophase, respectively. By 72 h post‐emergence, the females of the B and ZHJ1 biotypes had copulated on average 6.1 and 3.9 times, respectively. When adults were caged in groups on plants 1–13 h after emergence, 30–35% of the eggs deposited during this period were fertilized, and approximately 90% of females were fertilized by the end of the 13 h. Although timing of copulation differed in detail between the two genetic groups, the results demonstrate that B. tabaci adults can start to copulate as early as 2–6 h post‐emergence and the majority of females can become fertilized on the day that they emerge.     

Carrier detection and prenatal diagnosis of alpha-thalassemia of Southeast Asian deletion by polymerase chain reaction

Summary Alpha-thalassemia of Southeast Asian deletion (-- SEA/) is very common in Southeast Asia. Homozygosity of this genotype is the major cause of Hb Bart's hydrops fetalis in Taiwan. With polymerase chain reaction using three oligonucleotide primers bridging the common deletion breakpoint, a DNA fragment of 194 basepairs (bp) was amplified in chromosomes with the-- SEA determinant and a DNA fragment of 287 bp was amplified in chromosomes without this deletion. In our pilot study including 8 normal subjects, 20 obligate carriers, and 11 homozygotes of the deletion, all the genotypes were determined and then confirmed by Southern blotting and DNA hybridization with globin gene probe. For prenatal diagnosis, 55 at-risk pregnancies were collected. Chorionic villus sampling was done in 51 cases and early amniocentesis was done in 4 cases. Fourteen cases (25.5%) were diagnosed as normal, 25 (45.5%) as heterozygotes, and 16 (29%) as homozygotes of -- SEA. All of the diagnoses were also confirmed as aforementioned. With polymerase chain reaction, the determination of the -- SEA deletion is straightforward and is much quicker and easier than with conventional Southern blotting and DNA hybridization. In areas with a high prevalence of -- SEA deletion, this method provides a rapid tool for carrier detection and prenatal diagnosis.