INTRACORPOREAL HEAT DISSIPATION FROM A RADIOISOTOPE-POWERED ARTIFICIAL HEART

The feasibility of radioisotope-fueled circulatory support systems depends on the ability of the body to dissipate the reject heat from the power source driving the blood pump as well as to tolerate chronic intracorporeal radiation. Our studies have focused on the use of the circulating blood as a heat sink. Initial in vivo heat transfer studies utilized straight tube heat exchangers (electrically and radioisotope energized) to replace a segment of the descending aorta. More recent studies have used a left ventricular assist pump as a blood-cooled heat exchanger. This approach minimizes trauma, does not increase the area of prosthetic interface with the blood, and minimizes system volume. Heat rejected from the thermal engine (vapor or gas cycle) is transported from the nuclear power source in the abdomen to the pump in the thoracic cavity via hydraulic lines. Adjacent tissue is protected from the fuel capsule temperature (900 to 1200 degrees F) by vacuum foil insulation and polyurethane foam. The in vivo thermal management problems have been studied using a simulated thermal system (STS) which approximates the heat rejection and thermal transport mechanisms of the nuclear circulatory support systems under development by NHLI. Electric heaters simulate the reject heat from the thermal engines. These studies have been essential in establishing the location, suspension, surgical procedures, and postoperative care for implanting prototype nuclear heart assist systems in calves. The pump has a thermal impedance of 0.12 degrees C/watt. Analysis of the STS data in terms of an electrical analog model implies a heat transfer coefficient of 4.7 x 10(-3) watt/cm(2) degrees C in the abdomen compared to a value of 14.9 x 10(-3) watt/cm(2) degrees C from the heat exchanger plenum into the diaphragm.     

The development of non-separation time-resolved fluoroimmunoassays for the measurement of urinary metabolites

We describe the principles of a new generation of sequential or simultaneous time-resolved fluoroimmunoassays, namely, simple, rapid, liquid-phase non-separation procedures which may be applied to the measurement of urinary steroid and drug metabolites. As an example, a method for the measurement of estrone-3-glucuronide in undiluted urine is reported. This method has a similar sensitivity, specificity and accuracy to a conventional separation fluoroimmunoassay or radioimmunoassay but in terms of speed, convenience, precision, reliability and clinical utility the new method has many advantages. The labelled antigen is a novel fluorescent europium chelate covalently linked to estrone-3-glucuronide. The antibody-binding reaction involves the incubation of the labelled antigen (2ng) with a limited concentration of polyclonal or monoclonal antibodies to estrone-3-glucuronyl-6-BSA and an aliquot of standard or sample (undiluted urine; 10 μl) in microtitre wells. After a 10 min incubation, the fluorescence which emanates from the antibody-free label is measured in a time-resolved fluorometer and is proportional to the concentration of estrone-3-glucuronide in the standard or sample. The method may be applied for the monitoring of ovarian function in women.     

Coexistence in a guild of filter feeding caddis larvae: do different instars act as different species?

Summary Guild structure and coexistence of filter feeding caddis larvae was studied in three lake-outlet streams in northern Finland. Natural stones were used as sampling units, and for each stone measurements of six microhabitat variables were taken. Species and species instar relationships in the multivariate microhabitat space were analyzed by a method based on Principal Components Analysis. Seven species of filtering caddis larvae were found at the study sites, but detailed analysis was restricted to the four most abundant ones (Polycentropus flavomaculatus, Hydropsyche angustipennis, H. pellucidula, H. saxonica). P. flavomaculatus was the microhabitat generalist of the guild, whereas all the hydropsychids were narrowly specialized in at least one larval instar. In all species, different instars utilized the microhabitat somewhat differentially. Moss content and Froude number were significantly different between instar microhabitats in all comparisons. Ontogenetic niche changes not only separated species instars from each other, but also profoundly changed the biotic as well as abiotic environment of the species at different phases of larval development. This may have important effects on the dynamics of interacting species and, consequently, on the guild structure. While some of the more classical models of coexistence may also be relevant for understanding coexistence in this guild of sessile stream insects, ontogenetic niche changes clearly need to be taken into consideration in future studies of guild structure and species interactions of filter feeding caddisfly larvae.     

Excitatory amino acids inhibit stimulated phosphoinositide hydrolysis in the rat prefrontal cortex

In rat prefrontal cortical slices, the excitatory amino acids N-methyl-D-aspartate (NMDA), ibotenate, L-aspartate, quisqualate, kainate and L-glutamate inhibit carbachol-induced phosphoinositide hydrolysis as measured by the accumulation of [3H]inositol-1-phosphate ([3H]IP1). NMDA dose-dependently inhibited the carbachol response (IC50 = 14.4 microM), and this inhibition was blocked by the NMDA receptor antagonist D,L-aminophosphonovaleric acid. Lowering medium Na+ concentration to 10 mM or exposing slices to pertussis toxin alleviated the inhibitory effect of NMDA on carbachol-induced [3H]IP1 formation. Serotonin-induced stimulation of [3H]IP1 was also inhibited by NMDA; in contrast, stimulation by norepinephrine, epinephrine or dopamine was unaffected. The results suggest that excitatory amino acids, besides their traditional role as stimulatory substances, can also act to inhibit the production of 2nd messengers activated by certain neurotransmitters in the brain.     

Behavioral effects of benzodiazepine antagonists in chlordiazepoxide tolerant and non-tolerant rats

Rats were trained to respond under 3-min fixed-interval schedules of food presentation, and effects of the benzodiazepine-receptor ligands, flumazenil, 2-(4-methoxy-phenyl)-pyrazolo[4,3-c]quinolin-3(5H)-one (CGS 9895), 3-carbo-t-butoxy-beta-carboline (beta-CCtB), and beta-carboline-3-carboxylic acid ethyl ester (beta-CCE) were assessed before and after the induction of tolerance to chlordiazepoxide. Before daily administration of chlordiazepoxide, none of the antagonists produced appreciable effects on rates of responding up to doses of 32.0 mg/kg i.p. beta-CCE was the only antagonist studied at a higher dose (100.0 mg/kg i.p.), which decreased response rates. After 23 days of daily chlordiazepoxide administration (oral doses started at 10 and increased to 100 mg/kg/day by the 17th day), dose-effect curves for chlordiazepoxide were shifted to the right by about one-half log unit. Subjects were also more sensitive to the flumazenil, CGS 9895, and beta-CCtB, however, since these drugs produced only small effects in non-tolerant subjects, precise estimates of the degree of the shift in dose-effect curves could not be estimated. However, there were differences in the changes in the dose-effect curves induced by chlordiazepoxide tolerance. These results suggest differences in mechanism of action of antagonists in tolerant and non-tolerant subjects, and further that the sensitivity that is induced to antagonists in tolerant subjects is not conferred equally to all drugs having benzodiazepine antagonist activity.     

Dissimilation curves as a simple method for the characterization of growth of plant cell suspension cultures

A simple non-invasive method for the characterization of growth of a plant cell suspension in a single culture flask is given. The dissimilation of sugars by a cell-culture causes a loss of weight of the contents of the culture flask, and can therefore be used to follow the growth in that single culture flask. Because a correction for water evaporation is necessary, accurate results can only be obtained when a stable closure is used (e.g. Silicosen T-type plugs). The dissimilation curves obtained in this way were correlated to the concentration of sugars in the medium, the dry weight and the fresh weight. From these correlations the amount of intracellularly stored carbohydrates could be estimated. Rate constants for CO₂-diffusion were determined for different types of closure. These values allowed the estimation of CO₂ levels inside the culture flasks from the dissimilation curves (CO₂ release curves). The dissimilation curves obtained using this method can easily be related to other types of growth curves. Different growth-phases can be clearly distinguished, e.g. lag-phase, exponential growth-phase and stationary-phase.