Validated numerical fluid simulation of a thin‐layer cascade photobioreactor in OpenFOAM

Recently, microalgae have been considered as a promising alternative for the production of biofuels from CO₂. For the efficient cultivation of these microalgae, several types of photobioreactors have been designed and Pilot scale photobioreactors have been used to assess the performance of these reactors. Therein the primarily investigated reactor type is the Raceway Pond. However, the less researched Thin‐Layer Cascade Photobioreactor (TLC) shows a high potential for efficient production processes. Unfortunately, for low‐value products like biofuels costs must be kept to a minimum for an economic operation. To facilitate this, 3D Computational Fluid Dynamic simulations can be employed to estimate performance of reactor variants e.g. with respect to power input and mixing. Since up to now little effort has been put into the modelling of TLC reactors, this report aims to present a simulation approach for these reactors types that allows simple adaptation to different geometric or operational boundary conditions. All models have been generated for a two‐phase mixture in OpenFOAM. To demonstrate its applicability, validation measurements with a physical unit have been performed and were compared to the simulation results. With errors in the order of 10 % a successful simulation of the reactor geometry could be proven.     

Breeding habitat and nest‐site selection by an obligatory “nest‐cleptoparasite”, the Amur Falcon Falco amurensis

The selection of a nest site is crucial for successful reproduction of birds. Animals which re‐use or occupy nest sites constructed by other species often have limited choice. Little is known about the criteria of nest‐stealing species to choose suitable nesting sites and habitats. Here, we analyze breeding‐site selection of an obligatory “nest‐cleptoparasite”, the Amur Falcon Falco amurensis. We collected data on nest sites at Muraviovka Park in the Russian Far East, where the species breeds exclusively in nests of the Eurasian Magpie Pica pica. We sampled 117 Eurasian Magpie nests, 38 of which were occupied by Amur Falcons. Nest‐specific variables were assessed, and a recently developed habitat classification map was used to derive landscape metrics. We found that Amur Falcons chose a wide range of nesting sites, but significantly preferred nests with a domed roof. Breeding pairs of Eurasian Hobby Falco subbuteo and Eurasian Magpie were often found to breed near the nest in about the same distance as neighboring Amur Falcon pairs. Additionally, the occurrence of the species was positively associated with bare soil cover, forest cover, and shrub patches within their home range and negatively with the distance to wetlands. Areas of wetlands and fallow land might be used for foraging since Amur Falcons mostly depend on an insect diet. Additionally, we found that rarely burned habitats were preferred. Overall, the effect of landscape variables on the choice of actual nest sites appeared to be rather small. We used different classification methods to predict the probability of occurrence, of which the Random forest method showed the highest accuracy. The areas determined as suitable habitat showed a high concordance with the actual nest locations. We conclude that Amur Falcons prefer to occupy newly built (domed) nests to ensure high nest quality, as well as nests surrounded by available feeding habitats.     

X-ray sterilization of biopharmaceutical manufacturing equipment—Extractables profile of a film material and copolyester Tritan™ compared to gamma irradiation

The biopharmaceutical industry gains enormous flexibility in production processes by using sterilized preassembled single-use devices. Gamma irradiation is an established sterilization technology that may be restricted in the future by the availability of ⁶⁰Co as irradiation source and irradiation capacities. X-ray technology is considered an alternative type of radiation for sterilizing SU equipment. In the context of extractables and leachables—one concern connected with the use of single-use process equipment—the effect of X-ray irradiation on the extractables profile of the materials needs to be compared to established gamma irradiation to qualify this alternative technology. An approach is presented to obtain robust and comprehensive extractables data for materials used in SU devices after sterilization either using X-ray or gamma irradiation. A careful selection of the test items and the test design allows a one-to-one comparison of data obtained from a combination of orthogonal analytical techniques. The extractables of a modern SU film material and the copolyester Tritan™ are evaluated. The data presented allow a risk evaluation on the safety of this new sterilization modality for biopharmaceutical applications. It is demonstrated that the extractables profile of a polymer is not affected by the type of irradiation used for sterilization.     

Fatty acids differentiate consumers despite variation within prey fatty acid profiles

相似文献   

The cis-Regulatory Atlas of the Mouse Immune System

1. Download high-res image (252KB)
2. Download full-size image

     

Anatomical changes with needle length are correlated with leaf structural and physiological traits across five Pinus species

The genus Pinus has wide geographical range and includes species that are the most economically valued among forest trees worldwide. Pine needle length varies greatly among species, but the effects of needle length on anatomy, function, and coordination and trade‐offs among traits are poorly understood. We examined variation in leaf morphological, anatomical, mechanical, chemical, and physiological characteristics among five southern pine species: Pinus echinata, Pinus elliottii, Pinus palustris, Pinus taeda, and Pinus virginiana. We found that increasing needle length contributed to a trade‐off between the relative fractions of support versus photosynthetic tissue (mesophyll) across species. From the shortest (7 cm) to the longest (36 cm) needles, mechanical tissue fraction increased by 50%, whereas needle dry density decreased by 21%, revealing multiple adjustments to a greater need for mechanical support in longer needles. We also found a fourfold increase in leaf hydraulic conductance over the range of needle length across species, associated with weaker upward trends in stomatal conductance and photosynthetic capacity. Our results suggest that the leaf size strongly influences their anatomical traits, which, in turn, are reflected in leaf mechanical support and physiological capacity.     

Prey Selection by the Water Bug Aphelocheirus aestivalis Fabr. (Heteroptera: Aphelocheiridae)

Feeding experiments were conducted in situ in flow through boxes to determine the vulnerability of different prey types (the mayfly larvae Baetis, Ephemerella and Ecdyonurus spp., the caddisfly larva Hydropsyche spp. and the crustacean Gammarus spp.) to the predaceous water bug Aphelocheirus aestivalis and to estimate the predation impact of Aphelocheirus on prey populations. Experiments with equal densities of mixed prey and experiments where each prey was tested individually revealed that Baetis and Ephemerella were most vulnerable to Aphelocheirus predation: Hydropsyche, Ecdyonurus and Gammarus were little/not preyed upon. The present results suggest that vulnerability of prey depends mainly upon prey mobility and microhabitat overlap between predator and prey and that feeding behaviour of Aphelocheirus resembles more that of megalopterans than of stoneflies. Experiments with different prey densities (120–720 prey m⁻²) showed that the predation rate of Aphelocheirus increased with increasing prey density. Experiments with different substrates documented that mortality rates of prey decreased with increasing substrate complexity. When substrate conditions were complex mortality rates in the control and in the experimental boxes were the same which suggest little importance of Aphelocheirus predation on mayflies in the study site.