Reproductive biology of female blue shark <Emphasis Type="Italic">Prionace glauca</Emphasis> in the southeastern Pacific Ocean

Polyandry is extremely common across a wide range of organisms. In promiscuous mating systems, females are often sexually harassed by males, but at the same time obtain benefits from multiple mating. It remains unclear whether polyandry is exclusively imposed by males or is also promoted by females. Here, we investigated this question by recording the time spent by female guppies near a single male or a group of males with similar size and colour patterns over three consecutive days. We accounted for the effect of shoaling by using a control treatment where a group of females was used instead of a group of males. Results showed that females spent significantly more time near the group of males, but not with the group of females. In the presence of a group of males, total female mating preference time did not change over the course of the study, but rather shifted from spending more time near the single male at the beginning of the experiment to spending more time near the group of males. The consequence of this female preference for associating with a group of males in a non-experimental setup would be to promote multiple mating. Our result indicates that polyandry in guppies is at least partially encouraged by females, and not entirely a consequence of male sexual behaviour.     

A halotolerant and thermotolerant <Emphasis Type="Italic">Bacillus</Emphasis> sp. degrades hydrocarbons and produces tensio-active emulsifying agent

A Bacillus sp. strain DHT, isolated from oil-contaminated soil, grew and produced biosurfactant when cultured in variety of substrate at salinities of up to 100 g l⁻¹ and temperatures up to 45°C. It was capable of utilizing crude oil, fuels, various pure alkanes and PAHs as a sole carbon and energy source across a wide range of temperature and salinity. Over the range evaluated, the degradation of hydrocarbon and biosurfactant production was not influenced by salinity (0–10% wv⁻¹) and temperature (30–45°C). The biosurfactant produced by the organism emulsified a range of hydrocarbons with hexadecane as the best substrate and toluene as the poorest. From 16S rDNA analysis, strain DHT was related to Bacillus licheniformis.     

Algorithms for matching partially labelled sequence graphs

Background

In order to find correlated pairs of positions between proteins, which are useful in predicting interactions, it is necessary to concatenate two large multiple sequence alignments such that the sequences that are joined together belong to those that interact in their species of origin. When each protein is unique then the species name is sufficient to guide this match, however, when there are multiple related sequences (paralogs) in each species then the pairing is more difficult. In bacteria a good guide can be gained from genome co-location as interacting proteins tend to be in a common operon but in eukaryotes this simple principle is not sufficient.

Results

The methods developed in this paper take sets of paralogs for different proteins found in the same species and make a pairing based on their evolutionary distance relative to a set of other proteins that are unique and so have a known relationship (singletons). The former constitute a set of unlabelled nodes in a graph while the latter are labelled. Two variants were tested, one based on a phylogenetic tree of the sequences (the topology-based method) and a simpler, faster variant based only on the inter-sequence distances (the distance-based method). Over a set of test proteins, both gave good results, with the topology method performing slightly better.

Conclusions

The methods develop here still need refinement and augmentation from constraints other than the sequence data alone, such as known interactions from annotation and databases, or non-trivial relationships in genome location. With the ever growing numbers of eukaryotic genomes, it is hoped that the methods described here will open a route to the use of these data equal to the current success attained with bacterial sequences.

     

Patient and observer reported outcome measures to evaluate health-related quality of life in inherited metabolic diseases: a scoping review

Background

Health-related Quality of Life (HrQoL) is a multidimensional measure, which has gained clinical and social relevance. Implementation of a patient-centred approach to both clinical research and care settings, has increased the recognition of patient and/or observer reported outcome measures (PROMs or ObsROMs) as informative and reliable tools for HrQoL assessment. Inherited Metabolic Diseases (IMDs) are a group of heterogeneous conditions with phenotypes ranging from mild to severe and mostly lacking effective therapies. Consequently, HrQoL evaluation is particularly relevant.

Objectives

We aimed to: (1) identify patient and/or caregiver-reported HrQoL instruments used among IMDs; (2) identify the main results of the application of each HrQoL tool and (3) evaluate the main limitations of HrQoL instruments and study design/methodology in IMDs.

Methods

A scoping review was conducted using methods outlined by Arksey and O’Malley. Additionally, we critically analysed each article to identify the HrQoL study drawbacks.

Results

Of the 1954 studies identified, 131 addressed HrQoL of IMDs patients using PROMs and/or ObsROMs, both in observational or interventional studies. In total, we identified 32 HrQoL instruments destined to self- or proxy-completion; only 2% were disease-specific. Multiple tools (both generic and disease-specific) proved to be responsive to changes in HrQoL; the SF-36 and PedsQL questionnaires were the most frequently used in the adult and pediatric populations, respectively. Furthermore, proxy data often demonstrated to be a reliable approach complementing self-reported HrQoL scores. Nevertheless, numerous limitations were identified especially due to the rarity of these conditions.

Conclusions

HrQoL is still not frequently assessed in IMDs. However, our results show successful examples of the use of patient-reported HrQoL instruments in this field. The importance of HrQoL measurement for clinical research and therapy development, incites to further research in HrQoL PROMs’ and ObsROMs’ creation and validation in IMDs.

     

Morpho-physiology and maize grain yield under periodic soil flooding in successive selection cycles

This study was carried out to evaluate maize plants of different recurrent selection cycles of the variety (Zea mays L.—Saracura-BRS-4154) regarded to genetic gains, morphophysiology, and grain yield, achieved over the selection cycles under intermittent flooding of the soil. This variety has the capacity to survive and produce in temporarily flooded soils and was developed by the National Maize and Sorghum Research Center (EMBRAPA). The experiment was conducted in greenhouse by using ten alternating selection cycles (Cycle 1–18) and BR 107 a variety known for its susceptibility to flooding. The flooding initiated at six-leaf stage by applying 50 mm of water three times a week. At flowering, the following parameters were evaluated: rate of leaf photosynthesis, stomatal conductance, intercellular CO₂ concentration, transpiration rate, photosynthetically active leaf area, root porosity, relative chlorophyll content, grain yield, harvest index, ear length, and interval between male and female flowering. Yield as a function of root porosity and photosynthesis were also evaluated. An index was created in this study, in order to help the discussion of the characteristics evaluated, it was called “Relative Tolerance Value—RTV”, only gaseous exchange measurements was not included in this index. By the way, it was observed throughout the selection cycles an increase in all gaseous exchange parameters, being the cycle 18, the one which presented the greatest averages. RTV for leaf area showed the greatest values for cycles 7 and 18, whereas root porosity, chlorophyll relative content, and harvest index, the greater RTV values were found in cycles 17 and 18. The largest grain yield RTV was observed in cycle 7, followed by cycles 13, 15, and 18. Flooding resulted in longer Anthesis-Silking Interval, especially for the first cycles. At flooding condition, grain yield was strongly related to root porosity (R ² = 0.66). These results showed that the selection cycles of “Saracura” maize improved some morphophysiologic characters, which favor their survival in flooded environments, also resulting in higher productivity.     

Silintaphin-1--interaction with silicatein during structure-guiding bio-silica formation

Silicateins are unique enzymes of sponges (phylum Porifera) that template and catalyze the polymerization of nanoscale silicate to siliceous skeletal elements. These multifunctional spicules are often elaborately shaped, with complex symmetries. They carry an axial proteinaceous filament, consisting of silicatein and the scaffold protein silintaphin-1, which guides silica deposition and subsequent spicular morphogenesis. In vivo, the synthesis of the axial filament very likely proceeds in three steps: (a) assembly of silicatein monomers to form one pentamer; (b) assembly of pentamers to form fractal-like structures; and finally (c) assembly of fractal-like structures to form filaments. The present study was aimed at exploring the effect of self-assembled complexes of silicatein and silintaphin-1 on biosilica synthesis in vitro. Hence, in a comparative approach, recombinant silicatein and recombinant silintaphin-1 were used at different stoichiometric ratios to form axial filaments and to synthesize biosilica. Whereas recombinant silicatein-α reaggregates to randomly organized structures, coincubation of silicatein-α and silintaphin-1 (molecular ratio 4 : 1) resulted in synthetic filaments via fractal-like patterned self-assemblies, as observed by electron microscopy. Concurrently, owing to the concerted action of both proteins, the enzymatic activity of silicatein-α strongly increased by 5.3-fold (with the substrate tetraethyl orthosilicate), leading to significantly enhanced synthesis of biosilica. These results indicate that silicatein-α-mediated biosilicification depends on the concomitant presence of silicatein-α and silintaphin-1. Accordingly, silintaphin-1 might not only enhance the enzymatic activity of silicatein-α, but also accelerate the nonenzymatic polycondensation of the silica product before releasing the fully synthesized biosiliceous polymer.     

Increased risk of lung cancer associated with a functionally impaired polymorphic variant of the human DNA glycosylase NEIL2

Human NEIL2, one of five oxidized base-specific DNA glycosylases, is unique in preferentially repairing oxidative damage in transcribed genes. Here we show that depletion of NEIL2 causes a 6-7-fold increase in spontaneous mutation frequency in the HPRT gene of the V79 Chinese hamster lung cell line. This prompted us to screen for NEIL2 variants in lung cancer patients' genomic DNA. We identified several polymorphic variants, among which R103Q and R257L were frequently observed in lung cancer patients. We then characterized these variants biochemically, and observed a modest decrease in DNA glycosylase activity relative to the wild type (WT) only with the R257L mutant protein. However, in reconstituted repair assays containing WT NEIL2 or its R257L and R103Q variants together with other DNA base excision repair (BER) proteins (PNKP, Polβ, Lig IIIα and XRCC1) or using NEIL2-FLAG immunocomplexes, an ~5-fold decrease in repair was observed with the R257L variant compared to WT or R103Q NEIL2, apparently due to the R257L mutant's lower affinity for other repair proteins, particularly Polβ. Notably, increased endogenous DNA damage was observed in NEIL2 variant (R257L)-expressing cells relative to WT cells. Taken together, our results suggest that the decreased DNA repair capacity of the R257L variant can induce mutations that lead to lung cancer development.