Plasticity of the domain structure in FlgJ, a bacterial protein involved in flagellar rod formation

Bacterial flagellar rod structure is built across the peptidoglycan (PG) layer. A Salmonella enterica flagellar protein FlgJ is believed to consist of two functional domains, the N-terminal half acting as a scaffold or cap essential for rod assembly and the C-terminal half acting as a PG hydrolase (PGase) that makes a hole in the PG layer to facilitate rod penetration. In this study, molecular data analyses were conducted on FlgJ data sets sampled from a variety of bacterial species, and three types of FlgJ homologs were identified: (i) "canonical dual-domain" type found in beta- and gamma-proteobacteria that has a domain for one of the PGases, acetylmuramidase (Acm), at the C terminus, (ii) "non-canonical dual-domain" type found in the genus Desulfovibrio (delta-proteobacteria) that bears a domain for another PGase, M23/M37-family peptidase (Pep), at the C terminus and (iii) "single-domain" type found in phylogenetically diverged lineages that lacks the Acm or Pep domain. FlgJ phylogeny, together with the domain architecture, suggested that the single-domain type was the original form of FlgJ and the canonical dual-domain type had evolved from the single-domain type by fusion of the Acm domain to its C terminus in the common ancestor of beta- and gamma-proteobacteria. The non-canonical dual-domain type may have been formed by fusion of the Pep domain to the single-domain type in the ancestor of Desulfovibrio. In some lineages of gamma-proteobacteria, the Acm domain appeared to be lost secondarily from the dual-domain type FlgJ to yield again a single-domain type one. To rationalize the underlying mechanism that gave rise to the two different types of dual-domain FlgJ homologs, we propose a model assuming the lineage-specific co-option of flagellum-specific PGase from diverged housekeeping PGases in bacteria.     

Binding of FAD to cytochrome b558 is facilitated during activation of the phagocyte NADPH oxidase, leading to superoxide production

The superoxide-producing phagocyte NADPH oxidase can be reconstituted in a cell-free system. The activity of NADPH oxidase is dependent on FAD, but the physiological status of FAD in the oxidase is not fully elucidated. To clarify the role of FAD in NADPH oxidase, FAD-free full-length recombinant p47(phox), p67(phox), p40(phox), and Rac were prepared, and the activity was reconstituted with these proteins and purified cytochrome b(558) (cyt b(558)) with different amounts of FAD. A remarkably high activity, over 100 micromol/s/micromol heme, was obtained in the oxidase with purified cyt b(558), ternary complex (p47-p67-p40(phox)), and Rac. From titration with FAD of the activity of NADPH oxidase reconstituted with purified FAD-devoid cyt b, the dissociation constant K(d) of FAD in cyt b(558) of reconstituted oxidase was estimated as nearly 1 nm. We also examined addition of FAD on the assembly process in reconstituted oxidase. The activity was remarkably enhanced when FAD was present during assembly process, and the efficacy of incorporating FAD into the vacant FAD site in purified cyt b(558) increased, compared when FAD was added after assembly processes. The absorption spectra of reconstituted oxidase under anaerobiosis showed that incorporation of FAD into cyt b(558) recovered electron flow from NADPH to heme. From both K(d) values of FAD and the amount of incorporated FAD in cyt b(558) of reconstituted oxidase, in combination with spectra, we propose the model in which the K(d) values of FAD in cyt b(558) is changeable after activation and FAD binding works as a switch to regulate electron transfer in NADPH oxidase.     

Inactivation of Escherichia coli Endotoxin by Soft Hydrothermal Processing

Bacterial endotoxins, also known as lipopolysaccharides, are a fever-producing by-product of gram-negative bacteria commonly known as pyrogens. It is essential to remove endotoxins from parenteral preparations since they have multiple injurious biological activities. Because of their strong heat resistance (e.g., requiring dry-heat sterilization at 250°C for 30 min) and the formation of various supramolecular aggregates, depyrogenation is more difficult than sterilization. We report here that soft hydrothermal processing, which has many advantages in safety and cost efficiency, is sufficient to assure complete depyrogenation by the inactivation of endotoxins. The endotoxin concentration in a sample was measured by using a chromogenic limulus method with an endotoxin-specific limulus reagent. The endotoxin concentration was calculated from a standard curve obtained using a serial dilution of a standard solution. We show that endotoxins were completely inactivated by soft hydrothermal processing at 130°C for 60 min or at 140°C for 30 min in the presence of a high steam saturation ratio or with a flow system. Moreover, it is easy to remove endotoxins from water by soft hydrothermal processing similarly at 130°C for 60 min or at 140°C for 30 min, without any requirement for ultrafiltration, nonselective adsorption with a hydrophobic adsorbent, or an anion exchanger. These findings indicate that soft hydrothermal processing, applied in the presence of a high steam saturation ratio or with a flow system, can inactivate endotoxins and may be useful for the depyrogenation of parenterals, including end products and medical devices that cannot be exposed to the high temperatures of dry heat treatments.Endotoxins are lipopolysaccharides (LPS) that are derived from the cell membranes of gram-negative bacteria and are continuously released into the environment. The release of LPS occurs not only upon cell death but also during growth and division. In the pharmaceutical industry, it is essential to remove endotoxins from parenteral preparations since they have multiple injurious biological activities, including pyrogenicity, lethality, Schwartzman reactivity, adjuvant activity, and macrophage activation (2, 9, 12, 13, 25, 32). Endotoxins are very stable molecules that are capable of resisting extreme temperatures and pH values (3, 16, 17, 29, 30, 34, 38). An endotoxin monomer has a molar mass of 10 to 20 kDa and forms supramolecular aggregates in aqueous solutions (22, 39) due to its amphipathic structure, which makes depyrogenation more difficult than sterilization. Endotoxins are not efficiently inactivated with the regular heat sterilization procedures recommended by the Japanese Pharmacopoeia. These procedures are steam heat treatment at 121°C for 20 min or dry-heat treatment for at least 1 h at 180°C. It is well accepted that only dry-heat treatment is efficient in destroying endotoxins (3, 16, 29, 30) and that endotoxins can be inactivated when exposed to a temperature of 250°C for more than 30 min or 180°C for more than 3 h (14, 36). In the production of parenterals, it is necessary to both depyrogenate the final products and carry out sterilization to avoid bacterial contamination.Several studies have examined dry-heat treatment, which is a very efficient means to degrade endotoxins (6, 20, 21, 26, 41, 42). However, its application is restricted to steel and glass implements that can tolerate high temperatures of >250°C. For sterilization, dry heat treatment tends to be used only with thermostable materials that cannot be sterilized by steam heat treatment (autoclaving). Alternative depyrogenation processes include the application of activated carbon (35), oxidation (15), and acidic or alkaline reagents (27), but steam heat treatment would be an attractive option if it were sufficiently effective. However, the data on the inactivation of endotoxins by steam heat treatment are insufficient and contradictory. It has been reported that endotoxins were not efficiently inactivated by steam heat treatment at 121°C (19, 45). However, Ogawa et al. (31) recently reported that steam heat treatment was efficient in inactivating low concentrations of endotoxin, and that Escherichia coli LPS are unstable in aqueous solutions even at relatively low temperatures such as 70°C (see also reference 40). As mentioned above, these reports have shown that although studies have been carried out on the use of steam heat for depyrogenation, there is little agreement on its efficiency.The U.S. Pharmacopoeia (USP) recommends depyrogenation by dry-heat treatment at temperatures above 220°C for as long as is necessary to achieve a ≥3-log reduction in the activity of endotoxin, if the value is ≥1,000 endotoxin units (EU)/ml (11, 44). Due to the serious risks associated with endotoxins, the U.S. Food and Drug Administration (FDA) has set guidelines for medical devices and parenterals. The protocol to test for endotoxin contamination of medical devices recommends immersion of the device in endotoxin-free water for at least 1 h at room temperature, followed by testing of this extract/eluate for endotoxin. Current FDA limits are such that eluates from medical devices may not exceed 0.5 EU/ml, or 0.06 EU/ml if the device comes into contact with cerebrospinal fluid (43). The term EU describes the biological activity of endotoxins. For example, 100 pg of the standard endotoxin EC-5, 200 pg of EC-2, and 120 pg of endotoxin from E. coli O111:B4 all have an activity of 1 EU (17, 23).Steam heat treatment is comparatively easy to apply and control. If steam heat treatment could reliably inactivate endotoxins, it could be applied with sterilization, reducing labor, time, and expenditure. However, to our knowledge, few studies have addressed steam heat inactivation to determine the chemical and physical reactions that occur during the hydrothermal process, nor have any studies examined the relationship between the steam saturation ratio and the inactivation of endotoxins. Moreover, to date no study has been conducted on steam heat activation of endotoxins with reference to the chemical and physical parameters of the hydrothermal process.We have developed a groundbreaking method to thermoinactivate endotoxins by means of a soft hydrothermal process, in which the steam saturation ratio can be controlled. The steam saturation ratio is calculated as follows: steam saturation ratio (%) = [steam density (kg/m³)/saturated steam density (kg/m³)] × 100.The soft hydrothermal process lies in the part of the liquid phase of water with a high steam saturation ratio that is characterized by a higher ionic product (k_w) than that of ordinary water. The ionic product is a key parameter in promoting ionic reactions and can be related to hydrolysis. The ionic product of water is 1.0 × 10⁻¹⁴ (mol/liter)² at room temperature and increases with increasing temperature and pressure. A high ionic product favors the solubility of highly polar and ionic compounds, creating the possibility of accelerating the hydrolysis reaction process of organic compounds. Thus, water can play the role of both an acidic and an alkaline catalyst in the hydrothermal process (Fig. ​(Fig.1)1) (1, 37, 46). However, the soft hydrothermal process lies in the high-density water molecular area of the steam-gas biphasic field (Fig. ​(Fig.1)1) and is characterized by a lower dielectric constant (ɛ) than that of ordinary water. This process opens the possibility of promoting the affinity of water for nonpolar or low-polarity compounds, such as lipophilic organic compounds (46). We previously reported that most of the predominant aromatic hydrocarbons were removed from softwood bedding that had been treated by soft hydrothermal processing (24, 28).Open in a separate windowFIG. 1.Reaction field in the pressure-temperature relationship of water. The curve represents the saturated vapor pressure curve. The fields show where the pressure-temperature relationships are conducive to a variety of hydrothermal processing conditions, in which water has a large impact as a reaction medium. Because high-density water has a large dielectric constant and ionic product, it is an effective reaction medium for advancing ionic reactions, whereas water (in the form of steam) on the lower-pressure side of the saturated vapor pressure curve shows a good ability to form materials by covalent bonding. Small changes in the density of water can result in changes in the chemical affinity, which has the potential to advance a range of ionic and radical reactions.The purpose of the present study was to evaluate the thermoinactivation of endotoxins by the soft hydrothermal process, by controlling the steam saturation ratio, temperature, and time of treatment. There have been reports that endotoxins were thermoinactivated by steam heat treatment at 121°C in the presence of a nonionic surfactant and at over 135°C in its absence (4, 5, 10), but the minimum temperature for the inactivation of endotoxin remained unknown. This report provides the answer to this question.     

Epithelial–mesenchymal transition of A549 cells is enhanced by co-cultured with THP-1 macrophages under hypoxic conditions

Epithelial–mesenchymal transition (EMT) is associated with pulmonary fibrosis, including idiopathic pulmonary fibrosis (IPF). In this study, we investigated EMT of human pulmonary epithelial-derived cells (A549). A549 cells was either cultured by itself or co-cultured with THP-1 macrophages under normoxic (21% O₂) and hypoxic (2% O₂) conditions. We evaluated the presence of EMT by determining the expression of EMT markers, E-cadherin, vimentin, and fibronectin. To determine the role of TGF-β1 and IL-1β in EMT of the A549 cells, we analyzed the effects of blocking their activity with TGF-β1 inhibitor or IL-1β neutralizing antibody respectively. The A549 cells presented EMT when they were co-cultured with THP-1 macrophages. The EMT of the A549 cells co-cultured with THP-1 macrophages was exacerbated under hypoxia. In addition, the EMT were prevented by the addition of TGF-β1 type I receptor kinase inhibitor. The hypoxic condition increased the mRNA levels of TGF-β1 in A549 cells and THP-1 macrophages and that of IL-1β in THP-1 macrophages when each cells were co-cultured. Anti-IL-1β neutralizing antibody attenuated TGF-β1 secretion in co-culture media under hypoxic conditions. Thus, the IL-1β from THP-1 macrophages up-regulated the TGF-β1 from A549 cells and THP-1 macrophages, and then the TGF-β1 from both cells induced and promoted the EMT of A549 cells when they were co-cultured under hypoxia. Together, these results demonstrate that the interaction between type II pneumocytes and macrophages under hypoxia is necessary for the development of pulmonary fibrosis.     

New 2(3-->20)abeotaxane and 3,11-cyclotaxane from needles of Taxus cuspidata

Two new taxoid metabolites, 2alpha,7beta,10beta-triacetoxy-5alpha,13alpha-dihydroxy-2(3-->20)abeotaxa-4(20),11-dien-9-one (1) and 2alpha-acetoxy-5alpha-cinnamoyloxy-9alpha,10beta-dihydroxy-3,11-cyclotax-4(20)-en-13-one (2), were isolated from the methanol extract of needles of the Japanese yew, Taxus cuspidata.     

Tumor marker measurements of cells in a fine needle used for aspiration cytology

OBJECTIVE: To investigate whether the needle washing could yield sufficient cells for tumor marker (TM) measurements as an ancillary technique to ensure the accuracy of fine needle aspiration cytology (FNAC) of tumors. STUDY DESIGN: After obtaining preliminary data that aspirated tumor cells within a 22-gauge needle could be collected by washing it with distilled water for TM measurements, we studied tumor cell numbers and TM values obtained by washing a 22-gauge needle directly after tumor aspiration and another needle after FNAC. RESULTS: Using 8 resected hepatobiliary and pancreatic carcinomas, the used needles yielded 16.8+/-10.5 x 10(4) cells per milliliter. Used needles from 6 adenocarcinomas expelled 479.2+/-406.5 ng/mL of carcinoembryonic antigen, and 6,561.3+/-5,713.1 ng/mL of CA 19-9, while the needles from 2 hepatomas showed normal values of those markers. CONCLUSION: A needle used for FNAC contains sufficient cells for TM measurements, which can be ancillary to the differential diagnosis.     

Structural insights into the regulatory mechanism of IP3 receptor

Inositol 1,4,5-trisphosphate receptors (IP(3)R) are intracellular Ca(2+) release channels whose opening requires binding of two intracellular messengers IP(3) and Ca(2+). The regulation of IP(3)R function has also been shown to involve a variety of cellular proteins. Recent biochemical and structural analyses have deepened our understanding of how the IP(3)-operated Ca(2+) channel functions. Specifically, the atomic resolution structure of the IP(3)-binding region has provided a sound structural basis for the receptor interaction with the natural ligand. Electron microscopic studies have also shed light on the overall shape of the tetrameric receptor. This review aims to provide comprehensive overview of the current information available on the structure and function relationship of IP(3)R.     

Regulation of osteoclastogenesis by three human RANKL isoforms expressed in NIH3T3 cells

Receptor activator of nuclear factor-kappaB ligand (RANKL) induces osteoclastogenesis by binding with the receptor, receptor activator of nuclear factor-kappaB in the presence of macrophage colony-stimulating factor. Three human RANKL isoforms, hRANKL1, hRANKL2, and hRANKL3, were identified. hRANKL1 was identical to previously reported RANKL and possessed intracellular, transmembrane, and extracellular domains, hRANKL2 did not have the intracellular domain, and hRANKL3 did not have the intracellular and transmembrane domains. When bone marrow macrophages were cultured with NIH3T3 cells expressing hRANKL1, osteoclasts were formed, but when cultured with NIH3T3 cells expressing hRANKL2 or hRANKL3, no tartrate resistant acid phosphatase-positive cell was observed. In the coculture system, coexpression of hRANKL3 with hRANKL1 significantly inhibited the formation of osteoclasts by hRANKL1, but coexpression of hRANKL2 with hRANKL1 did not affect the osteoclastogenesis by hRANKL1 significantly. These results suggest that the activity of osteoclastogenesis by hRANKL1 is regulated by the attenuator, hRANKL3.     

Simultaneous visualization of rDNA clusters and the nucleolus by combining fluorescence in situ hybridization and silver staining.

We designed two procedures to visualize simultaneously clusters of ribosomal RNA genes (rDNA) and the nucleolus in plant cells. The procedures combine fluorescence in situ hybridization (FISH) to visualize the rDNA clusters and silver staining to observe the nucleolus. When FISH is followed by silver staining, many minute FISH signals are localized in the nucleolus, and several large FISH signals are seen on the nucleolar periphery. When FISH was applied to the specimens with silver nitrate staining, large FISH signals were visualized in the nucleoplasm associated with the nucleolar periphery, but no signals were seen in the nucleoli. Thus, the two combinations of FISH and silver staining provided different details regarding the arrangement of rDNA clusters in the nucleolus of plant cells.