Carotenoid production from hydrolyzed molasses by Dietzia natronolimnaea HS-1 using batch,fed-batch and continuous culture

The different cultivation strategies of batch, fed-batch and continuous culture for the synthesis of biomass and carotenoids by Dietzia natronolimnaea HS-1 from waste molasses and its hydrolysate were compared. The efficiency of three various pretreatments (enzymatic, acidic and acidic at high temperature) for the determination of the best hydrolysate was also studied by evaluating the conversion rate of sucrose. The analytical procedures initially showed that canthaxanthin (CTX) and enzymatic hydrolysis were the most abundant pigment biosynthesized and the most suitable process for the substrate production, respectively. An increase in reducing sugar concentration of the enzymatic hydrolysate molasses (EHM) from 25 to 50 g/l led to a drastic decrease in biomass formation and substrate utilization. EHM (25 g/l) was a better substrate for the cell growth and product formation than the waste molasses (25 g/l). The application of EHM instead of molasses enhanced the biomass production in fed-batch culture more than batch and continuous cultures. However, the continuous cultivation had the highest biomass (12.98 g/l), carotenoid (27.33 mg/l) and CTX (25.04 mg/l) yields with 25 g/l of EHM. The CTX isolated from D. natronolimnaea HS-1 may be used as a natural antioxidant for possible production of healthy-functional foods in the future.     

Molecular Identification and Antifungal Susceptibility of Yeasts and Molds Isolated from Patients with Otomycosis

Mycopathologia - Fungal otitis externa, an infection of the external auditory canal caused by molds and yeasts, accounts for approximately 10–20% of ear canal infections accompanying high...     

Monte Carlo dose calculation of GZP6 60Co stepping source based on a matrix shift technique

Background

As a routine method for stepping source simulation, a Monte Carlo program is run according to the number of steps and then the summation of dose from each run is taken to obtain total dose distribution. This method is time consuming.

Aim

As an alternative method, a matrix shift based technique was applied to simulate a stepping source for brachytherapy.

Materials and methods

The stepping source of GZP6 brachytherapy unit was simulated. In a matrix shift method, it is assumed that a radiation source is stationary and instead the data matrix is shifted based on the number of steps. In this study, by running MCNPX program for one point and calculation of the dose matrix using the matrix shift method, the isodose curves for the esophageal cancer tumor lengths of 4 and 6 cm were obtained and compared with the isodose curves obtained by running MCNPX programs in each step position separately (15 and 23 steps for esophageal cancer tumor lengths of 4 and 6 cm, respectively).

Results

The difference between the two dose matrixes for the stepping and matrix shift methods based on the average dose differences are 3.85 × 10⁻⁴ Gy and 5.19 × 10⁻⁴ Gy for treatment length of 4 cm and 6 cm, respectively. Dose differences are insignificant and these two methods are equally valid.

Conclusions

The matrix shift method presented in this study can be used for calculation of dose distribution for a brachytherapy stepping source as a quicker tool compared to other routine Monte Carlo based methods.     

Partitioning of amino acids in the aqueous biphasic system containing the water‐miscible ionic liquid 1‐butyl‐3‐methylimidazolium bromide and the water‐structuring salt potassium citrate

In biotechnology, extraction by means of aqueous biphasic systems (ABS) is known as a promising tool for the recovery and purification of bio‐molecules. Over the past decade, the increasing emphasis on cleaner and environmentally benign extraction procedures has led to enhanced interest in the ABS containing ionic liquids (ILs)—a new class of non‐volatile alternative solvents. ABS composed of the hydrophilic IL {1‐butyl‐3‐methylimidazolium bromide ([C₄mim]Br)} and potassium citrate—which is easily degraded—represents a clean media to green separation of bio‐molecules. In this regard, here, the extraction capability of this ABS was evaluated through its application to the extraction of some amino acids. To gain an insight into the driving forces of amino acid partitioning in the studied IL ‐based ABS, the distribution of five model amino acids (L ‐tryptophan, L ‐phenylalanine, L ‐tyrosine, L ‐leucine, and L ‐valine) at different aqueous medium pH values and different phase compositions was investigated. The studies indicated that hydrophobic interactions were the main driving force, although electrostatic interactions and salting‐out effects were also important for the transfer of the amino acids. Moreover, based on the statistical analysis of the driving forces of amino acid partitioning in the studied IL ‐based ABS, a model was established to describe the partition coefficient of three model amino acids, L ‐tryptophan, L ‐phenylalanine, and L ‐valine, and employed to predict the partition coefficient of two other model amino acids, L ‐tyrosine and L ‐leucine. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Genetic Characterization of Escherichia coli O157:H7 Strains Isolated from the One-Humped Camel (Camelus dromedarius) by Using Microarray DNA Technology

From the Camelidae family members, several serotypes of Escherichia coli (E. coli) have recently been isolated from diarrhoeic and non-diarrhoeic faecal samples. To date Shiga toxin-producing E. coli (STEC) strains have never been typed in one-humped camel (Camelus dromedarius). In the present study, two E. coli O157:H7 strains isolated from sick dromedaries were investigated. Virulence gene profiles were determined using a custom E. coli virulence DNA microarray, composed of 70-mer oligonucleotide probes targeting 264 virulence or related genes of known E. coli pathotypes. Both strains displayed positive hybridization signals for the Locus of enterocyte effacement (LEE) gene probes (ler, eae, espA, espB, tir genes), two Shiga toxin probes (stx1 and stx2), the O157 O-antigen specific probe, various virulence plasmid (pO157) probes like katP in addition to other accessory virulence genes characterized in STEC.     

A fluorescent aptasensor for analysis of adenosine triphosphate based on aptamer–magnetic nanoparticles and its single‐stranded complementary DNA labeled carbon dots

A new fluorimetric aptasensor was designed for the determination of adenosine triphosphate (ATP) based on magnetic nanoparticles (MNPs) and carbon dots (CDs). In this analytical strategy, an ATP aptamer was conjugated on MNPs and a complementary strand of the aptamer (CS) was labeled with CDs. The aptamer and its CS were hybridized to form a double helical structure. The hybridized aptamers could be used for the specific recognition of ATP in a biological complex matrix using a strong magnetic field to remove the interfering effect. In the absence of ATP, no CDs–CS could be released into the solution and this resulted in a weak fluorescence signal. In the presence of ATP, the target binds to its aptamer and causes the dissociation of the double helical structure and liberation of the CS, such that a strong fluorescence signal was generated. The increased fluorescence signal was proportional to ATP concentration. The limit of detection was estimated to be 1.0 pmol L^–1 with a dynamic range of 3.0 pmol L^–1 to 5.0 nmol L^–1. The specific aptasensor was applied to detect ATP in human serum samples with satisfactory results. Moreover, molecular dynamic simulation (MDS) studies were used to analyze interactions of the ATP molecule with the aptamer.     

Genomic characterisation,detection of genes encoding virulence factors and evaluation of antibiotic resistance of <Emphasis Type="Italic">Trueperella pyogenes</Emphasis> isolated from cattle with clinical metritis

Trueperella pyogenes is one of the most important microorganisms causing metritis in post-partum cattle. Co-infection with other bacterial species such as Escherichia coli or Fusobacterium necrofurom increases the severity of the disease and the persistence of bacteria in utero. The aim of this study was to investigate the frequency of T. pyogenes strains, and their virulence and antimicrobial resistant profiles in metritis cases. The study was carried out on 200 samples obtained from metritis discharges of postpartum cattle on 18 farms around Tehran, Iran. Sixty-five T. pyogenes isolates (32.5%) were identified, of which 16 isolates were detected as pure cultures and the other 49 isolates from cultures most commonly mixed with E. coli or F. necrofurom. In terms of diversity in biochemical characteristic of T. pyogenes strains, 8 different biotypes were identified among the isolates. Single or multi antimicrobial resistance was observed in 48 isolates (73.9%), which was mostly against trimethoprim sulfamethoxazole, azithromycin, erythromycin and streptomycin. The tetracycline resistance gene tetW and macrolide resistance genes ermB and ermX were detected in 30, 18 and 25 isolates, respectively. In the screening of genes encoding virulence factors, fimA and plo genes were identified in all tested isolates. Genes encoding nanP, nanH, fimC, fimG, fimE and cbpA were detected in 50, 54, 45, 40, 50 and 37 of isolates, respectively. Thirteen different genotypes were observed in these T. pyogenes isolates. A significant association between clonal types and virulence factor genes, biochemical profile, CAMP test result, severity of the disease and sampling time was detected.     

A novel peptide mimicking the interaction of α-neurotoxins with acetylcholine receptor

A peptide corresponding to residues 26–41 of α-bungarotoxin, and closed by a disulfide bond between two cysteine residues at the amino and C terminal ends of the peptide, was synthesized and the monomeric form was purified. The peptide, which represents the exposed part of the long central loop of the toxin molecule, was examined for binding to acetylcholine receptor. The peptide was shown by radiometric titrations to bind radiolabeled receptor, and radiolabeled peptide was bound by receptor. The specificity of the binding was confirmed by inhibition with the parent toxin. A synthetic analog of the peptide in which Trp-28 was replaced by glycine had very little (10%) of the original activity. Succinylation of the amino groups of the peptide resulted in virtually complete (98%) loss of the binding activity. These results indicate that a shortened loop peptide corresponding to the region 26–41 of α-bungarotoxin exhibits binding activities mimicking those of the parent molecule. In this region, Trp-28, and one or both of Lys-26 and Lys-38, are essential contact residues in the binding to receptor.     

Mapping by synthetic peptides of the binding sites for acetylcholine receptor on alpha-bungarotoxin

A set of seven peptides constituting the various loops and most of the surface areas of -bungarotoxin (BgTX) was synthesized. In appropriate peptides, the cyclical (by a disulfide bond) monomers were prepared. In all cases, the peptides were purified and characterized. The ability of these peptides to bindTorpedo californica acetylcholine receptor (AChR) was studied by radiometric adsorbent titrations. Three regions, represented by peptides 1–16, 26–41, and 45–59, were able to bind¹²⁵I-labeled AChR and, conversely,¹²⁵I-labeled peptides were bound by AChR. In these regions, residues Ile-1, Val-2, Trp-28 and/or Lys-38, and one or all of the three residues Ala-45, Ala-46, and Thr-47, are essential contact residues in the binding of BgTX to receptor. Other synthetic regions of BgTX showed little or no AChR-binding activity. The specificity of AChR binding to peptides 1–16, 26–41, and 45–59 was confirmed by inhibition with unlabeled BgTX. It is concluded that BgTX has three main AChR-binding regions (loop I with N-terminal extension and loops II and III extended toward the N-terminal by residues 45–47).