New taxol assay method using tubulin-assembly stimulation

Summary A novel taxol determination method which involves the tubulin-assembly stimulation is described. The tubulin-assembly was monitored by turbidity change at 350nm. In a limited range of taxol concentration (0 to 24 M), taxol stimulated tubulin-assembly linearly. And this linear relation was observed from 20min to 30min after the reaction started. Bioactive derivatives of taxol, such as cephalomanin and 7-epi-10-deacetyltaxol also stimulated the tubulin-assembly. However, baccatin III, which was known as less active taxol derivative did not stimulate tubulin assembly. This result showed that the stimulation of tubulin assembly has a relationship with the antimiotic activity. This assay method have several advantages. 1) Time required for the measurement is relatively short. 2) Multiple samples can be measured simultaneously. 3) It can remove interference of less active taxane compounds more selectively than immuno-assay. Consequently, this method can be used to determine taxol concentration in biological samples. Especially, this method can be used for large scale selection of cell line and primary screening of new antimiotic compounds.     

The role ofH-2 regions in overcoming tissue incompatibility

Neonatal transplantation tolerance to the products of theH-2 ^b complex was induced in B10.A (H-2 ^a ) mice. On the basis of the survival of skin allografts it was found that antigens determined by theD region of theH-2 ^b complex (of the B10.A(2R) strain) were most easily overcome and that tolerance to the products of theD end of theH-2 complex (of the B10.A(4R) strain) was also easy to induce. The antigens produced by theK end ofH-2 (of the B10.A(5R) and B10.A(3R) strains) represented a stronger incompatibility barrier and a difference in the entireH-2 ^b complex caused strongest resistance to tolerance induction. When tolerance to the products of the entireH-2 ^b complex was induced in newborn B10.A mice, and the neonatally treated animals were grafted simultaneously with five different grafts, those disparate at theK end ofH-2 and in the entireH-2 region were rejected in some animals, while the grafts disparate at theD end of H-2 remained intact in the same mice. No dependence on theI-J subregion was observed in this system. Furthermore, tolerance was more easily inducible in male than in female B10.A mice.     

Thermodynamic stoichiometries of participation of water, cations and anions in specific and non-specific binding of lac repressor to DNA. Possible thermodynamic origins of the "glutamate effect" on protein-DNA interactions.

The objective of this study is to quantify the contributions of cations, anions and water to stability and specificity of the interaction of lac repressor (lac R) protein with the strong-binding symmetric lac operator (Osym) DNA site. To this end, binding constants Kobs and their power dependences on univalent salt (MX) concentration (SKobs = d log Kobs/d log[MX]) have been determined for the interactions of lac R with Osym operator and with non-operator DNA using filter binding and DNA cellulose chromatography, respectively. For both specific and non-specific binding of lac R, Kobs at fixed salt concentration [KX] increases when chloride (Cl-) is replaced by the physiological anion glutamate (Glu-). At 0.25 M-KX, the increase in Kobs for Osym is observed to be approximately 40-fold, whereas for non-operator DNA the increase in Kobs is estimated by extrapolation to be approximately 300-fold. For non-operator DNA, SKobsRD is independent of salt concentration within experimental uncertainty, and is similar in KCl (SKobs,RDKCl = -9.8(+/- 1.0) between 0.13 M and 0.18 M-KCl) and KGlu (SKobs,RDKGlu = -9.3(+/- 0.7) between 0.23 M and 0.36 M-KGlu). For Osym DNA, SKobsRO varies significantly with the nature of the anion, and, at least in KGlu appears to decrease in magnitude with increasing [KGlu]. Average magnitudes of SKobsRO are less than SKobsRD, and, for specific binding decrease in the order [SKobsRO,KCl[>[SKobsRO,KAc[>[SKobsRO,KGlu[ . Neither KobsRO nor SKobsRO is affected by the choice of univalent cation M+ (Na+, K+, NH4+, or mixtures thereof, all as the chloride salt), and SKobsRO is independent of [MCl] in the range examined (0.125 to 0.3 M). This behavior of SKobsRO is consistent with that expected for a binding process with a large contribution from the polyelectrolyte effect. However, the lack of an effect of the nature of the cation on the magnitude of KobsRO at a fixed [MX] is somewhat unexpected, in view of the order of preference of cations for the immediate vicinity of DNA (NH4+ > K+ > Na+) observed by 23Na nuclear magnetic resonance. For both specific and non-specific binding, the large stoichiometry of cation release from the DNA polyelectrolyte is the dominant contribution to SKobs. To interpret these data, we propose that Glu- is an inert anion, whereas Ac- and Cl- compete with DNA phosphate groups in binding to lac repressor. A thermodynamic estimate of the minimum stoichiometry of water release from lac repressor and Osym operator (210(+/- 30) H2O) is determined from analysis of the apparently significant reduction in [SKobsRO,KGlu[ with increasing [KGlu] in the range 0.25 to 0.9 M. According to this analysis, SKobs values of specific and non-specific binding in KGlu differ primarily because of the release of water in specific binding. In KAc and KCl, we deduce that anion competition affects Kobs and SKobs to an extent which differs for different anions and for the different binding modes.     

Some chemical and physical properties of extracellular polysaccharides produced by Butyrivibrio fibrisolvens strains.

Most strains of Butyrivibrio fibrisolvens are known to produce extracellular polysaccharides (EPs). However, the rheological and functional properties of these EPs have not been determined. Initially, 26 strains of Butyrivibrio were screened for EP yield and apparent viscosities of cell-free supernatants. Yields ranged from less than 1.0 to 16.3 mg per 100 mg of glucose added to the culture. Viscosities ranged from 0.71 to 5.44 mPa.s. Five strains (CF2d, CF3, CF3a, CE51, and H10b) were chosen for further screening. The apparent viscosity of the EP from each of these strains decreased by only 50 to 60% when the shear rate was increased from 20 to 1,000 s-1. Strain CE51 produced the EP having the highest solution viscosity. A detailed comparison of shear dependency of the EP from strain CF3 with xanthan gum showed that this EP was less shear sensitive than xanthan gum and, at a shear rate of 1,000 s-1, more viscous. EPs from strains CF3 and H10b were soluble over a wide range of pH (1 to 13) in 80% (vol/vol) ethanol-water or in 1% (wt/vol) salt solutions. The pH of 1% EP solutions was between 4.5 and 5.5. Addition of acid increased solution viscosities, whereas addition of base decreased viscosity. EPs from strains CF3, CE51, and H10b displayed qualitatively similar infrared spectra. Calcium and sodium were the most abundant minerals in the three EPs. The amounts of magnesium, calcium, and iron varied considerably among the EPs, but the potassium contents remained relatively constant.     

Work flow control in the flexible flow line

This research involves the development and evaluation of a part flow control model for a type of flexible manufacturing system (FMS) called a dedicated flexible flow line (FFL). In the FFL, all part types flow along the same path between successive machine groups. The specific objective of the part flow control model for the FFL is to minimize makespan for a given set of parts produced in a FFL near-term schedule, given fixed available buffer constraints. The control model developed in this research involved the repeated, real-time execution of a mathematical programming algorithm. The algorithm attempts to release the right mix of parts at the tight time to keep the FFL operating smoothly. The focus of the approach is directed toward managing WIP buffers for each machine group queue. The algorithm specifically incorporates stochastic disturbance factors such as machine failures. Through a limited number of simulation experiments, performance of the control model is shown to be superior to other parts releasing and control methods reported in the literature.     

Processing of Ada protein by two serine endoproteases Do and So from Escherichia coli

Two soluble serine proteases Do and So from Escherichia coli were found to distinctively cleave the purified, 39 kDa Ada protein into fragments with sizes of 12-31 kDa. Protease So appears to generate a C-terminal 19 kDa polypeptide, similarly to OmpT protease. In addition, the purified 19 kDa C-terminal half of Ada protein can be further processed mainly to an 18 kDa fragment by protease So and to a 12 kDa by protease Do. These results suggest that proteases Do and So are involved in endogenous cleavage of Ada protein, which may play a role in down-regulating the adaptive response to alkylating agents.