Thin‐Film Solar Cells with InP Absorber Layers Directly Grown on Nonepitaxial Metal Substrates

The design and performance of solar cells based on InP grown by the nonepitaxial thin‐film vapor–liquid–solid (TF‐VLS) growth technique is investigated. The cell structure consists of a Mo back contact, p‐InP absorber layer, n‐TiO₂ electron selective contact, and indium tin oxide transparent top electrode. An ex situ p‐doping process for TF‐VLS grown InP is introduced. Properties of the cells such as optoelectronic uniformity and electrical behavior of grain boundaries are examined. The power conversion efficiency of first generation cells reaches 12.1% under simulated 1 sun illumination with open‐circuit voltage (V_OC) of 692 mV, short‐circuit current (J_SC) of 26.9 mA cm^?2, and fill factor (FF) of 65%. The FF of the cell is limited by the series resistances in the device, including the top contact, which can be mitigated in the future through device optimization. The highest measured V_OC under 1 sun is 692 mV, which approaches the optically implied V_OC of ≈795 mV extracted from the luminescence yield of p‐InP.     

Morphological variation in the horse: defining complex traits of body size and shape

Horses, like many domesticated species, have been selected for broad variation in skeletal size. This variation is not only an interesting model of rapid evolutionary change during domestication, but is also directly applicable to the horse industry. Breeders select for complex traits like body size and skeletal conformation to improve marketability, function, soundness and performance in the show ring. Using a well-defined set of 35 measurements, we have identified and quantified skeletal variation in the horse species. We collected measurements from 1215 horses representing 65 breeds of diverse conformation such as the American Miniature, Shetland Pony, Arabian Horse, Thoroughbred, Shire and Clydesdale. Principal components analysis has identified two key dimensions of skeletal variation in the horse. Principal component 1 is positively correlated with every measurement and quantifies overall body size. Principal component 2 captures a pattern of bone widths vs. lengths and thus quantifies variation in overall bone thickness. By defining these complex skeletal traits, we have created a framework for whole genome association studies to identify quantitative trait loci that contribute to this variation.     

A Simple Genetic Architecture Underlies Morphological Variation in Dogs

Domestic dogs exhibit tremendous phenotypic diversity, including a greater variation in body size than any other terrestrial mammal. Here, we generate a high density map of canine genetic variation by genotyping 915 dogs from 80 domestic dog breeds, 83 wild canids, and 10 outbred African shelter dogs across 60,968 single-nucleotide polymorphisms (SNPs). Coupling this genomic resource with external measurements from breed standards and individuals as well as skeletal measurements from museum specimens, we identify 51 regions of the dog genome associated with phenotypic variation among breeds in 57 traits. The complex traits include average breed body size and external body dimensions and cranial, dental, and long bone shape and size with and without allometric scaling. In contrast to the results from association mapping of quantitative traits in humans and domesticated plants, we find that across dog breeds, a small number of quantitative trait loci (≤3) explain the majority of phenotypic variation for most of the traits we studied. In addition, many genomic regions show signatures of recent selection, with most of the highly differentiated regions being associated with breed-defining traits such as body size, coat characteristics, and ear floppiness. Our results demonstrate the efficacy of mapping multiple traits in the domestic dog using a database of genotyped individuals and highlight the important role human-directed selection has played in altering the genetic architecture of key traits in this important species.     

Europium (III) complexes derived from carboxylic-substituted polychlorotriphenylmethyl radicals

Two europium (III) complexes (3 and 4) have been obtained reacting europium (III) nitrate and two polychlorotriphenylmethyl radicals properly functionalized with one (PTMMC⁻, 1) and six (PTMHC⁶⁻, 2) carboxylate groups, respectively. While complex 3 reveals a lamellar polar-apolar separated ion pair structure alternating PTM-based bilayers with nonaaquaeuropium cations ([Eu(H₂O)₉](PTMMC)₃(PTMMCH)₃ · 7H₂O · 6EtOH), complex 4 shows a one-dimensional chain-like structure with formula [Eu₂(PTMHC)(H₂O)₁₃] · 16H₂O · EtOH. Magnetic properties of both complexes were studied in the 2-300 K range, and show the presence of weak inter-radical antiferromagnetic interactions below 5 K.     

Similar hypotensive responses to resistance exercise with and without blood flow restriction

Low intensity resistance exercise (RE) with blood flow restriction (BFR) has gained attention in the literature due to the beneficial effects on functional and morphological variables, similar to those observed during traditional RE without BFR, while the effects of BFR on post-exercise hypotension remain unclear. The aim of the present study was to compare the blood pressure (BP) response of trained normotensive individuals to RE with and without BFR. In this cross-over randomized trial, eight male subjects (23.8 ± 4 years, 74 ± 3 kg, 174 ± 4 cm) completed two exercise protocols: traditional RE (3 x 10 repetitions at 70% one-repetition maximum [1-RM]) and low intensity RE (3 x 15 repetitions at 20% 1-RM) with BFR. Blood pressure measurements were performed after 15 min of seated rest (0), immediately after and 10 min, 20 min, 30 min, 40 min, 50 min and 60 min after the experimental sessions. Similar hypotensive effects for systolic BP (SBP) were observed for both protocols (P < 0.05) after exercise, with no differences between groups (P > 0.05) and no statistically significant difference for diastolic BP (P > 0.05). These results suggest that in normotensive trained individuals, both traditional RE and RE with BFR induce hypotension for SBP, which is important to prevent cardiovascular disturbances.     

Delayed appearance of high altitude retinal hemorrhages

Background

Retinal hemorrhages have been described as a component of high altitude retinopathy (HAR) in association with altitude illness. In this prospective high altitude study, we aimed to gain new insights into the pathophysiology of HAR and explored whether HAR could be a valid early indicator of altitude illness.

Methodology/Principal Findings

28 mountaineers were randomly assigned to two ascent profiles during a research expedition to Mt. Muztagh Ata (7546 m/24,751 ft). Digital fundus photographs were taken prior to expedition at 490 m (1,607 ft), during expedition at 4497 m (14,750 ft = base camp), 5533 m (18,148 ft), 6265 m (20,549 ft), 6865 m (22,517 ft) and 4.5 months thereafter at 490 m. Number, size and time of occurrence of hemorrhages were recorded. Oxygen saturation (SpO₂) and hematocrit were also assessed. 79% of all climbers exhibited retinal hemorrhages during the expedition. Number and area of retinal bleeding increased moderately to medium altitudes (6265 m). Most retinal hemorrhages were detected after return to base camp from a high altitude. No post-expeditional ophthalmic sequelae were detected. Significant negative (SpO₂ Beta: −0.4, p<0.001) and positive (hematocrit Beta: 0.2, p = 0.002, time at altitude Beta: 0.33, p = 0.003) correlations with hemorrhages were found.

Conclusions/Significance

When closely examined, a very large amount of climbers exhibit retinal hemorrhages during exposure to high altitudes. The incidence of retinal hemorrhages may be greater than previously appreciated as a definite time lag was observed between highest altitude reached and development of retinal bleeding. Retinal hemorrhages should not be considered warning signs of impending severe altitude illness due to their delayed appearance.     

Adelphocorisella Miyamoto and Yasunaga newly recorded from Australia, with the description of a new species (Heteroptera: Miridae: Mirinae)

Adelphocorisella australis sp. n. is described from north Queensland. This, the first representative of the genus known from Australia, is compared with the two previously described species, both from Japan.