Purification and properties of an extracellular esterase from a cold-adapted <Emphasis Type="Italic">Pseudomonas mandelii</Emphasis>

An extracellular esterase, EstK, was purified from the psychrotrophic bacterium Pseudomonas mandelii grown at 25°C. Prior to harvest, cells were treated with 0.2 M MgCl₂ to precipitate lipopolysaccharides in the outer membranes, which otherwise form aggregates with the secreted enzymes. EstK was purified to homogeneity using standard procedures. It had substrate specificity towards esters of short-chain fatty acids, particularly, p-nitrophenyl acetate. Optimum activity of EstK was at 40°C; at 4°C the activity was ~50% of its maximum. EstK has a unique substrate preference for p-nitrophenyl acetate and remains active at low temperatures.     

Butanol production from renewable biomass: rediscovery of metabolic pathways and metabolic engineering

Biofuel from renewable biomass is one of the answers to help solve the problems associated with limited fossil resources and climate change. Butanol has superior liquid-fuel characteristics, with similar properties to gasoline, and thus, has the potential to be used as a substitute for gasoline. Clostridia are recognized as a good butanol producers and are employed in the industrial-scale production of solvents. Due to the difficulty of performing genetic manipulations on clostridia, however, strain improvement has been rather slow. Furthermore, complex metabolic characteristics of acidogenesis followed by solventogenesis in this strain have hampered the development of engineered clostridia strains with highly efficient and selective butanol-production capabilities. In recent years, the butanol-producing characteristics in clostridia have been further characterized and alternative pathways discovered. More recently, systems-level metabolic engineering approaches were taken to develop superior strains. Herein, we review recent discoveries of metabolic pathways for butanol production and the metabolic engineering strategies being developed.     

Effects of magnolol (5,5'-diallyl-2,2'-dihydroxybiphenyl) on diabetic nephropathy in type 2 diabetic Goto-Kakizaki rats

We investigated the effect of magnolol (5,5'-diallyl-2,2'-dihydroxybiphenyl), a marker compound isolated from the cortex of Magnolia officinalis, in non-obese type 2 diabetic Goto-Kakizaki (GK) rats. The rats were treated orally with magnolol (100 mg/kg body weight) once a day for 13 weeks. In magnolol-treated GK rats, fasting blood glucose and plasma insulin were significantly decreased, and the pancreatic islets also showed strong insulin antigen positivity. Urinary protein and creatinine clearance (Ccr) were significantly decreased. Pathological examination revealed the prevention of the glomeruli enlargement in magnolol-treated GK rats. The overproduction of renal sorbitol, advanced glycation endproducts (AGEs), type IV collagen, and TGF-beta1 mRNA were significantly reduced in magnolol-treated GK rats. Thus based on our findings, the use of magnolol could result in good blood glucose control and prevent or retard development of diabetic complications such as diabetic nephropathy.     

A novel mutation in the SCN5A gene is associated with Brugada syndrome

Brugada syndrome (BS) is an inherited cardiac disorder associated with a high risk of sudden cardiac death and is caused by mutations in the SCN5A gene encoding the cardiac sodium channel alpha-subunit (Na(v)1.5). The aim of this study was to identify the genetic cause of familial BS and characterize the electrophysiological properties of a novel SCN5A mutation (W1191X). Four families and one patient with BS were screened for SCN5A mutations by PCR and direct sequencing. Wild-type (WT) and mutant Na(v)1.5 channels were expressed in tsA201 cells, and the sodium currents (I(Na)) were analyzed using the whole-cell patch-clamp technique. A novel mutation, W1191X, was identified in a family with BS. Expression of the WT or the mutant channel (Na(v)1.5/W1191X) co-transfected with the beta(1)-subunit in tsA201 cells resulted in a loss of function of Na(v)1.5 channels. While voltage-clamp recordings of the WT channel showed a distinct acceleration of Na(v)1.5 activation and fast inactivation kinetics, the Na(v)1.5/W1191X mutant failed to generate any currents. Co-expression of the WT channel and the mutant channel resulted in a 50% reduction in I(Na). No effect on activation and inactivation were observed with this heterozygous expression. The W1191X mutation is associated with BS and resulted in the loss of function of the cardiac sodium channel.     

Improvement of canine somatic cell nuclear transfer procedure

The purpose of the present study on canine somatic cell nuclear transfer (SCNT) was to evaluate the effects of fusion strength, type of activation, culture media and site of transfer on developmental potential of SCNT embryos. We also examined the potential of enucleated bovine oocytes to serve as cytoplast recipients of canine somatic cells. Firstly, we evaluated the morphological characteristics of in vivo-matured canine oocytes collected by retrograde flushing of the oviducts 72 h after ovulation. Secondly, the effectiveness of three electrical strengths (1.8, 2.3 and 3.3 kV/cm), used twice for 20 micros, on fusion of canine cytoplasts with somatic cells were compared. Then, we compared: (1) chemical versus electrical activation (a) after parthenogenetic activation or (b) after reconstruction of canine oocytes with somatic cells; (2) culture of resulting intergeneric (IG) embryos in either (a) mSOF or (b) TCM-199. The exposure time to 6-DMAP was standardized by using bovine oocytes reconstructed with canine somatic cells. Bovine oocytes were used for SCNT after a 22 h in vitro maturation interval. The fusion rate was significantly higher in the 3.3 kV/cm group than in the 1.8 and 2.3 kV/cm treatment groups. After parthenogenesis or SCNT with chemical activation, 3.4 and 5.8%, respectively, of the embryos developed to the morula stage, as compared to none of the embryos produced using electrical activation. Later developmental stages (8-16 cells) were transferred to the uterine horn of eight recipients, but no pregnancy was detected. However, IG cloned embryos (bovine cytoplast/canine somatic cell) were capable of in vitro blastocyst development. In vitro developmental competence of IG cloned embryos was improved after exposure to 6-DMAP for 4 h as compared to 0, 2 or 6h exposure, although the increase was not significantly different among culture media. In summary, for production of canine SCNT embryos, we recommend fusion at 3.3 kV/cm, chemical activation, culture in mSOF medium and transfer of presumptive zygotes to the oviduct of recipient animals. The feasibility of IG production of cloned canine embryos using bovine cytoplasts as recipient of canine somatic cells was demonstrated.     

Effect of maternal restraint stress on fetal development of ICR mice.

The present study was conducted to elucidate the susceptibility of embryos and fetuses at different gestational stages to the maternal stress in mice. Groups of pregnant ICR mice were subjected to daily 12-h restraint stress, taped in the supine position on a plastic board, on gestational days (GD) 1-4, 5-8, 9-12 and 13-16, respectively. Caesarean sections were performed on gestational day 18, and the fetuses were weighed and examined for morphological defects. During the daily restraint for 4 days, the maternal body weights markedly decreased. Although the body weights recovered gradually after termination of the stress, the recovery was not full until the final stage of pregnancy. Interestingly, restraint stress caused growth retardation of the fetuses, leading to a significant decrease in their body weights, and increased early and late resorptions of embryos and fetuses according to the stress periods. Although the preceding (GD1-4) and concurrent (GD5-8) stresses did not affect embryonic implantation, restraint stress on GD9-12 caused cleft palate. Whereas vertebral abnormalities, mainly bipartite ossification, were observed only in animals stressed on GD5-8, abnormalities of sternebrae, exhibiting asymmetric or bipartite ossification, were enhanced by the stress at all of the gestational stages. On the other hand, the incidence of other malformations including renal malposition and costal abnormalities was not increased by stress at any of the 4 stages. Taken together, the results suggest that intensive restraint stress influences the maternal body weight resulting in growth retardation and increased mortality of embryos and fetuses, in addition to gestational stage-specific ventricular dilatation, cleft palate and sternal abnormalities.     

Enhancement of the thermostability of a recombinant β-agarase, AgaB, from Zobellia galactanivorans by random mutagenesis

Random mutagenesis was performed on β-agarase, AgaB, from Zobellia galactanivorans to improve its catalytic activity and thermostability. The activities of three mutants E99K, T307I and E99K–T307I were approx. 140, 190 and 200%, respectively, of wild type β-agarase (661 U/mg) at 40°C. All three mutant enzymes were stable up to 50°C and E99K–T307I had the highest thermostability. The melting temperature (T _m) of E99K–T307I, determined by CD spectra, was increased by 5.2°C over that of the wild-type enzyme (54.6°C). Activities of both the wild-type and E99K–T307I enzymes, as well as their overall thermostabilities, increased in 1 mM CaCl₂. The E99K–T307I enzyme was stable at 55°C with 1 mM CaCl₂, reaching 260% of the activity the wild-type enzyme held at 40°C without CaCl₂.     

Verification of Beam Models for Ionic Polymer-Metal Composite Actuator

Ionic Polymer-Metal Composite (IPMC) can work as an actuator by applying a few voltages.A thick IPMC actuator,whereNafion-117 membrane was synthesized with polypyrrole/alumina composite filler,was analyzed to verify the equivalent beamand equivalent bimorph beam models.The blocking force and tip displacement of the IPMC actuator were measured with a DCpower supply and Young’s modulus of the IPMC strip was measured by bending and tensile tests respectively.The calculatedmaximum tip displacement and the Young’s modulus by the equivalent beam model were almost identical to the correspondingmeasured data.Finite element analysis with thermal analogy technique was utilized in the equivalent bimorph beam model tonumerically reproduce the force-displacement relationship of the IPMC actuator.The results by the equivalent bimorph beammodel agreed well with the force-displacement relationship acquired by the measured data.It is confirmed that the equivalentbeam and equivalent bimorph beam models are practically and effectively suitable for predicting the tip displacement,blockingforce and Young’s modulus of IPMC actuators with different thickness and different composite of ionic polymer membrane.     

Proteome analysis of rice blast fungus (Magnaporthe grisea) proteome during appressorium formation

We used two-dimensional gel electrophoresis (2-DE) to identify the proteins that are induced in the rice blast fungus Magnaporthe grisea during appressorium formation. Proteins were extracted from conidia that had germinated on hydrophilic glass plates or from germinated and appressoria-forming conidia on leaf wax-coated hydrophobic glass plates after 4, 8, and 12 h of incubation. Differentially expressed protein spots during appressorium formation were confirmed from gels after 2-DE analysis where proteins had been labeled with (35)S methionine and stained with silver. Internal amino acid sequencing identified five proteins among several proteins induced during appressorium formation. Two denoted as M. grisea proteasome homolgues (MgP1 and MgP5) were 20S proteasome alpha subunits. The remaining three were scytalone dehydratase (SCD), and serine carboxypeptidase Y (CPY). None of the five have been reported previously in the rice blast fungus apart from SCD. We further investigated the role the alpha subunit of 20S proteasome plays in appressorium formation. We confirmed by Western blot analysis that MgP5 is highly expressed during appressorium formation and found that it is also markedly induced by nitrogen- and carbon-starvation, in particular by the former. These observations suggest that the 20S proteasome may be involved in remobilizing storage proteins, which then help to build the appressorium. Thus, fungal proteome analysis may provide important clues about developmental changes such as the generation of the appressorium.     

Anaerobic bio-hydrogen production from ethanol fermentation: the role of pH

Hydrogen was produced by an ethanol-acetate fermentation at pH of 5.0 +/- 0.2 and HRT of 3 days. The yield of hydrogen was 100-200 ml g Glu(-1) with a hydrogen content of 25-40%. This fluctuation in the hydrogen yield was attributed to the formation of propionate and the activity of hydrogen utilizing methanogens. The change in the operational pH for the inhibition of this methanogenic activity induced a change in the main fermentation pathway. In this study, the main products were butyrate, ethanol and propionate, in the pH ranges 4.0-4.5, 4.5-5.0 and 5.0-6.0, respectively. However, the activity of all the microorganisms was inhibited below pH 4.0. Therefore, pH 4.0 was regarded as the operational limit for the anaerobic bio-hydrogen production process. These results indicate that the pH plays an important role in determining the type of anaerobic fermentation pathway in anaerobic bio-hydrogen processes.