Characteristics of bovine early puerperal uterine contractility recorded under farm conditions

A non-invasive, digital technique was used to measure and quantify intrauterine pressure (IUP) changes in early postpartum dairy cows kept under farm conditions in order to document physiological changes in uterine contractility after uncomplicated calvings. In addition, possible relationships between characteristics of uterine contractility and blood ionized calcium (Ca(2+))-concentrations were investigated. Recordings of uterine contractility were made by using a transcervically inserted open tip catheter in 12 healthy cows during their first 48h after calving. The IUP recording technique appeared easily applicable under farm conditions. Although mean frequency (FREQ), amplitude (AMP) and area under the curve (AUC) of the myometrial contractions significantly decreased due to time, untreated early postpartum cows showed a high variability in characteristics of uterine contractility. There was no correlation between blood Ca2+ -concentrations and any of the contractility parameters.     

Management and sperm production of boars under differing environmental conditions

The management of boars to ensure good sperm production under differing environmental conditions is a major concern for pig keepers in both tropical countries and countries where there are extreme environmental changes. Such changes create stress in animals and influence the production of spermatozoa. High temperatures during hot summer months may result in lower feed consumption and create stresses that result in the inhibition of spermatogenesis. Although tropical countries do not have a problem with major variations in day length, this can cause problems such as decreased litter size and infertility in other regions of the world. Evaporative cooling systems built into boar accommodation are often used to reduce fluctuations in both temperature and humidity during the hot and humid months seen in tropical countries. The system has become popular in AI boar studs, where it is reported to reduce stress and improve feed consumption. Other management factors, such as housing comfort, social contact, mating conditions and the frequency of mating, are also very important boar management aids that assist good quality semen production; these will be covered briefly in this review. This review will consider primarily those management factors, for example, the management of temperature and humidity using evaporative cooling systems and other techniques that enable AI boar studs to maximize sperm fertility through adjustments to the environment.     

Cyclin D2 induces proliferation of cardiac myocytes and represses hypertrophy

The myocytes of the adult mammalian heart are considered unable to divide. Instead, mitogens induce cardiomyocyte hypertrophy. We have investigated the effect of adenoviral overexpression of cyclin D2 on myocyte proliferation and morphology. Cardiomyocytes in culture were identified by established markers. Cyclin D2 induced DNA synthesis and proliferation of cardiomyocytes and impaired hypertrophy induced by angiotensin II and serum. At the molecular level, cyclin D2 activated CDK4/6 and lead to pRB phosphorylation and downregulation of the cell cycle inhibitors p21Waf1/Cip1 and p27Kip1. Expression of the CDK4/6 inhibitor p16 inhibited proliferation and cyclin D2 overexpressing myocytes became hypertrophic under such conditions. Inhibition of hypertrophy by cyclin D2 correlated with downregulation of p27Kip1. These data show that hypertrophy and proliferation are highly related processes and suggest that cardiomyocyte hypertrophy is due to low amounts of cell cycle activators unable to overcome the block imposed by cell cycle inhibitors. Cell cycle entry upon hypertrophy may be converted to cell division by increased expression of activators such as cyclin D2.     

Expression profiling reveals differences in metabolic gene expression between exercise-induced cardiac effects and maladaptive cardiac hypertrophy

While cardiac hypertrophy elicited by pathological stimuli eventually leads to cardiac dysfunction, exercise-induced hypertrophy does not. This suggests that a beneficial hypertrophic phenotype exists. In search of an underlying molecular substrate we used microarray technology to identify cardiac gene expression in response to exercise. Rats exercised for seven weeks on a treadmill were characterized by invasive blood pressure measurements and echocardiography. RNA was isolated from the left ventricle and analysed on DNA microarrays containing 8740 genes. Selected genes were analysed by quantitative PCR. The exercise program resulted in cardiac hypertrophy without impaired cardiac function. Principal component analysis identified an exercise-induced change in gene expression that was distinct from the program observed in maladaptive hypertrophy. Statistical analysis identified 267 upregulated genes and 62 downregulated genes in response to exercise. Expression changes in genes encoding extracellular matrix proteins, cytoskeletal elements, signalling factors and ribosomal proteins mimicked changes previously described in maladaptive hypertrophy. Our most striking observation was that expression changes of genes involved in beta-oxidation of fatty acids and glucose metabolism differentiate adaptive from maladaptive hypertrophy. Direct comparison to maladaptive hypertrophy was enabled by quantitative PCR of key metabolic enzymes including uncoupling protein 2 (UCP2) and fatty acid translocase (CD36). DNA microarray analysis of gene expression changes in exercise-induced cardiac hypertrophy suggests that a set of genes involved in fatty acid and glucose metabolism could be fundamental to the beneficial phenotype of exercise-induced hypertrophy, as these changes are absent or reversed in maladaptive hypertrophy.     

Both hypersensitive and non-hypersensitive responses are associated with resistance in Salix viminalis against the gall midge Dasineura marginemtorquens

Hypersensitivity responses (HR) play a major role in plant resistance to pathogens. It is often claimed that HR is also important in plant resistance to insects, although there is little unambiguous documentation. Large genotypic variation in resistance against the gall midge Dasineura marginemtorquens is found in Salix viminalis. Variation in larval performance and induced responses within a full-sib S. viminalis family is reported here; 36 sibling plants were completely resistant (larvae died within 48 h after egg hatch, no gall induction), 11 plants were totally susceptible, 25 plants were variable (living and dead larvae present on the same plant). Resistance was associated with HR, but to different degrees; 21 totally resistant genotypes showed typical HR symptoms (many distinct necrotic spots) whereas the remaining 15 genotypes showed no, or very few, such symptoms. Hydrogen peroxide, used as a marker for HR, was induced in genotypes expressing HR symptoms but not in resistant genotypes without symptoms, or in susceptible genotypes. These data suggest that production of hydrogen peroxide, and accompanying cell death, cannot explain larval mortality in the symptomless reaction. Another, as yet unknown, mechanism of resistance may be present. If so, then it is possible that this unknown mechanism also contributes to resistance in plants displaying HR. The apparent complexity observed in this interaction, with both visible and invisible plant responses associated with resistance against an adapted insect species, may have implications for the study of resistance factors in other plant-insect interactions.     

Processing of pulmonary surfactant protein B by napsin and cathepsin H

Surfactant protein B (SP-B) is an essential constituent of pulmonary surfactant. SP-B is synthesized in alveolar type II cells as a preproprotein and processed to the mature peptide by the cleavage of NH2- and COOH-terminal peptides. An aspartyl protease has been suggested to cleave the NH2-terminal propeptide resulting in a 25-kDa intermediate. Napsin, an aspartyl protease expressed in alveolar type II cells, was detected in fetal lung homogenates as early as day 16 of gestation, 1 day before the onset of SP-B expression and processing. Napsin was localized to multivesicular bodies, the site of SP-B proprotein processing in type II cells. Incubation of SP-B proprotein from type II cells with a crude membrane extract from napsin-transfected cells resulted in enhanced levels of a 25-kDa intermediate. Purified napsin cleaved a recombinant SP-B/EGFP fusion protein within the NH2-terminal propeptide between Leu178 and Pro179, 22 amino acids upstream of the NH2 terminus of mature SP-B. Cathepsin H, a cysteine protease also implicated in pro-SP-B processing, cleaved SP-B/EGFP fusion protein 13 amino acids upstream of the NH2 terminus of mature SP-B. Napsin did not cleave the COOH-terminal peptide, whereas cathepsin H cleaved the boundary between mature SP-B and the COOH-terminal peptide and at several other sites within the COOH-terminal peptide. Knockdown of napsin by small interfering RNA resulted in decreased levels of mature SP-B and mature SP-C in type II cells. These results suggest that napsin, cathepsin H, and at least one other enzyme are involved in maturation of the biologically active SP-B peptide.     

Trabecular bone strains around a dental implant and associated micromotions—A micro-CT-based three-dimensional finite element study

The first objective of this computational study was to assess the strain magnitude and distribution within the three-dimensional (3D) trabecular bone structure around an osseointegrated dental implant loaded axially. The second objective was to investigate the relative micromotions between the implant and the surrounding bone. The work hypothesis adopted was that these virtual measurements would be a useful indicator of bone adaptation (resorption, homeostasis, formation).In order to reach these objectives, a μCT-based finite element model of an oral implant implanted into a Berkshire pig mandible was developed along with a robust software methodology. The finite element mesh of the 3D trabecular bone architecture was generated from the segmentation of μCT scans. The implant was meshed independently from its CAD file obtained from the manufacturer. The meshes of the implant and the bone sample were registered together in an integrated software environment. A series of non-linear contact finite element (FE) analyses considering an axial load applied to the top of the implant in combination with three sets of mechanical properties for the trabecular bone tissue was devised. Complex strain distribution patterns are reported and discussed. It was found that considering the Young’s modulus of the trabecular bone tissue to be 5, 10 and 15 GPa resulted in maximum peri-implant bone microstrains of about 3000, 2100 and 1400. These results indicate that, for the three sets of mechanical properties considered, the magnitude of maximum strain lies within an homeostatic range known to be sufficient to maintain/form bone. The corresponding micro-motions of the implant with respect to the bone microstructure were shown to be sufficiently low to prevent fibrous tissue formation and to favour long-term osseointegration.     

Process analytical technology (PAT) for biopharmaceutical products: Part II. Concepts and applications

Implementing real‐time product quality control meets one or both of the key goals outlined in FDA's PAT guidance: “variability is managed by the process” and “product quality attributes can be accurately and reliably predicted over the design space established for materials used, process parameters, manufacturing, environmental, and other conditions.” The first part of the paper presented an overview of PAT concepts and applications in the areas of upstream and downstream processing. In this second part, we present principles and case studies to illustrate implementation of PAT for drug product manufacturing, rapid microbiology, and chemometrics. We further present our thoughts on how PAT will be applied to biotech processes going forward. The role of PAT as an enabling component of the Quality by Design framework is highlighted. Integration of PAT with the principles stated in the ICH Q8, Q9, and Q10 guidance documents is also discussed. Biotechnol. Bioeng. 2010; 105: 285–295. Published 2009 Wiley Periodicals, Inc.     

Analysis of viral clearance unit operations for monoclonal antibodies

Demonstration of viral clearance is a critical step in assuring the safety of biotechnology products. We generated a viral clearance database that contains product information, unit operation process parameters, and viral clearance data from monoclonal antibody and antibody‐related regulatory submissions to FDA. Here we present a broad overview of the database and resulting analyses. We report that the diversity of model viruses tested expands as products transition to late‐phase. We also present averages and ranges of viral clearance results by Protein A and ion exchange chromatography steps, low pH chemical inactivation, and virus filtration, focusing on retro‐ and parvoviruses. For most unit operations, an average log reduction value (LRV, a measure of clearance power) for retrovirus of >4 log₁₀ were measured. Cases where clearance data fell outside of the anticipated range (i.e., outliers) were rationally explained. Lastly, a historical analysis did not find evidence of any improvement trend in viral clearance over time. The data collectively suggest that many unit operations in general can reliably clear viruses. Biotechnol. Bioeng. 2010;106: 238–246. Published 2010 Wiley Periodicals, Inc.