Effect of thyroid hormone on the distribution and activity of Na, K-ATPase in ventricular myocardium

Employing detergent-free sucrose-density gradient fractionation method we isolated cholesterol-rich lighter membrane fractions containing ∼10% of protein, ∼30% of cholesterol in membranes of ventricular myocardium. Cholesterol-rich lighter membrane fractions contain >70% of Na, K-ATPase and caveolins 1 and 3 and <10% of β-actin. Treatment of hypothyroid rats with T₃ increased the relative abundance of both α1 and β1 Na, K-ATPase subunits in total membranes by 4- to 5-fold (with no change in caveolin-3), and resulted in 1.9-fold increase in enzyme activity. T₃-induced Na, K-ATPase subunits were preferentially distributed to the lighter fractions (#s 4, 5 and 6); and increased abundance of α1 and β1 were 34-70% and 43-68%, respectively. We conclude that the activity of Na, K-ATPase is not uniform in cardiac membranes, and while a significant amount of Na, K-ATPase is present in cardiac cholesterol-rich membrane fractions, the intrinsic activity is significantly less than the enzyme present in relatively cholesterol-poor membranes.     

Deletional Protein Engineering Based on Stable Fold

Diversification of protein sequence-structure space is a major concern in protein engineering. Deletion mutagenesis can generate a protein sequence-structure space different from substitution mutagenesis mediated space, but it has not been widely used in protein engineering compared to substitution mutagenesis, because it causes a relatively huge range of structural perturbations of target proteins which often inactivates the proteins. In this study, we demonstrate that, using green fluorescent protein (GFP) as a model system, the drawback of the deletional protein engineering can be overcome by employing the protein structure with high stability. The systematic dissection of N-terminal, C-terminal and internal sequences of GFPs with two different stabilities showed that GFP with high stability (s-GFP), was more tolerant to the elimination of amino acids compared to a GFP with normal stability (n-GFP). The deletion studies of s-GFP enabled us to achieve three interesting variants viz. s-DL4, s-N14, and s-C225, which could not been obtained from n-GFP. The deletion of 191–196 loop sequences led to the variant s-DL4 that was expressed predominantly as insoluble form but mostly active. The s-N14 and s-C225 are the variants without the amino acid residues involving secondary structures around N- and C-terminals of GFP fold respectively, exhibiting comparable biophysical properties of the n-GFP. Structural analysis of the variants through computational modeling study gave a few structural insights that can explain the spectral properties of the variants. Our study suggests that the protein sequence-structure space of deletion mutants can be more efficiently explored by employing the protein structure with higher stability.     

Superior Appetite Hormone Profile After Equivalent Weight Loss by Gastric Bypass Compared to Gastric Banding

The goal of this study was to understand the mechanisms of greater weight loss by gastric bypass (GBP) compared to gastric banding (GB) surgery. Obese weight‐ and age‐matched subjects were studied before (T0), after a 12 kg weight loss (T1) by GBP (n = 11) or GB (n = 9), and at 1 year after surgery (T2). peptide YY_3–36 (PYY_3–36), ghrelin, glucagon‐like peptide‐1 (GLP‐1), leptin, and amylin were measured after an oral glucose challenge. At T1, glucose‐stimulated GLP‐1 and PYY levels increased significantly after GBP but not GB. Ghrelin levels did not change significantly after either surgery. In spite of equivalent weight loss, leptin and amylin decreased after GBP, but not after GB. At T2, weight loss was greater after GBP than GB (P = 0.003). GLP‐1, PYY, and amylin levels did not significantly change from T1 to T2; leptin levels continued to decrease after GBP, but not after GB at T2. Surprisingly, ghrelin area under the curve (AUC) increased 1 year after GBP (P = 0.03). These data show that, at equivalent weight loss, favorable GLP‐1 and PYY changes occur after GBP, but not GB, and could explain the difference in weight loss at 1 year. Mechanisms other than weight loss may explain changes of leptin and amylin after GBP.     

Isolation of microbes associated with field-collected populations of the egg parasitoid,Trichogramma chilonis capable of enhancing biotic fitness

Four bacterial and one yeast species, cultured and identified as Stenotrophomonas maltophilia, Acinetobacter sp., Pseudomonas sp. and Ochrobactrum sp. and the yeast as Metschnikowia reukaufii, were isolated from the internal organs of four collections of field-sourced egg parasitoid, Trichogramma chilonis, obtained as parasitised Helicoverpa armigera eggs. Bacteria were identified through 16 rRNA amplification and sequencing. The single species of yeast was identified through internal transcribed spacer sequences. A single bacterial species could be isolated from each of the four T. chilonis collections; however, all four T. chilonis collections yielded the yeast, M. reukaufii. In order to study the influence of the association of each of the bacterial species and the yeast, microbe-free laboratory-bred populations of T. chilonis were fed with the individual cultures and fitness parameters as parasitisation vigour and female bias were studied in T. chilonis over 10 generations. T. chilonis fed with either S. maltophilia or Acinetobacter sp. and Pseudomonas sp. showed a mean percent increase in female ratio of 26.2%, 30% and 30.3% and mean percent parasitisation of H. armigera eggs significantly increased by 38%, 32.2% and 31.3%, respectively. However, T. chilonis fed with Acinetobacter sp. did not positively influence the two T. chilonis fitness factors. The ubiquitous yeast, M. reukaufii, which could be isolated from all four collections of T. chilonis, could significantly increase both female count and percent parasitism ratio by 22% and 65%, respectively. This study has opened the possibility of modulating the parasitisation fitness of laboratory-bred T. chilonis, prior to field release, using microbes associated with them in the wild.     

Integration of deletion mutants of bovine rhodopsin into the membrane of the endoplasmic reticulum

Newly synthesized eukaryotic membrane proteins must be integrated into the membrane of the endoplasmic reticulum with the correct topology to enable the subsequent acquisition of the correctly folded, functional conformation. Here, an analysis is presented of N-terminal glycosylation and steady-state membrane orientation of a series of truncation mutants of the sevenhelix protein rhodopsin expressed in COS-1 cells. Mutants containing one, three, or five N-terminal transmembrane segments of rhodopsin, as well as mutants containing only the first transmembrane segment, but with hydrophilic extensions at the C-terminus were studied. The findings demonstrate that the C-terminal transmembrane segments play a crucial role in determining the final orientation of rhodopsin, and that the commitment to the correct orientation occurs only after the synthesis of at least three transmembrane segments. The experiments also suggest that the molecular machinery involved in the integration of a newly synthesized seven-helix membrane protein into the endoplasmic reticulum membrane is sensitive to the overall hydrophobicity of the sequence that follows the first transmembrane segment.     

Leveraging Distant Relatedness to Quantify Human Mutation and Gene-Conversion Rates

The rate at which human genomes mutate is a central biological parameter that has many implications for our ability to understand demographic and evolutionary phenomena. We present a method for inferring mutation and gene-conversion rates by using the number of sequence differences observed in identical-by-descent (IBD) segments together with a reconstructed model of recent population-size history. This approach is robust to, and can quantify, the presence of substantial genotyping error, as validated in coalescent simulations. We applied the method to 498 trio-phased sequenced Dutch individuals and inferred a point mutation rate of 1.66 × 10⁻⁸ per base per generation and a rate of 1.26 × 10⁻⁹ for <20 bp indels. By quantifying how estimates varied as a function of allele frequency, we inferred the probability that a site is involved in non-crossover gene conversion as 5.99 × 10⁻⁶. We found that recombination does not have observable mutagenic effects after gene conversion is accounted for and that local gene-conversion rates reflect recombination rates. We detected a strong enrichment of recent deleterious variation among mismatching variants found within IBD regions and observed summary statistics of local sharing of IBD segments to closely match previously proposed metrics of background selection; however, we found no significant effects of selection on our mutation-rate estimates. We detected no evidence of strong variation of mutation rates in a number of genomic annotations obtained from several recent studies. Our analysis suggests that a mutation-rate estimate higher than that reported by recent pedigree-based studies should be adopted in the context of DNA-based demographic reconstruction.     

Atomic Resolution Cryo-EM Structure of β-Galactosidase

1. Download high-res image (381KB)
2. Download full-size image

     

Morphing the feature-based multi-blocks of normative/healthy vertebral geometries to scoliosis vertebral geometries: development of personalized finite element models

Personalized Finite Element (FE) models and hexahedral elements are preferred for biomechanical investigations. Feature-based multi-block methods are used to develop anatomically accurate personalized FE models with hexahedral mesh. It is tedious to manually construct multi-blocks for large number of geometries on an individual basis to develop personalized FE models. Mesh-morphing method mitigates the aforementioned tediousness in meshing personalized geometries every time, but leads to element warping and loss of geometrical data. Such issues increase in magnitude when normative spine FE model is morphed to scoliosis-affected spinal geometry. The only way to bypass the issue of hex-mesh distortion or loss of geometry as a result of morphing is to rely on manually constructing the multi-blocks for scoliosis-affected spine geometry of each individual, which is time intensive. A method to semi-automate the construction of multi-blocks on the geometry of scoliosis vertebrae from the existing multi-blocks of normative vertebrae is demonstrated in this paper. High-quality hexahedral elements were generated on the scoliosis vertebrae from the morphed multi-blocks of normative vertebrae. Time taken was 3 months to construct the multi-blocks for normative spine and less than a day for scoliosis. Efforts taken to construct multi-blocks on personalized scoliosis spinal geometries are significantly reduced by morphing existing multi-blocks.