Effectiveness of noise barriers on an interstate highway: a subjective and objective evaluation

The objective of this study was to determine the actual and perceived effectiveness of noise barriers along interstate highways. Using a 5-mile section of Interstate 71 in the greater Cincinnati area as the study area, traffic noise readings and opinions of residents living along the sections of the highway were recorded. Noise readings were taken before and after the noise barriers were erected. A questionnaire was designed to elicit noise-related annoyance of the residents in the areas adjoining the highway. The results indicated that, in general, noise barriers were effective as indicated by a reduction in noise levels by as much as 11 dBA. The barriers, however, failed to bring noise levels for locations closer to the highway within the levels desired by the government (67 dBA). Most residents living right next to the highway were very satisfied with the installation of noise barriers. In general, these individuals felt that the quality of life improved with the noise barrier installation. The same, however, was not true of residents living a few blocks away from the highway--they felt the noise barriers were a waste of money. There was no significant difference in traffic noise pattern during the weekdays or weekends. Noise readings taken in two different locations were observed to be similar.     

Single disulfide and linear analogues corresponding to the carboxy-terminal segment of bovine beta-defensin-2: effects of introducing the beta-hairpin nucleating sequence d-pro-gly on antibacterial activity and Biophysical properties

Mammalian defensins (alpha as well as beta forms) have a beta-hairpin structural motif spanning approximately 20 residues at the carboxy-terminal end. We have investigated the antibacterial activity and biophysical properties of synthetic peptides corresponding to the carboxy-terminal segment of bovine beta-defensin-2 (BNBD-2): VRNHVTC(1)RINRGFC(2)VPIRC(3)PGRTRQIGTC(4)FGPRIKC(5)C(6)RSW (positions of disulfide bonds are C(1)[bond]C(5), C(2)[bond]C(4), and C(3)[bond]C(6)). The parent sequence chosen was RCPGRTRQIGTIFGPRIKCRSW (P1), which spans the carboxy-terminal region of BNBD-2. Since the dipeptide sequence D-Pro-Gly favors nucleation of beta-hairpin structures even in acyclic peptides, analogues of P1 with one D-Pro-Gly at the central portion and two D-Pro-Gly segments near the N- and C-terminal ends were generated. An analogue in which GP (residues 14 and 15) in P1 was switched to PG was also synthesized. It was observed that the cyclic form as well as their linear forms exhibited antibacterial activity. Circular dichroism and theoretical studies indicated that while the beta-hairpin conformation is populated, there is conformational plasticity in the cyclic and linear peptides. The mode of bacterial killing was by membrane permeabilization. The entire mammalian defensin sequence does not appear to be essential for manifestation of antibacterial activity. Hence, short peptides corresponding to the C-terminal segments of mammalian defensins could have potential as therapeutic agents.     

A fractal analysis of analyte-estrogen receptor binding and dissociation kinetics using biosensors: environmental and biomedical effects

A fractal analysis is used to model the binding and dissociation kinetics between analytes in solution and estrogen receptors (ERs) immobilized on a sensor chip of a surface plasmon resonance (SPR) biosensor. The influence of different ligands is also analyzed. A better understanding of the kinetics provides physical insights into the interactions, and suggests means by which appropriate interactions (to promote correct signaling) and inappropriate interactions such as with xenoestrogens (to minimize inappropriate and deleterious to health signaling) may be better controlled. The fractal approach is applied to analyte–ER interaction data available in the literature. The units for the different parameters (rate coefficients and affinities) in fractal-type kinetics are different from those obtained in classical kinetics. Numerical values obtained for the binding and the dissociation rate coefficients are linked to the degree of roughness or heterogeneity (fractal dimension, D_f) present on the biosensor chip surface. In general, the binding and the dissociation rate coefficients are very sensitive to the degree of heterogeneity on the surface. A single-fractal analysis is adequate in some cases. In others (that exhibit complexities in the binding or the dissociation curves) a dual-fractal analysis is required to obtain a better fit. This has biomedical and environmental implications in that the dissociation (and the binding) rate coefficient may be used to alleviate (deleterious effects) or enhance (beneficial effects) by selective modulation of the surface. The affinity values obtained in the analysis are consistent with the numbers required to (a) promote signaling between the correct analyte and the estrogen receptor, and (b) minimize the signaling between xenoestrogens and the estrogen receptor.     

A short review on the root canal configuration of primary maxillary molars

It is of interest to compile available information on the root canal morphology of primary maxillary molars from known literature. The literature resources used to collect data include Medline/PubMed, The Cochrane Central Register of Clinical Trials, SIGLE and Science Direct. Data consists of type of population, number of teeth per study, number of root canals, canal length and type of root canal configuration. We used data from a total of 13 studies (951 primary maxillary molars). Maxillary molars (1st and 2nd) are dominant for two roots variant. The first molar the mean root length ranges from 7.9mm - 8.1mm. The second molar ranges from 7.2mm-8.5mm. Type I (explain in a phrase) canal morphology is the common variant in both the molars. Data shows that Root Canal morphology shows variations with the diagnostic aid (example micro CT) used and in different ethnic populations.     

High throughput gene expression measurement with real time PCR in a microfluidic dynamic array

We describe a high throughput gene expression platform based on microfluidic dynamic arrays. This system allows 2,304 simultaneous real time PCR gene expression measurements in a single chip, while requiring less pipetting than is required to set up a 96 well plate. We show that one can measure the expression of 45 different genes in 18 tissues with replicates in a single chip. The data have excellent concordance with conventional real time PCR and the microfluidic dynamic arrays show better reproducibility than commercial DNA microarrays.     

Early Indicators of Fatal Leptospirosis during the 2010 Epidemic in Puerto Rico

Background

Leptospirosis is a potentially fatal bacterial zoonosis that is endemic throughout the tropics and may be misdiagnosed as dengue. Delayed hospital admission of leptospirosis patients is associated with increased mortality.

Methodology/Principal Findings

During a concurrent dengue/leptospirosis epidemic in Puerto Rico in 2010, suspected dengue patients that tested dengue-negative were tested for leptospirosis. Fatal and non-fatal hospitalized leptospirosis patients were matched 1:1–3 by age. Records from all medical visits were evaluated for factors associated with fatal outcome. Among 175 leptospirosis patients identified (4.7 per 100,000 residents), 26 (15%) were fatal. Most patients were older males and had illness onset during the rainy season. Fatal case patients first sought medical care earlier than non-fatal control patients (2.5 vs. 5 days post-illness onset [DPO], p < 0.01), but less frequently first sought care at a hospital (52.4% vs. 92.2%, p < 0.01). Although fatal cases were more often diagnosed with leptospirosis at first medical visit (43.9% vs. 9.6%, p = 0.01), they were admitted to the hospital no earlier than non-fatal controls (4.5 vs. 6 DPO, p = 0.31). Cases less often developed fever (p = 0.03), but more often developed jaundice, edema, leg pain, hemoptysis, and had a seizure (p ≤ 0.03). Multivariable analysis of laboratory values from first medical visit associated with fatal outcome included increased white blood cell (WBC) count with increased creatinine (p = 0.001), and decreased bicarbonate with either increased WBC count, increased creatinine, or decreased platelet count (p < 0.001).

Conclusions/Significance

Patients with fatal leptospirosis sought care earlier, but were not admitted for care any earlier than non-fatal patients. Combinations of routine laboratory values predictive of fatal outcome should be considered in admission decision-making for patients with suspected leptospirosis.     

Positions of proteins S6, S11 and S15 in the 30 S ribosomal subunit of Escherichia coli

A map of the positions of 12 of the 21 proteins of the 30 S ribosomal subunit of Escherichia coli (S1, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12 and S15), based on neutron scattering, is presented and discussed. Estimates for the radii of gyration of these proteins in situ are also obtained. It appears that many ribosomal proteins have compact configurations in the particle.     

An application of Berman's work on pool-model invariants in analyzing indistinguishable models for whole-body cholesterol metabolism

Berman and Schoenfeld used matrix transformations to study unidentifiable pool models. It is possible to use the method to examine if two models are output-indistinguishable, that is, if given the nature of tracer injections and observations, the two models have the same responses. The method is applied to two three-pool models for whole-body cholesterol metabolism. The indistinguishability of a mammillary model from a catenary model is proved using matrix transformations. The method is used in two ways, directly as well as after simplifying the problem. The two ways, as well as an analysis of the converse, help to show how the method is to be applied as well as the strengths and weaknesses of the method.