LIPID COMPOSITION OF CHLORARACHNIOPHYTES (CHLORARACHNIOPHYCEAE) FROM THE GENERA BIGELOWIELLA,GYMNOCHLORA, AND LOTHARELLA1

The Chlorarachniophyceae are unicellular eukaryotic algae characterized by an amoeboid morphology that may be the result of secondary endosymbiosis of a green alga by a nonphotosynthetic amoeba or amoeboflagellate. Whereas much is known about the phylogeny of chlorarachniophytes, little is known about their physiology, particularly that of their lipids. In an initial effort to characterize the lipids of this algal class, four organisms from three genera were examined for their fatty acid and sterol composition. Fatty acids from lipid fractions containing chloroplast‐associated glycolipids, storage triglycerides, and cytoplasmic membrane‐associated polar lipids were characterized. Glycolipid‐associated fatty acids were of limited composition, principally eicosapentaenoic acid [20:5(n‐3)] and hexadecanoic acid (16:0). Triglyceride‐associated fatty acids, although minor, were found to be similar in composition. The polar lipid fraction was dominated by lipids that did not contain phosphorus and had a more variable fatty acid composition with 16:0 and docosapentaenoic acid [22:5(n‐3)] dominant along with a number of minor C₁₈ and C₂₀ fatty acids. Crinosterol and one of the epimeric pair poriferasterol/stigmasterol were the sole sterols. Several genes required for synthesis of these sterols were computationally identified in Bigelowiella natans Moestrup. One sterol biosynthesis gene showed the greatest similarity to SMT1 of the green alga, Chlamydomonas reinhardtii. However, homologues to other species, mostly green plant species, were also found. Further, the method used for identification suggested that the sequences were transferred to a genetic compartment other than the likely original location, the nucleomorph nucleus.     

CELL DIVISION AND MORPHOGENESIS OF THE CENTRIC DIATOM CHAETOCEROS DECIPIENS (BACILLARIOPHYCEAE) II. ELECTRON MICROSCOPY AND A NEW PARADIGM FOR TIP GROWTH

Valve morphogenesis starts when the silica deposition vesicle (SDV) expands across a cleavage furrow covered by an unidentified layer, which may aid in its shaping. A labiate process (LP) is present only in the outer valve of terminal cells in the filament. Before these particular cells form setae, a layered "labiate process apparatus" (LPA) appears on the SDV in the exact center of the forming valve, near the microtubule center arising after cleavage. The LPA thereafter surmounts the lips of the LP as it forms. After the girdle bands separate slightly, two lateral protrusions develop in the corners of the cell. These nascent setae are lined internally by a cylindrical, fibrous band (sleeve), which assembles immediately ahead of the expanding edge of the SDV, very close to the plasmalemma. Then these protrusions, lined by the fibrous band, the SDV, and the forming silica wall, grow through two gaps in the girdle bands. The cytoplasm at the tip of the growing seta is naked. Immediately behind the tip, this fibrous band is adpressed to the plasmalemma and thereby apparently defines the diameter of the seta; it extends to internally ensheath the tipmost edge of the SDV for a short distance, like a tight-fitting inner sleeve. This structure is considered the major organelle involved in seta morphogenesis. Microtubules (MTs), while present, are variable in extent and disposition within the seta. Turgor pressure is considered irrelevant in driving seta growth. Instead, a new paradigm proposed for tip-growing cells generally, may apply to seta morphogenesis, as follows. If, as is suspected, the fibrous band contains actin, cycling of this actin (as in animal cells undergoing ruffling or filopodial extension) could drive seta extension via attachment of the band to the just-formed silica wall. The band is visualized as a molecular treadmill whose support base, the new wall, is being continually extended; extension is controlled and generated strictly at the tip.     

Nucleotide sequences at the sites of action of the deoxyribonucleic acid modification enzyme of bacteriophage P1

Labelled oligonucleotides have been fractionated from DNAase digests of phage λ DNA that had been methylated with the phage P1 modification enzyme and S-[methyl-¹⁴C]adenosyl-l-methionine. The longest sequences established are the tetranucleotides pG-ǎ?-T-C4 and p?-T-C-T, which, together with the other sequences determined, particularly pA-G-?, show that the modification enzyme, M.EcoP1, methylates adenine residues within defined sequences and suggest that the oligonucleotide sequence recognized by this enzyme is the hexanucleotide pA-G-A-T-C-T. The duplex formed by base-pairing this hexanucleotide with its complementary sequence resembles the recognition sequence for several restriction enzymes in being bisected by an axis of 2-fold rotational symmetry.     

Synthesis of deoxyribonucleic acid in BHK-21/C13 cells

Newly synthesized (3)H-labelled DNA was extracted from baby hamster kidney cells (BHK-21/C13 cells) and was shown to possess single-stranded properties when examined by column chromatography on benzoylated naphthoylated DEAE-cellulose, hydroxyapatite and methylated albumin on kieselguhr, and by its affinity for nitrocellulose filters. Some of the newly synthesized DNA was shown to be of lower molecular weight than the bulk of the DNA when examined by alkaline sucrose-density-gradient centrifugation. The properties observed were not affected by treatment of the DNA with ribonuclease, Pronase or amylase. The effect of the size of the DNA on its observed properties was examined and is discussed. It is concluded that DNA synthesis in BHK-21/C13 cells proceeds according to the discontinuous-mechanism model in at least one of the strands.     

General model of myosin filament structure. 3. Molecular packing arrangements in myosin filaments

Following the original proposals about myosin filament structure put forward as part of a general myosin filament model (Squire, 1971, 1972) it is here shown what the most likely molecular packing arrangements within the backbones of certain myosin filaments would be assuming that the model is correct. That this is so is already indicated by recently published experimental results which have confirmed several predictions of the model (Bullard and Reedy, 1972; Reedy et al., 1972; Tregear and Squire, 1973).The starting point in the analysis of the myosin packing arrangements is the model for the myosin ribbons in vertebrate smooth muscle proposed by Small &; Squire (1972). It is shown that there is only one reasonable type of packing arrangement for the rod portions of the myosin molecules which will account for the known structure of the ribbons and which is consistent with the known properties of myosin molecules. The dominant interactions in this packing scheme are between parallel myosin molecules which are related by axial shifts of 430 Å and 720 Å. In this analysis the myosin rods are treated as uniform rods of electron density and only the general features of two-strand coiled-coil molecules are considered.Since the general myosin filament model is based on the assumption that the structures of different types of myosin filament must be closely related, the packing scheme derived for the myosin ribbons is used to deduce the structures of the main parts (excluding the bare zones) of the myosin filaments in a variety of muscles. It is shown in each case that there is only one packing scheme consistent with all the available data on these filaments and that in each filament type exactly the same interactions between myosin rods are involved. In other words the myosin-myosin interactions involved in filament formation are specific, they involve molecular shifts of either 430 Å or 720 Å, and are virtually identical in all the different myosin filaments which have been considered. Apart from the myosin ribbons, these are the filaments in vertebrate skeletal muscle, insect flight muscle and certain molluscan muscles.In the case of the thick filaments in vertebrate skeletal muscle the form of the myosin packing arrangement in the bare zone is considered and a packing scheme proposed which involves antiparallel overlaps between myosin rods of 1300 Å and 430 Å. It is shown that this scheme readily explains the triangular profiles of the myosin filaments in the bare zone (Pepe, 1967, 1971) and many other observations on the form of these myosin filaments.Finally it is shown that the cores of several different myosin filaments, assuming they contain protein, may consist of different arrangements of one or other of two types of core subfilament.     

Myosin content and filament structure in smooth and striated muscle

Fibres from four different muscles (rabbit psoas, guinea pig taenia coli, Lethocerus flight and leg) were glycerol-extracted, homogenized and dissolved in a sodium dodecyl sulphate solution. The relative mass of the myosin heavy chain and actin polypeptides present in these extracts was measured by polyacrylamide gel electrophoresis. The ratio was found to be consistent for each muscle and to differ widely between muscles. The results were used to calculate the number of myosin molecules per subunit repeat along the thick filaments of the striated muscles and ribbon-like filaments, and so to test a theory of filament structure.     

Using unmanned aerial vehicle (UAV) surveys and image analysis in the study of large surface‐associated marine species: a case study on reef sharks Carcharhinus melanopterus shoaling behaviour

A novel image analysis‐based technique applied to unmanned aerial vehicle (UAV) survey data is described to detect and locate individual free‐ranging sharks within aggregations. The method allows rapid collection of data and quantification of fine‐scale swimming and collective patterns of sharks. We demonstrate the usefulness of this technique in a small‐scale case study exploring the shoaling tendencies of blacktip reef sharks Carcharhinus melanopterus in a large lagoon within Moorea, French Polynesia. Using our approach, we found that C. melanopterus displayed increased alignment with shoal companions when distributed over a sandflat where they are regularly fed for ecotourism purposes as compared with when they shoaled in a deeper adjacent channel. Our case study highlights the potential of a relatively low‐cost method that combines UAV survey data and image analysis to detect differences in shoaling patterns of free‐ranging sharks in shallow habitats. This approach offers an alternative to current techniques commonly used in controlled settings that require time‐consuming post‐processing effort.