Microbial decolourisation and degradation of textile dyes

Dyes and dyestuffs find use in a wide range of industries but are of primary importance to textile manufacturing. Wastewater from the textile industry can contain a variety of polluting substances including dyes. Increasingly, environmental legislation is being imposed to control the release of dyes, in particular azo-based compounds, into the environment. The ability of microorganisms to decolourise and metabolise dyes has long been known, and the use of bioremediation based technologies for treating textile wastewater has attracted interest. Within this review, we investigate the mechanisms by which diverse categories of microorganisms, such as the white-rot fungi and anaerobic bacterial consortia, bring about the degradation of dyestuffs.     

The LIM-only protein DRAL/FHL2 binds to the cytoplasmic domain of several alpha and beta integrin chains and is recruited to adhesion complexes

LIM proteins contain one or more double zinc finger structures (LIM domains) mediating specific contacts between proteins that participate in the formation of multiprotein complexes. We report that the LIM-only protein DRAL/FHL2, with four and a half LIM domains, can associate with alpha(3A), alpha(3B), alpha(7A), and several beta integrin subunits as shown in yeast two-hybrid assays as well as after overexpression in human cells. The amino acid sequence immediately following the conserved membrane-proximal region in the integrin alpha subunits or the C-terminal region with the conserved NXXY motif of the integrin beta subunits are critical for binding DRAL/FHL2. Furthermore, the DRAL/FHL2 associates with itself and with other molecules that bind to the cytoplasmic domain of integrin alpha subunits. Deletion analysis of DRAL/FHL2 revealed that particular LIM domains or LIM domain combinations bind the different proteins. These results, together with the fact that full-length DRAL/FHL2 is found in cell adhesion complexes, suggest that it is an adaptor/docking protein involved in integrin signaling pathways.     

Molecular population and virulence factor analysis of Staphylococcus aureus from bovine intramammary infection

Staphylococcus aureus isolates from cows in Ireland (n = 102) and the USA (n = 42) were characterized by RAPD-PCR and analysed for the production of a number of putative virulence factors. Of these strains 63 representative isolates were screened for the corresponding virulence factor genes by PCR or Southern hybridization or both. The isolates were divided into 12 distinct clonal types on the basis of their RAPD fingerprint profiles. Of the isolates, 107 (74.3%) tested positive for clumping factor in a slide agglutination test, all 24 RAPD type 7 isolates being negative for clumping factor. PCR analysis of region R, a repeat region of the clfA gene, revealed eight region-R sizes. There was a strong association between RAPD type and the clfA region-R genotype among Irish isolates. Of the RAPD type 7 isolates, 21 (87.5%) coproduced toxic shock syndrome toxin-1 (TSST-1) and staphylococcal enterotoxin C (SEC). Over 90% of isolates demonstrated haemolytic activity on sheep or rabbit red blood cells and all isolates harboured the gamma-haemolysin (hlg) locus. Of the Irish isolates, all those of RAPD type 7 were sensitive to penicillin G, whereas 86% of RAPD types 4 and 5 strains were resistant. Furthermore, RAPD types 5 and 7 were more likely to be associated with clinical mastitis whereas RAPD type 4 isolates were more often associated with a latent infection. The current study identifies some of the putative virulence factors produced by the predominant clonal types of bovine Staph. aureus that may be considered as components of a vaccine.     

Effect of patch size and plant density of Paterson"s curse (Echium plantagineum) on the oviposition of a specialist weevil, Mogulones larvatus

This study examines the oviposition response of a specialist weevil (Mogulones larvatus) to patches of its host, the noxious weed Paterson"s curse/salvation Jane (Echium plantagineum). We simultaneously examined the effect of patch size and plant density (and their interaction), on the recorded oviposition patterns. Our results show that oviposition first occurred on the largest patches with the highest number of plants. However, there was no significant effect of patch size or number of plants per patch at the end of the experiment. At this time the level of attack per plant was negatively correlated with plant density. This negative effect of density on the level of oviposition was not mediated by a reduction in plant size at higher densities. The pattern observed may indicate a risk-spreading strategy by females. Received: 15 July 1999 / Accepted: 14 April 2000     

Early Lineage Priming by Trisomy of Erg Leads to Myeloproliferation in a Down Syndrome Model

Down syndrome (DS), with trisomy of chromosome 21 (HSA21), is the commonest human aneuploidy. Pre-leukemic myeloproliferative changes in DS foetal livers precede the acquisition of GATA1 mutations, transient myeloproliferative disorder (DS-TMD) and acute megakaryocytic leukemia (DS-AMKL). Trisomy of the Erg gene is required for myeloproliferation in the Ts(17¹⁶)65Dn DS mouse model. We demonstrate here that genetic changes specifically attributable to trisomy of Erg lead to lineage priming of primitive and early multipotential progenitor cells in Ts(17¹⁶)65Dn mice, excess megakaryocyte-erythroid progenitors, and malignant myeloproliferation. Gene expression changes dependent on trisomy of Erg in Ts(17¹⁶)65Dn multilineage progenitor cells were correlated with those associated with trisomy of HSA21 in human DS hematopoietic stem and primitive progenitor cells. These data suggest a role for ERG as a regulator of hematopoietic lineage potential, and that trisomy of ERG in the context of DS foetal liver hemopoiesis drives the pre-leukemic changes that predispose to subsequent DS-TMD and DS-AMKL.     

Micronization of a Soft Material: Air-Jet and Micro-Ball Milling

The air-jet and ball-mill are frequently used in fine micronization of active pharmaceutical ingredients to the order of 1–5 μm, which is important for increasing dissolution rates, and also for pulmonary delivery. In this study, we investigated the ability of air-jet and ball-mill to achieve adequate micronization on the lab scale using a model soft material, Pluronic® F-68. Material mechanical properties were characterized using the nanometer 600. Pluronic® F-68 was ball-milled in a micro-mill at different material weights and durations in liquid nitrogen vapor. In comparison, a lab scale air-jet mill was used at various milling parameters according to a full factorial design, where the response factors were particle yield and particle size distribution, which was analyzed using laser diffraction and scanning electron microscopy. The yield achieved with the micro-ball mill was 100% but was ~80% for the air-jet mill, which reduced the size of Pluronic® F-68 from 70 μm to sizes ranging between 23–39 μm median diameters. Ball milling produced particles less than 10 μm after 15 min. Although air-jet milling proved capable of particle size reduction of the relatively soft material Pluronic® F-68, limitations to the lower size range achievable were observed. The feed rate of the material into the air jet mill was a significant factor and slower feed rates lead to smaller sizes by allowing more time for particle collisions and subsequent particle breakage to occur. Micro-ball milling under cold condition was more successful at achieving a lower range particle size reduction of soft materials.     

Binding of netrin-4 to laminin short arms regulates basement membrane assembly

Netrins were first identified as neural guidance molecules, acting through receptors that are members of the DCC and UNC-5 family. All netrins share structural homology to the laminin N-terminal domains and the laminin epidermal growth factor-like domains of laminin short arms. Laminins use these domains to self-assemble into complex networks. Here we demonstrate that netrin-4 is a component of basement membranes and is integrated into the laminin polymer via interactions with the laminin gamma1 andgamma3 short arms. The binding is mediated through the laminin N-terminal domain of netrin-4. In contrast to netrin-4, other members of the netrin family do not bind to these laminin short arms. Moreover, a truncated form of netrin-4 completely inhibits laminin-111 self-assembly in vitro, and full-length netrin-4 can partially disrupt laminin self-interactions. When added to explant cultures, netrin-4 retards salivary gland branching morphogenesis.