Improving of lipid productivity of the biodiesel promising green microalga <Emphasis Type="Italic">Chlorella pyrenoidosa</Emphasis> via low-energy ion implantation

High lipid content in microalgae is an essential parameter for adopting of microalgal biomass as a feedstock for biodiesel. Mutation is one approach to obtain desired algal strain with high lipid production. In this study, a mutant strain of Chlorella pyrenoidosa was isolated using 1.5?×?10¹⁵ ions cm^?2 s^?1 of N⁺ ion beam implantation technique, which has been widely used in mutagenesis of agricultural crops. N⁺ implantation slightly improved the growth of the mutant over the corresponding wild strain with significant increase in lipid content (32.4 % higher than the wild strain), which resulted in significant increase in lipid productivity by 35 %. In addition, ion implantation mutagenesis of C. pyrenoidosa resulted in 21.4 % decrease in total saturated fatty acids (SFAs) compared to the wild type, with a noticeable increase in polyunsaturated fatty acids (PUFAs). The increase in PUFAs was due mainly to stimulation of hexadecadienoic acid (C16:2) and octadecadienoic acid (C18:2) production. However, the SFA content of wild and mutant strains was 31.7 and 24.9 % of total fatty acids, respectively, highlighting the oxidative stability of biodiesel produced by both strains according to the European standards. Cultivation of C. pyrenoidosa mutant in selenite enrichment medium for five successive cultivation experiments showed insignificant changes in biomass productivity, lipid content, and lipid productivity alongside the study period, which confirms the genetic stability of the produced mutant. The present study confirmed the feasibility of generation of microalgae mutants with significant high lipid production using ion beam implantation.     

Influence of Nematode Parasitism,Body Size,Temperature, and Diel Period on the Flight Capacity of <Emphasis Type="Italic">Sirex noctilio</Emphasis> F. (Hymenoptera: Siricidae)

Sirex noctilio F. (Hymenoptera: Siricidae) is a woodwasp of pine trees that has recently invaded and established in North American forests. Although S. noctilio has had a limited impact in North America to date, there is some concern that it could have a significant impact on pine plantations, especially in the southeastern U.S.A. Moreover, there are few data on the flight capacity of male S. noctilio. We found no association between parasitism by D. siricidicola and whether or not S. noctilio initiated flight on the flight mill. Male wasps that were parasitized by nematodes were heavier than non-parasitized males, but there was no significant difference in mass between parasitized and non-parasitized females. We also examined the flight capacity of male and female S. noctilio in relation to nematode parasitism, body mass, temperature (for only males), and diel period. Body mass, temperature, and diel period affected flight in S. noctilio such that wasps were generally observed to fly faster, farther, and more frequently if they were heavier, flying at warmer temperatures, and flying during the photoperiod. The fact that nematode-parasitized male wasps were found to fly farther than the non-parasitized males is consistent with the hypothesis that nematode parasitism does not negatively affect the flight capacity of S. noctilio.     

Identifying <Emphasis Type="Italic">FATB1a</Emphasis> deletion that causes reduced palmitic acid content in soybean N87-2122-4 to develop a functional marker for marker-assisted selection

Palmitic acid is a major saturated fatty acid in soybean oil, and consumption of saturated fat is linked to a risk of coronary diseases. Development of soybean (Glycine max) cultivars with reduced palmitic acid content is an important goal of soybean breeding. The FATB1a gene was previously found to be responsible for reduced palmitic acid in the soybean line N87-2122-4. The objective of this research was to characterize the FATB1a gene identified in N87-2122-4 and develop a breeder-friendly, functional marker to facilitate marker-assisted selection and improve breeding efficiency for reduced palmitic soybeans. With the availability of soybean genetic maps, reference genome, and gene annotations, an approximate 254 kb deleted genomic region, including the FATB1a gene, was identified. Based on the gene deletion information, we developed a TaqMan marker and tested it with a segregating F ₂ population that consisted of 140 individual plants derived from ‘Cook’ × N87-2122-4. The marker performed well and accounted for 57 % of the phenotypic variation. The marker was also validated using a panel of 121 diverse soybean lines with known fatty acid profiles. The result indicated that the marker can be used effectively in marker-assisted breeding for reduced palmitic acid in soybean.     

Overexpression of <Emphasis Type="Italic">MuHSP70</Emphasis> gene from <Emphasis Type="Italic">Macrotyloma uniflorum</Emphasis> confers multiple abiotic stress tolerance in transgenic <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis>

A 70-KD heat shock protein (HSP70) is one of the most conserved chaperones. It is involved in de novo protein folding and prevents the aggregation of unfolded proteins under lethal environmental factors. The purpose of this study is to characterise a MuHSP70 from horsegram (Macrotyloma uniflorum) and elucidating its role in stress tolerance of plants. A MuHSP70 was cloned and characterised from a natural drought stress tolerant HPK4 variety of horsegram (M. uniflorum). For functional characterization, MuHSP70 was overexpressed in transgenic Arabidopsis. Overexpression of MuHSP70 was found to provide tolerance to the transgenic Arabidopsis against various stresses such as heat, cold, drought, salinity and oxidative stress. MuHSP70 transgenics were observed to maintain the shoot biomass, root length, relative water content, and chlorophyll content during exposure to multi-stresses relative to non-transgenic control. Transgenic lines have further shown the reduced levels of MDA, H₂O₂, and proteolytic activity. Together, these findings suggest that overexpression of MuHSP70 plays an important role in improving abiotic stress tolerance and could be a crucial candidate gene for exploration in crop improvement program.     

Genetics of frost hardiness in <Emphasis Type="Italic">Juglans regia</Emphasis> L. and relationship with growth and phenology

The growing interest in broadleaf timber plantations in the Mediterranean area has promoted several studies focusing on the identification and characterization of variability sources in main timber-producing species. J. regia is one of these species, well-adapted to this area, but with freezing, damages registrations. Breeding focused on productive traits should include knowledge of adaptation, required to obtain a good selection capable of producing a suitable turnover in timber plantations. In this study, the features evaluated were autumn and winter frost hardiness and some vegetative traits on 22 half-sib J. regia progenies. Budsticks were exposed to sub-zero temperatures in a controlled chamber and using measurements of relative electrolyte content, the LT50 values (°C) were calculated by each individual. The study was carried out on seven-year-old progenies. The familiar heritability of autumn frost hardiness was 0.68, and on winter, it was 0.77. The autumn frost behaviour correlated genetically with the length of the growing season (0.574 ± 0.351), and both autumn and winter frost hardiness correlated inversely with secondary annual growth measured at breast height (?0.654 ± 0.259 and ?0.740 ± 0.227, respectively). These results pointed that growth could therefore be improved without increasing the frost vulnerability. This should be important for growers, particularly under climate change conditions.     

Designing healthy,climate friendly and affordable school lunches

Purpose

This study aims to develop a model with which to build diets taking into account nutritional, climate change and economic aspects. A case study is used to test the proposed model, consisting of finding the optimal menus for school children in Spain from combinations of 20 starters, 20 main dishes and 7 desserts for a 20-day planning period.

Methods

An optimizing technique, specifically integer goal programming, is used as a means of designing diets which take into account the aforementioned aspects. Goal programming (GP) is used to design those menus that meet, or nearly meet, all the requirements with respect to caloric content, caloric share among macronutrients, nutrients to encourage and nutrients to limit, while reducing the carbon footprint (CFP) and the lunch budget. In order to have real, acceptable dishes, a school catering company provided information about the typical dishes they serve. The CFP of each dish was assessed, based on literature about life cycle assessment and CFP studies on food products. The nutritional value of each dish was obtained from databases, whereas prices were gathered from a wholesaler.

Results and discussion

After solving the goal programming model for several CFP and budget goals, the results show reductions with respect to the average CFP of between ?13 and ?24 %, and reductions with respect to the average budget between ?10 and ?15 % while maintaining the nutritional aspects similar to the average of the proposed menus. The results show that a wide range of budget is available, maintaining an almost constant CFP and meeting nutritional requirements to a similar degree; therefore, it is possible to avoid trade-offs between the CFP and the budget. The analysis of the dishes selected shows how the optimization model, in general, avoids the dishes which have a high CFP and high price and which are low in iron content, but high in protein and cholesterol.

Conclusions

Goal programming constitutes a suitable tool for designing diets which are economically, environmentally and nutritionally sustainable. Its flexibility enables specific issues to be studied, such as the existence of possible trade-offs between budget and CFP, attained by changing the budget and the CFP goals. By means of an iterative process, new dishes could be introduced or the existing ones could be improved, thus providing catering companies with useful information.

     

Magnetic-Based Fano Resonance by a Trimer with Y-shaped Gap

We introduce a Y-shaped gap into a silver disk to break the structure symmetry which can be looked as a loop-linked structure. Magnetic resonances are excited by incident light when incident electric field is parallel to the trimer plane. Fano resonance is generated by the coupling between bright electric mode and dark magnetic mode. These resonances can be adjusted by tuning the gap size, the radius of trimer, and the position of Y-shaped gap. The extinction cross section of the structure is calculated with the finite element method (FEM). The maximum figure of merit (FOM) is 37.8. Both the magnetic and electric field are greatly enhanced at the Fano dip and the magnetic resonance peak.