Stilbene Glycoside Oligomers from the Roots of Polygonum multiflorum

Five new trans‐2,3,5,4′‐tetrahydroxystilbene 2‐O‐β‐d ‐glucopyranoside (TSG)‐based stilbene glycoside oligomers ( 1 – 5 ) were isolated from the roots of Polygonum multiflorum. Their structures were elucidated by comprehensive spectroscopic analyses and chemical evidences. The absolute configurations of 1 , 2 , 4 , and 5 were established by quantum‐chemical electronic circular dichroism (ECD) calculations. Putative biosynthetic pathways of 1–5 were proposed using TSG as the key precursor. In addition, compounds 1 (multiflorumiside H) and 3 (multiflorumiside J) exhibited moderate inhibitory activities against NO production in LPS‐stimulated RAW264.7 cells.     

Design,Synthesis and in Vitro Tumor Cytotoxicity Evaluation of 3,5‐Diamino‐N‐substituted Benzamide Derivatives as Novel GSK‐3β Small Molecule Inhibitors

Glycogen synthase kinase‐3 (GSK‐3) plays an important regulatory role in various signaling pathways; such as PI3 K/AKT, which is closely related to the occurrence and development of tumors. At present, the most reported active GSK‐3 inhibitors have the same structure: lactam ring or amide structure. To find out the GSK‐3β small molecule inhibitor with novel, safe, efficient and more uncomplicated synthesis method, we analyzed in‐depth reported crystal‐binding patterns of GSK‐3β small molecule inhibitor with GSK‐3β protein, and designed and synthesized 17 non‐reported 3,5‐diamino‐N‐substituted benzamide compounds. Their structures were confirmed by ¹H‐NMR, ¹³C‐NMR, and HR‐MS. The preliminary screening of tumor cytotoxicity of compounds in vitro was detected by MTT, and their structure–activity relationships were illustrated. The results have shown that 3,5‐diamino‐N‐[3‐(trifluoromethyl)phenyl]benzamide ( 4d ) exhibited significant tumor cytotoxicity against human colon cancer cells (HCT‐116) with IC₅₀ of 8.3 μm and showed commendable selectivity to GSK‐3β. In addition, Compound 4d induced apoptosis to some extent and possessed modest PK properties.     

Pristimerin Induces Autophagy‐Mediated Cell Death in K562 Cells through the ROS/JNK Signaling Pathway

Chronic myeloid leukemia (CML) is a lethal malignancy, and the progress toward long‐term survival has stagnated in recent decades. Pristimerin, a quinone methide triterpenoid isolated from the Celastraceae and Hippocrateaceae families, is well‐known to exert potential anticancer activities. In this study, we investigated the effects and the mechanisms of action on CML. We found that pristimerin inhibited cell proliferation of K562 CML cells by causing G1 phase arrest. Furthermore, we demonstrated that pristimerin triggered autophagy and apoptosis. Intriguingly, pristimerin‐induced cell death was restored by an autophagy inhibitor, suggesting that autophagy is cross‐linked with pristimerin‐induced apoptosis. Further studies revealed that pristimerin could produce excessive reactive oxygen species (ROS), which then induce JNK activation. These findings provide clear evidence that pristimerin might be clinical benefit to patients with CML.     

A High‐Performance Monolithic Solid‐State Sodium Battery with Ca2+ Doped Na3Zr2Si2PO12 Electrolyte

Solid‐state sodium batteries (SSSBs) are promising electrochemical energy storage devices due to their high energy density, high safety, and abundant resource of sodium. However, low conductivity of solid electrolyte as well as high interfacial resistance between electrolyte and electrodes are two main challenges for practical application. To address these issues, pure phase Na₃Zr₂Si₂PO₁₂ (NZSP) materials with Ca²⁺ substitution for Zr⁴⁺ are synthesized by a sol‐gel method. It shows a high ionic conductivity of more than 10^?3 S cm^?1 at 25 °C. Moreover, a robust SSSB is developed by integrating sodium metal anodes into NZSP‐type monolithic architecture, forming a 3D electronic and ionic conducting network. The interfacial resistance is remarkably reduced and the monolithic symmetric cell displays stable sodium platting/striping cycles with low polarization for over 600 h. Furthermore, by combining sodium metal anode with Na₃V₂(PO₄)₃ cathode, an SSSB is demonstrated with high rate capability and excellent cyclability. After 450 cycles, the capacity of the cell is still kept at 94.9 mAh g^?1 at 1 C. This unique design of monolithic electrolyte architecture provides a promising strategy toward realizing high‐performance SSSBs.     

Suppressing Lithium Dendrite Growth via Sinusoidal Ripple Current Produced by Triboelectric Nanogenerators

Lithium metal as an ultimate anode material of future rechargeable batteries may furnish the highest energy density for its pairing cathode, although preventing the growth of lithium dendrites in liquid electrolytes is a major challenge. This work reports that stable lithium metal anodes can be achieved by charging with high‐frequency sinusoidal ripple current generated by rotating triboelectric nanogenerators (R‐TENGs). Compared with constant DC current charging, sinusoidal ripple current charging by R‐TENG improves the uniformity of lithium deposition during cycling test. Consequently, symmetric Li/Li cells exhibit lower overpotential and better cycling stability. In addition, full cells assembled with lithium metal anodes and LiFePO₄ cathodes show considerably improved capacity retention when charged by R‐TENG's sinusoidal ripple current (99.5%) compared to constant current (78.7%) after 200 cycles. The charging strategy device in this work provides a promising direction toward improving the cycle life of Li metal batteries. In addition, the combination of R‐TENGs with Li metal batteries offers an encouraging solution for achieving stable energy supply in self‐powered systems.     

Bringing Conducting Polymers to High Order: Toward Conductivities beyond 105 S cm−1 and Thermoelectric Power Factors of 2 mW m−1 K−2

Here, an effective design strategy of polymer thermoelectric materials based on structural control in doped polymer semiconductors is presented. The strategy is illustrated for two archetypical polythiophenes, e.g., poly(2,5‐bis(3‐dodecyl‐2‐thienyl)thieno[3,2‐b]thiophene) (C₁₂‐PBTTT) and regioregular poly(3‐hexylthiophene) (P3HT). FeCl₃ doping of aligned films results in charge conductivities up to 2 × 10⁵ S cm^?1 and metallic‐like thermopowers similar to iodine‐doped polyacetylene. The films are almost optically transparent and show strongly polarized near‐infrared polaronic bands (dichroic ratio >10). The comparative study of structure–property correlations in P3HT and C₁₂‐PBTTT identifies three conditions to obtain conductivities beyond 10⁵ S cm^?1: i) achieve high in‐plane orientation of conjugated polymers with high persistence length; ii) ensure uniform chain oxidation of the polymer backbones by regular intercalation of dopant molecules in the polymer structure without disrupting alignment of π‐stacked layers; and iii) maintain a percolating nanomorphology along the chain direction. The highly anisotropic conducting polymer films are ideal model systems to investigate the correlations between thermopower S and charge conductivity σ. A scaling law S ∝ σ^?1/4 prevails along the chain direction, but a different S ∝ ?ln(σ) relation is observed perpendicular to the chains, suggesting different charge transport mechanisms. The simultaneous increase of charge conductivity and thermopower along the chain direction results in a substantial improvement of thermoelectric power factors up to 2 mW m^?1 K^?2 in C₁₂‐PBTTT.     

Boost the Performance of Triboelectric Nanogenerators through Circuit Oscillation

Triboelectric nanogenerator (TENG) which harvests ubiquitous ambient mechanical energy is a promising power source that can meet the distributed energy demand in the internet of things, wearable electronics, etc. However, the available output of TENG is severely limited by the saturated polarized charge density, small intrinsic capacitance, and large matching impedance. Herein, an effective power management strategy is proposed that flips the free charges on the conductive layer through a controlled LC oscillating circuit composed of the diode, switch, inductor, and the intrinsic capacitor of TENG. In this way, the equivalent charge density reaches a level higher than the saturated polarized charge density. The simulation and experiments show that the limit of energy output can be exceeded under arbitrary load resistance, especially for the low‐impedance common electronics. It is believed that such a general, low‐cost, and highly effective strategy can further broaden the applications of TENG devices across the fields and probably be a new performance evaluation standard for TENG.     

A behavioral paradigm to study the persistence of reward memory extinction in Drosophila

<正>Drosophila has been proven to be a powerful animal model to study genetic mechanisms underlying different behaviors and diseases (Sokolowski,2001;Bier,2005).Extinction is a process that repeated presentation of a conditioned stimulus without reinforcement results in decreased conditioned responses (Bouton,2004) and receives increasing attention for treating its related diseases such as post-traumatic stress disorder (PTSD) and addiction     

The structure and luminescence properties of Mn2+/Eu2+/Er3+‐doped MgO‐Ga2O3‐SiO2 glasses and glass‐ceramics

The MgO–Ga₂O₃–SiO₂ glasses and glass‐ceramics samples doped with Eu²⁺/Mn²⁺/Er³⁺ and heated in reductive atmosphere were prepared by the sol–gel method. The structure, morphology and the luminescence properties were studied using X‐ray diffraction, high‐resolution transmission electron microscope, fluorescence spectra, and up‐conversion emission. The luminescence characteristics of doped ions could be influenced by temperature and matrix component. The characteristic emission of Mn²⁺, Eu²⁺ and Er³⁺ were seen and the energy transfer efficiency from Eu²⁺ to Mn²⁺ was enhanced as Mn²⁺ concentration was increased. In addition, the two‐photon process was determined for the Er³⁺‐doped samples.