Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Transmission electron microscopic studies on the mitotic cycle of nucleolar proteins impregnated with silver

Hela cells were impregnated with silver according to Paweletz et al. (1967). In cells in mitosis not only the nucleolar organizer regions (NORs) are strongly impregnated but also part of the nucleolar material, which accumulates in and around the chromosomes. The treatment with adenosine, which in interphase cells spreads the nucleolar material within the nucleus, also distributes the argentophilic material in and around the chromosomes. During the reconstruction phase this material reassembles around the NORs to form parts of the new nucleolus. The silver impregnation technique clearly demonstrates that two main components are responsible for the argentophily of the nucleolus. This is in agreement with the results obtained by Lischwe et al. (1979).     

Familial breast/ovarian cancer and BRCA1/2 genetic screening: the role of immunohistochemistry as an additional method in the selection of patients.

Only 20-25% of families screened for BRCA1/2 mutations are found positive. Because only a positive result is informative, we studied the role of BRCA1/2 immunohistochemistry as an additional method for patient selection. From 53 high-risk-affected probands, 18 (34%) had available paraffin blocks of their tumors and were selected for this study. Mutation screening was done by conformation-sensitive gel electrophoresis and multiplex ligation-dependent probe amplification. For immunohistochemistry, 21 neoplastic specimens (15 breast carcinomas, 5 ovary neoplasms, and 1 rectal adenocarcinoma) were analyzed with BRCA1 (monoclonal antibody, Ab-1, oncogene) and BRCA2 (polyclonal antibody, Ab-2, oncogene) antibodies. Absence of the BRCA1 protein was confirmed in negative tumors by Western blotting. Seven patients were positive for BRCA1/2 mutations: 5 for BRCA1 and 2 for BRCA2. Four out of five positive patients had tumors negative for BRCA1 immunostaining, and the remaining 13 BRCA1-negative patients had positive BRCA1 immunostaining in all tumor samples. Sensitivity to predict for BRCA1 mutation carriers was 80%, and specificity was 100%, with a positive predictive value of 100% and a negative predictive value of 93%. This correlation was statistically significant (p=0.001). No correlation was observed for BRCA2. If larger studies confirm these results, high-risk patients with BRCA1-negative tumors should be screened first for this gene.     

Enhancement of metabolic rates of yeast flocculent cells through the use of polymeric additives

The influence of several polymeric additives on specific glucose uptake rate of flocs of a S. cerevisiae strain — S. cerevisiae NRRLY 265 was studied. A special continuous membrane microreactor was used to measure glucose uptake on the presence of calcium and of the tested additives — two cationic polymers — bis(polyoxyethylene-bis(amine)) 20,000 and BPA 1,000 and one anionic polymer — Magna Floc LT25.An increase on glucose uptake rate was always observed when comparing with calcium bound flocs. For bis(polyoxyethylene-bis(amine)) 20,000 the increase was only 19% but for BPA 1,000 a value of more than 50% was observed. For Magna Floc LT25 a two fold increase was measured.The determination of floc size and porosity in the presence of the additives indicated that, on the basis of these parameters, it was not possible to explain the observed glucose uptake rates. The floc porosites in additive bound flocs were similar and 10% larger than for calcium bound flocs and glucose uptake rate was larger for the largest flocs — Magna Floc LT25 bound flocs were the largest followed by BPA 1,000, bis(polyoxyethylene-bis(amine)) 20,000 and calcium bound flocs. These values disagree with what should be expected in diffusion controlled processes.The calculation of intercellular floc distance indicated that polymeric additives act on the reduction of diffusional limitations by increasing the available flux area for glucose inside the flocs. By analysing different kinds of packings, it was also observed that the packing arrangement for yeast cells in flocs is close to the cubic packing. The simulation of this arrangement for the obtained floc sizes confirmed that the 10% increase in floc porosity is sufficient to explain the increase in the available flux area.     

On the anatomical definition of arterial networks in blood flow simulations: comparison of detailed and simplified models

Biomechanics and Modeling in Mechanobiology - The goal of this work is to assess the impact of vascular anatomy definition degree in the predictions of blood flow models of the arterial network. To...     

Towards the mechanism and comparative effect of diphenyl diselenide, diphenyl ditelluride and ebselen under various pathophysiological conditions in rat's kidney preparation

As an extension of our previous work we not only evaluated the relationship between acidosis and lipid peroxidation in rat's kidney homogenate, but also determined for the first time the potential anti-oxidant activity of diphenyl diselenide, diphenyl ditelluride and ebselen at a range of pH values (7.4–5.4). Because of the pH dependency of iron redox cycling, pH and iron need to be well controlled and for the reason we tested a number of pH values (from 7.4 to 5.4) to get a closer idea about the role of iron under various pathological conditions. Acidosis increased rate of lipid peroxidation in the absence Fe (II) in kidney homogenates especially at pH 5.4. This higher extent of lipid peroxidation can be explained by; the mobilized iron which may come from reserves where it is weakly bound. Addition of iron (Fe) chelator desferoxamine (DFO) to reaction medium completely inhibited the peroxidation processes at all studied pH values including acidic values (5.8–5.4). In the presence of Fe (II) acidosis also enhanced detrimental effect of Fe (II) especially at pH (6.4–5.4). Diphenyl diselenide significantly protected lipid peroxidation at all studied pH values, while ebselen offered only a small statistically non-significant protection. The highest anti-oxidant potency was observed for diphenyl ditelluride. These differences in potencies were explained by the mode of action of these compounds using their catalytic anti-oxidant cycles. However, changing the pH of the reaction medium did not alter the anti-oxidant activity of the tested compounds. This study provides evidence for acidosis catalyzed oxidative stress in kidney homogenate and for the first time anti-oxidant potential of diphenyl diselenide and diphenyl ditelluride not only at physiological pH but also at a range of acidic values.     

Chromosome characterization in Acestrorhynchinae and Cynopotaminae (Pisces, Characidae)

The karyotypes of six species of Acestrorhynchinae ( Acestrorhynchus alus, A. lacustris, Oligosarcus hepsetus, O. jenynsii, O. macrolepis and O. pinloi ) and of one species of Cynopotaminae ( Galeocharax knerii ) were studied. The six Acestrorhynchinae species have 2 n = 50, while Galeocharax knerii has 2 n = 52 chromosomes. Some chromosomal characteristics were detected which permit establishing some karyotypic relationships among the different species investigated. Thus, among the Acestrorhynchinae, the four Oligosarcus species are relatively more related to one another than the two Acestrorhynchus species, at least with respect to the cytogenetic data considered. On the basis of the methods used, no sex chromosome heteromorphism was detected in the species for which a comparative study between male and female specimens was possible.     

A split-pot experiment with sorghum to test a root water uptake partitioning model

Correct modeling of root water uptake partitioning over depth is an important issue in hydrological and crop growth models. Recently a physically based model to describe root water uptake was developed at single root scale and upscaled to the root system scale considering a homogeneous distribution of roots per soil layer. Root water uptake partitioning is calculated over soil layers or compartments as a function of respective soil hydraulic conditions, specifically the soil matric flux potential, root characteristics and a root system efficiency factor to compensate for within-layer root system heterogeneities. The performance of this model was tested in an experiment performed in two-compartment split-pot lysimeters with sorghum plants. The compartments were submitted to different irrigation cycles resulting in contrasting water contents over time. The root system efficiency factor was determined to be about 0.05. Release of water from roots to soil was predicted and observed on several occasions during the experiment; however, model predictions suggested root water release to occur more often and at a higher rate than observed. This may be due to not considering internal root system resistances, thus overestimating the ease with which roots can act as conductors of water. Excluding these erroneous predictions from the dataset, statistical indices show model performance to be of good quality.