Using the Hard, Randy, and Rittler Test to Evaluate Color Vision in Capuchins (Cebus libidinosus)

The identification of color vision types in primates is fundamental to understanding the evolution and biological function of color perception. The Hard, Randy, and Rittler (HRR) pseudoisochromatic test categorizes human color vision types successfully. Here we provide an experimental setup to employ HRR in a nonhuman primate, the capuchin (Cebus libidinosus), a platyrrhine with polymorphic color vision. The HRR test consists of plates with a matrix composed of gray circles that vary in size and brightness. Differently colored circles form a geometric shape (X, O, or Δ) that is discriminated visually from the gray background pattern. The ability to identify these shapes determines the type of dyschromatopsy (deficiency in color vision). We tested six capuchins in their own cages under natural sunlight. The subjects chose between two HRR plates in each trial: one with the gray pattern only and the other with a colored shape, presented on the left or right side at random. We presented the test 40 times and calculated the 95?% confidence limits for chance performance based on the binomial test. We also genotyped all subjects for exons 3 and 5 of the X-linked opsin genes. The HRR test diagnosed two subjects as protan dichromats (missing or defective L-cone), three as deutan dichromats (missing or defective M-cone), and one female as trichromat. Genetic analysis supported the behavioral data for all subjects. These findings show that the HRR test can be applied to diagnose color vision in nonhuman primates.     

Mosaiktrisomie 8p11.21q11.21 als Pr?disposition für myeloische Leuk?mien

Juvenile myelomonocytic leukemia (JMML) is a unique myeloproliferative disorder of early childhood in which mutations in NRAS, KRAS, PTPN11, NF1 and CBL are frequently found. Using high-resolution oligo array-based comparative genomic hybridization (aCGH), 20 JMML samples were investigated for submicroscopic genomic copy number alterations. Besides known cytogenetic aberrations, ten samples displayed additional submicroscopic alterations. Interestingly, an almost identical gain of chromosome 8 was identified in two patients. Subsequently, fluorescence in situ hybridization indicated a constitutional partial trisomy 8 mosaic (cT8M) in both patients. A survey on 27 cT8M patients with reported malignancies showed a predominance of myeloid malignancies including JMML. Our results dramatically reduce the critical region on chromosome 8 to 8p11.21q11.21. To determine how constitutional partial trisomy 8 mosaicisms may contribute to leukemogenesis in different mutational subtypes of JMML and other myeloid malignancies, further investigations are required.     

Maßgeschneiderte Mikroorganismen

Tailor‐made microorganisms Microbial diversity provides unlimited resources for the development of novel industrial processes and products. Since the beginning of the 20th century microorganisms have been successfully applied for the large scale production of bio‐based products. In recent years, modern methods of strain development and Synthetic Biology have enabled biotech engineers to design even more sophisticated and tailor‐made microorganisms. These microbes serve industrial processes for the production of bulk chemicals, enzymes, polymers, biofuels as well as plant‐derived ingredients such as Artemisinin in an ecologically and economically sustainable and attractive fashion. In the future, production of advanced biofuels, microbial fuel cells, CO₂ as feedstock and microbial cellulose are research topics as well as challenges of global importance. Continuous efforts in microbiology and biotechnology research will be pivotal for white biotechnology to gain more momentum in transforming the chemical industry towards a knowledge based bio‐economy.     

Saliva samples are a viable alternative to blood samples as a source of DNA for high throughput genotyping

ABSTRACT: BACKGROUND: The increasing trend for incorporation of biological sample collection within clinical trials requires sample collection procedures which are convenient and acceptable for both patients and clinicians. This study investigated the feasibility of using saliva-extracted DNA in comparison to blood-derived DNA, across two genotyping platforms: Applied Biosystems Taqman TM and Illumina Beadchip TM genome-wide arrays. METHOD: Patients were recruited from the Pharmacogenetics of Breast Cancer Chemotherapy (PGSNPS) study. Paired blood and saliva samples were collected from 79 study participants. The Oragene DNA Self-Collection kit (DNAgenotek(R)) was used to collect and extract DNA from saliva. DNA from EDTA blood samples (median volume 8 ml) was extracted by GenProbe, Livingstone, UK. DNA yields, standard measures of DNA quality, genotype call rates and genotype concordance between paired, duplicated samples were assessed. RESULTS: Total DNA yields were lower from saliva (mean 24 ug, range 0.2-52 ug) than from blood (mean 210 ug, range 58-577 ug) and a 2-fold difference remained after adjusting for the volume of biological material collected. Protein contamination and DNA fragmentation measures were greater in saliva DNA. 78/79 saliva samples yielded sufficient DNA for use on Illumina Beadchip arrays and using Taqman assays. Four samples were randomly selected for genotyping in duplicate on the Illumina Beadchip arrays. All samples were genotyped using Taqman assays. DNA quality, as assessed by genotype call rates and genotype concordance between matched pairs of DNA was high (>97%) for each measure in both blood and saliva-derived DNA. CONCLUSION: We conclude that DNA from saliva and blood samples is comparable when genotyping using either Taqman assays or genome-wide chip arrays. Saliva sampling has the potential to increase participant recruitment within clinical trials, as well as reducing the resources and organisation required for multicentre sample collection.     

Microbial and chemical characterization of underwater fresh water springs in the Dead Sea

Due to its extreme salinity and high Mg concentration the Dead Sea is characterized by a very low density of cells most of which are Archaea. We discovered several underwater fresh to brackish water springs in the Dead Sea harboring dense microbial communities. We provide the first characterization of these communities, discuss their possible origin, hydrochemical environment, energetic resources and the putative biogeochemical pathways they are mediating. Pyrosequencing of the 16S rRNA gene and community fingerprinting methods showed that the spring community originates from the Dead Sea sediments and not from the aquifer. Furthermore, it suggested that there is a dense Archaeal community in the shoreline pore water of the lake. Sequences of bacterial sulfate reducers, nitrifiers iron oxidizers and iron reducers were identified as well. Analysis of white and green biofilms suggested that sulfide oxidation through chemolitotrophy and phototrophy is highly significant. Hyperspectral analysis showed a tight association between abundant green sulfur bacteria and cyanobacteria in the green biofilms. Together, our findings show that the Dead Sea floor harbors diverse microbial communities, part of which is not known from other hypersaline environments. Analysis of the water's chemistry shows evidence of microbial activity along the path and suggests that the springs supply nitrogen, phosphorus and organic matter to the microbial communities in the Dead Sea. The underwater springs are a newly recognized water source for the Dead Sea. Their input of microorganisms and nutrients needs to be considered in the assessment of possible impact of dilution events of the lake surface waters, such as those that will occur in the future due to the intended establishment of the Red Sea-Dead Sea water conduit.     

Differentiation and visualization of diverse cellular phenotypic responses in primary high-content screening

High-throughput screening, based on subcellular imaging, has become a powerful tool in lead discovery. Through the generation of high-quality images, not only the specific target signal can be analyzed but also phenotypic changes of the whole cell are recorded. Yet analysis strategies for the exploration of high-content screening results, in a manner that is independent from predefined control phenotypes, are largely missing. The approach presented here is based on a well-established modeling technique, self-organizing maps (SOMs), which uses multiparametric results to group treatments that create similar morphological effects. This report describes a novel visualization of the SOM clustering by using an image of the cells from each node, with the most representative cell highlighted to deploy the phenotype described by each node. The approach has the potential to identify both expected hits and novel cellular phenotypes. Moreover, different chemotypes, which cause the same phenotypic effects, are identified, thus facilitating "scaffold hopping."     

Structures of lysenin reveal a shared evolutionary origin for pore-forming proteins and its mode of sphingomyelin recognition

Pore-forming proteins insert from solution into membranes to create lesions, undergoing a structural rearrangement often accompanied by oligomerization. Lysenin, a pore-forming toxin from the earthworm Eisenia fetida, specifically interacts with sphingomyelin (SM) and may confer innate immunity against parasites by attacking their membranes to form pores. SM has important roles in cell membranes and lysenin is a popular SM-labeling reagent. The structure of lysenin suggests common ancestry with other pore-forming proteins from a diverse set of eukaryotes and prokaryotes. The complex with SM shows the mode of its recognition by a protein in which both the phosphocholine headgroup and one acyl tail are specifically bound. Lipid interaction studies and assays using viable target cells confirm the functional reliance of lysenin on this form of SM recognition.     

FTIR study of the photoinduced processes of plant phytochrome phyA using isotope-labeled bilins and density functional theory calculations

Fourier transform infrared spectroscopy was used to analyze the chromophore structure in the parent states Pr and Pfr of plant phytochrome phyA and the respective photoproducts lumi-R and lumi-F. The spectra were obtained from phyA adducts assembled with either uniformly or selectively isotope-labeled phytochromobilin and phycocyanobilin. The interpretation of the experimental spectra is based on the spectra of chromophore models calculated by density functional theory. Global ¹³C-labeling of the tetrapyrrole allows for the discrimination between chromophore and protein bands in the Fourier transform infrared difference spectra. All infrared difference spectra display a prominent difference band attributable to a stretching mode with large contributions from the methine bridge between the inner pyrrole rings (B-C stretching). Due to mode coupling, frequencies and isotopic shifts of this mode suggest that the Pr chromophore may adopt a distorted ZZZssa or ZZZasa geometry with a twisted A-B methine bridge. The transition to lumi-R is associated with only minor changes of the amide I bands indicating limited protein structural changes during the isomerization site of the C-D methine bridge. Major protein structural changes occur upon the transition to Pfr in which the chromophore adopts a ZZEssa or ZZEasa-like state. In addition, specific interactions with the protein alter the structure of the B-C methine bridge as concluded from the substantial downshift of the respective stretching mode. These interactions are removed during the photoreaction to lumi-F (ZZE→ZZZ), which involves only small protein structural changes.     

Complex oligomeric structure of a truncated form of DdrA: a protein required for the extreme radiotolerance of Deinococcus

In order to preserve their genome integrity, organisms have developed elaborate tactics for genome protection and repair. The Deinococcus radiodurans bacteria famous for their extraordinary tolerance toward high doses of radiations or long period of desiccation, possess some specific genes with unknown function which are related to their survival in such extreme conditions. Among them, ddrA is an orphan gene specific of Deinococcus genomes. DdrA, the product of this gene was suggested to be a component of the DNA end protection system. Here we provide a three-dimensional reconstruction of the Deinococcus deserti DdrA((1-160)) by electron microscopy. Although not functional in vivo, this truncated protein keeps its DNA binding ability at the wild-type level. DdrA((1-160)) has a complex three-dimensional structure based on a heptameric ring that can self-associate to form a larger molecular weight assembly. We suggest that the complex architecture of DdrA plays a role in the substrate specificity and favors an efficient DNA repair.     

Non‐destructive dry matter estimation of Alhagi sparsifolia vegetation in a desert oasis of Northwest China

Question: Can above‐ground biomass of naturally growing Alhagi sparsifolia shrubs be estimated non‐destructively? Location: Qira oasis (37° 01′N, 80° 48′E, 1365 ma.s.l.) at the southern fringe of the Taklamakan desert, Xinjiang, NW China. Methods: Two methods were compared to estimate above‐ground biomass (AGB) of Alhagi. At first shrub AGB was estimated by manual ground measurements (called ‘allometric approach’) of length, width and height of 50 individuals. Subsequently regression equations were established between calculated shrub canopy volume and shrub AGB (r²= 0.96). These equations were used to calculate AGB from manual ground measurements in 20 sample plots within the Alhagi field. Secondly, kite‐based colour aerial photography coupled with the use of a Geographic Information System (called ‘GIS approach’) was tested. First and second order polynomial regressions between AGB data of the 50 individual shrubs and their respective canopy area allowed to automatically calculate the AGB of all remaining shrubs covered by the photograph (r²= 0.92 to 0.96). The use of non‐linear AGB regression equations required an automatised separation of shrubs growing solitary or in clumps. Separation criteria were the size and shape of shrub canopies. Results: The allometric approach was more reliable but also more time‐consuming than the GIS‐based approach. The latter led to an overestimation of Alhagi dry matter in densely vegetated areas. However, this systematic error decreased with increasing size of the surveyed area. Future research in this field should focus on improvements of AGB estimates in areas of high shrub density.